Construction of Staff Quarters Class (1 to 3 ) at New Civil Hospital Campus, Surat

Name of Work :- Construction of Staff Quarters Class (1 to 3 ) At New Civil Hospital Campus,Surat.

Memorandum showing items of works to be carried out

Quantities (Sor 2024-25 & Ele Sor 2026-27) Total Amount

Quantities (Sor 2024-25 & Ele Sor 2026-27) Total Amount

Item Estimated According to

Item of Works Unit

No. But may Be In Figures Estimated Quantites

More Or Less In Words Rs.Ps.

1 3.47 Clearing and grubbing road including uprooting rank vegetation grass bushes, shrubs , sapling and trees girth upto 300mm 34889.38 Rupees Thirty Four Thousand Eight Hectare

removal stumps of trees cut earlier and disposal of unserviceable (D) By mechanical means in area of thorny jungle. Hundred Eighty Nine And Paise

Thirty Eight Only

2 12078.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the 212.52 Rupees Two Hundred Twelve And cum

excavated stuff upto any lead and lift..(A)Loose or soft soil Paise Fifty Two Only

3 8634.00 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing 295.10 Rupees Two Hundred Ninety Five cum

off the excavated stuff up to any lead and lift (B) Dense or Hard soil And Paise Ten Only

4 4143.00 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful materialsand disposing 317.62 Rupees Three Hundred Seventeen cum

off the excavated stuff upto any lead and lift.(B) Dense or Hard soil And Paise Sixty Two Only

5 12078.00 Filling available excavated earth (Excluding rock) in trenches,plinth, sides, of foundation etc. in layer not exceeding 20 cm. in 136.92 Rupees One Hundred Thirty Six cum

depth consolidating each deposited layer by ramming and watering. And Paise Ninety Two Only

6 594.30 Filling in plinth with (good quality) sand under floors including watering, ramming, consolidating and dressing etc. complete. 481.80 Rupees Four Hundred Eighty One cum

And Paise Eighty Only

7 12094.00 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and 301.78 Rupees Three Hundred One And cum

consolidating etc. complete. Paise Seventy Eight Only

8 5984.00 Carring out plinth treatment to post construction / during construction by spraying chemical solution for termite control 87.03 Rupees Eighty Seven And Paise sqm

treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per Three Only

6131_paret-II Consentration Weight one percent is recommended i.e one litre 20EC chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre chemical emulsion appication at the rate of 5Litre chemical / Sqm of surface is

recommended as per I.S.

9 2125.00 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and 3741.69 Rupees Three Thousand Seven cum

curing complete Including cost of formwork in (A) Foundation and Plinth Hundred Forty One And Paise Sixty

10 14340.00 Providing throating or plaster drip / Groove and moulding to R.C.C. Chhajja. 43.74 Rupees Forty Three And Paise rmt

Seventy Four Only

11 3534099.00 Providing TMT Bar FE 550D Reinforcement for R.C.C. work including bending, binding and placing in position complete for 101.29 Rupees One Hundred One And kg

all Floor Level Paise Twenty Nine Only

12 5135.22 Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement 4891.96 Rupees Four Thousand Eight cum

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit Hundred Ninety One And Paise

mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Ninety Six Only

concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 410 kg ) for Footing/Raft

13 227.40 Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement 6576.01 Rupees Six Thousand Five Hundred cum

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit Seventy Six And Paise One Only

mixer for with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of centering

shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 410kg ) for

Columns up plinth level .

14 3382.80 Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work including all lift & 6357.58 Rupees Six Thousand Three cum

lead , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site Hundred Fifty Seven And Paise

of work in transit mixer for with all lead having continuous agitated mixer, manufactured as per mix design of specified grade Fifty Eight Only

for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of

centering shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per

IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 380 kg ) Columns for above plinth level for all Floor

15 94.33 Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement 5527.95 Rupees Five Thousand Five cum

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit Hundred Twenty Seven And Paise

mixer forwith all lead up having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced Ninety Five Only

cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of centering

shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 410 kg ) for

Vertical surface -up to plinth level

16 1919.88 Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , including all lift & 5309.52 Rupees Five Thousand Three cum

lead using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site Hundred Nine And Paise Fifty Two

of work in transit mixer for with all lead having continuous agitated mixer, manufactured as per mix design of specified grade Only

for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of

centering shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per

IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 380 kg ) for Vertical surface above plinth level up for all floor level.

17 774.56 Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement 6250.71 Rupees Six Thousand Two cum

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit Hundred Fifty And Paise Seventy

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for One Only

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of

centering shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per

IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410kg ) for Beam upto plinth level (Plinth Beam)

18 5243.48 Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , including all lift & 6561.59 Rupees Six Thousand Five Hundred cum

lead using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site Sixty One And Paise Fifty Nine

of work in transit mixer for with all lead up having continuous agitated mixer, manufactured as per mix design of specified Only

grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost

of centering shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per

IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 380 kg ) For Slab Beam up to all flor level.

19 7489.17 Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , including all lift & 6551.86 Rupees Six Thousand Five Hundred cum

lead using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site Fifty One And Paise Eighty Six

of work in transit mixer for with all lead having continuous agitated mixer, manufactured as per mix design of specified grade Only

for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of

centering shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per

IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 380 kg ) slab above plinth level for up to all floor level.

20 518.05 Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , including all lift & 6913.74 Rupees Six Thousand Nine cum

lead using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site Hundred Thirteen And Paise

of work in transit mixer for with all lead having continuous agitated mixer, manufactured as per mix design of specified grade Seventy Four Only

for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of

centering shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per

IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 380 kg ) Lintel & Rcc Bend for all floor level.

21 104.87 Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , including all lift & 6408.79 Rupees Six Thousand Four cum

lead using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site Hundred Eight And Paise Seventy

of work in transit mixer for with all lead having continuous agitated mixer, manufactured as per mix design of specified grade Nine Only

for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of

centering shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per

IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 380kg) Chhajjas for all floor level.

22 540.54 Providing and laying in position Ready Mix M-250 grade concrete for reinforced cement concrete work, including all lift & 6151.50 Rupees Six Thousand One Hundred cum

lead using cement content as per approved design Mix manufactured in fully automatic batching plant and transported to site Fifty One And Paise Fifty Only

of work in transit mixer for with all lead up having continous agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including grade for reinforced cement concrete work including pumping of R.M.C.

from transit mixer to site of laying and the cost of centering shuttering finishing and excluding reinforcement iincluding

providing and mixing admixture in recommanded proportions as per IS : 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer In Charge , Without Fly Ash

(Cement level 380 Kg.) Stair Case up to all floor level.

23 16580.10 Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of reinforcment for all Floor level 245.73 Rupees Two Hundred Forty Five cum

And Paise Seventy Three Only

24 274.00 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and 4245.09 Rupees Four Thousand Two cum

plinth in Cement Mortar 1:5 (1- Cement : 5 -fine sand)(B) Conventional Hundred Forty Five And Paise Nine

25 10485.00 Masonary work using Aerated light weight concrete block having crushing strength not less than 35 kg/sqcm for super 4867.08 Rupees Four Thousand Eight cum

structure above plinth level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical Specification for all floor Hundred Sixty Seven And Paise

As per inctruction of in chrge. Eight Only

26 1644.00 Provinding and fixing chicken wire mesh of gauge 0.18mm and 200 mm wide with necessary screws and nail at joints cracks 192.40 Rupees One Hundred Ninety Two sqm

of brick work R.C.C work as per drawing and specification and direction of Engineer incharge. And Paise Forty Only

27 1396.00 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) for wall lining (veneer work), 4235.68 Rupees Four Thousand Two sqm

backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with Hundred Thirty Five And Paise

white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: The rate Sixty Eight Only

shall include the cost of copper pin, cramps, dash fastners etc complete.Granite of any colour and shade and any size of stone

slab..(Red Lakha)

28 6840.00 Providing and laying 18 mm to 20 mm thick polished granite stone,telephonic Z black machine cut in single piece (maximum 3109.79 Rupees Three Thousand One sqm

available size), in sill and jambs of door, window and ventilation frames, laid over 10 mm thick cement mortar in proportion Hundred Nine And Paise Seventy

1:3 (1 cement:3 coarse sand) with Cement base Adhesives, jointed with grey cement slurry with matching pigment, including Nine Only

rubbing, polishing, and providing a 3 mm × 3 mm chamfer or Round Edge to all exposed edges, complete in all respects, with

colour and shade as approved by the Architect/Engineer-in-Charge, at all floor levels.

29 2082.00 Constructing Sandwitch Platform of 18-20 mm thick Polished telephonic Z Black Granite at top and 25 mm thick Kota 3748.11 Rupees Three Thousand Seven sqm

stone slab one side polished at bottom with cementing Materials / adhsives including makeing necessary grooves in Hundred Forty Eight And Paise

walls with Vertical sandwich two Kotastone 25 mm support every 60 cm centre to centre or as required including all labour Eleven Only

material of approved quality incl. full moulded round front edge granite strip of one side polished and jointed with grey

cement slurry including rubbing and polishing etc. including providing cutting for fixing kitchen/Laoratory sink (as directed)

600 mm x 450 mm x 200 mm size stainless steel sink / viterious china sink(as directed by engineer incharge) at required

position etc complete

30 4664.00 Flush Door (Laminated ) Providing and fixing of 35mm solid cored flush door with 1mm thick both side laminate in 5748.26 Rupees Five Thousand Seven sqm

approved shade as per selection on both side as shown in the drg. All exposed edges covered with Batten lipping of matching Hundred Forty Eight And Paise

shade of laminate . Rate shall Include Frame of Indian teak wood as per architect drawing ,SS Handle, Lock , Door Stopper, Twenty Six Only

S.S. heavy duty hinges etc. all materials and labour etc. complete as per detail drawing and instruction of engineer‐in charge

and consultant.

31 4378.00 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows 803.13 Rupees Eight Hundred Three And mtr

& other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and Paise Thirteen Only

natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)

fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws

having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum

compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category

with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold

fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. including M.S hold

fast/lugs or SS dash fasteners For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of

profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this

account shall be made.Frame size 50 x 100 mm

32 1614.00 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required 4250.29 Rupees Four Thousand Two sqm

size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ Hundred Fifty And Paise Twenty

rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Nine Only

kg/cum and screw withdrawal

strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire

retardant and fixing with stainless steel butt hinges of required size including all fixtures and fastners and accessories with

necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

33 766.00 3648.12 Rupees Three Thousand Six sqm

Provoding and fixing Decorative flush door shutters, solid core construction with frame of first class hardwood withcross Hundred Forty Eight And Paise

board and face veneer or plywood face panels,both side laminated(1.00mm thick) including S.S fixtures and fastners like Twelve Only

Handle, Lock , Door Stopper, Door Closer, S.S. heavy duty hinges necessary screws with all fitting & fixtures including (0.3

Sqm opening with Covering of s.s jali) all materials and labour etc. complete as per detail drawing and instruction of

engineer‐in charge and consultant/Architect. 35 mm thick.

34 45822.00 Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at required spacing and frame alround 115.77 Rupees One Hundred Fifteen And kg

square or round headed bolts and nuts or by screws.including applying a priming coat of red lead paint and two coats of oil Paise Seventy Seven Only

painting etc complete (A) Plain grill including Oil paint

35 401.00 Fire Rated DOOR 9267.61 Rupees Nine Thousand Two sqm

Supply of Single/Double Leaf galvanized steel fire rated doors as per IS 3614 : 2021 for 120min fire rating insulated door Hundred Sixty Seven And Paise

tested from NABL/Govt approved Lab. Door frames to be Single rebate profile of minimum section 100 x 57mm Sixty One Only

manufactured from minimum 18 gauge galvanized steel sheet, profile to have bending radius of 1.4 mm supplied in assembled

form ready to install at site. door shutter in 46mm +2 mm thick manufactured from minimum 18 gauge galvanized steel sheets,

lock seam jointed at stile edges to form a double skin fully flush shell. Infilled fire insulation ( mineralwool) material to be

provided for structural rigidity & additional reinforcements & sound Insulation. The internal construction of the door should

be appropriate for all hardware fixtures as required, vision panel grooves wherever applicable shall be provided as per

recommendations with beading and screw. The frame shall be infill with Mineralwool of density 96 Kg/ m3 MAKE Pacific

Fire door/Navair/Shakti Harmonn

36 37.00 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat 9108.48 Rupees Nine Thousand One qtl

of red lead paint and two or more coat synthetic enamel paint . (A)In beams and joists, channels angles Tees, flats, with Hundred Eight And Paise Forty

connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the Eight Only

37 78.00 Supply and installation of polycarbonate multilayered system, a complete assembly of extruded multilayer UV protected 4393.32 Rupees Four Thousand Three sqm

polycarbonate panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 18 Hundred Ninety Three And Paise

mm thick panel of 1200 mm width. Panels shall have six –seven layers with opaque and translucent clear combination as per Thirty Two Only

required lux level with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual

appearance. Panels shall be manufactured with vertical offset standing seam at both sides of the panel. Panels shall be fixed on

Purlin with snap on connectors with grip lock locking mechanism and will be secured on MS structure (will be paid Separately)

with 3 numbers self drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability

having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005. Panels to satisfy Dart drop

impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a

min. of 500 Hours as per ASTM G 155.Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested

on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 2.0 W/m2K as per EN ISO

10077-2:2018. Panel shall be with additional End cap / Aluminium U / F Profile / Glazing Bar (mill finish) for ends as

required. Panel shall be fixed over M S structural steel / MS purlin (paid separately) conforming to the detail technical

specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the

entire panel installation as per drawing & direction of the engineer in charge.

38 75101.00 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, 654.58 Rupees Six Hundred Fifty Four KG

grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts And Paise Fifty Eight Only

and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-

in_x0002_charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

39 4502.00 Providing and fixing S S Mosquito jali of approved quality for window and ventilations as and where required and directed by 454.50 Rupees Four Hundred Fifty Four sqm

engineer in charge. And Paise Fifty Only

40 6636.00 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6- 1019.39 Rupees One Thousand Nineteen sqm

coarse sand) or L.M. 1.1.5 (1-Lime putty And Paise Thirty Nine Only

:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade ofslab including

rubbing and polishing etc. complete. (A)25mm thick

41 996.00 Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on10mm thick 1130.79 Rupees One Thousand One sqm

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed withpigment to match the shade of Hundred Thirty And Paise Seventy

slab including rubbing Nine Only

and polishing etc. complete.

42 4151.00 Providing and laying rough chiseled dressed stone flooring over 20mm average thick base of cement mortar 1:5 (1-Cement : 5- 576.79 Rupees Five Hundred Seventy Six sqm

coarse sand) or L.M. 1:1.5 (1-Limeputty : 1.5 - coarse sand) including pointing with cementmortar 1:2 (1-cement : 2-stone And Paise Seventy Nine Only

dust) etc. complete. (A)25mm to 30 mm thick kota stone

43 33976.00 P & L 24" x 24" vitrified 8 to 10 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse 1092.37 Rupees One Thousand Ninety Two sqm

sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed And Paise Thirty Seven Only

with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade for all

floor.complete selection as directed by Architect/E.IC

44 2993.00 P & L 24" x 24" vitrified 8 to 10 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse 1467.72 Rupees One Thousand Four sqm

sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed Hundred Sixty Seven And Paise

with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit for all floor Seventy Two Only

45 3397.00 Providing and laying Vitrified tiles 8 to 10 mm thick , 24''x 24'' in skrting risers of steps and dedo on 10mm thickcement 1135.80 Rupees One Thousand One sqm

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry for all floor complete selection as directed by Hundred Thirty Five And Paise

Architect/E.IC Eighty Only

46 20004.00 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, 1513.28 Rupees One Thousand Five sqm

risers of steps and dedo including 10mm thick cement plaster 1:3 (10cement: 3 sand ) on wall surface and wall tiles laid with Hundred Thirteen And Paise

cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm Twenty Eight Only

thickness, including grouting of joints complete. (rate include of Tile Bonder in stand of cement)

47 4159.00 Providing and laying polished granite stone flooring in required design and pattern in linear as well as carvilinear portion of 2602.59 Rupees Two Thousand Six sqm

the building, all complete as per the architectural drawings with 18 -20 mm thick stone slab jet black, cherry red, elite brown, Hundred Two And Paise Fifty Nine

cat eye or any desired shade by engineer in charge over 20mm average thick base of cement mortar 1:4 (1 cement : 4 coarse Only

sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing

and pre finished nosing in treads of steps etc complete as specified and as directed by the engineer in charge .for all floor

48 2151.00 Providing and laying kota stone for shelves in cupboard and walls in single piece (Miximum 1.50 mt.) 18 mm-20 mm 609.03 Rupees Six Hundred Nine And sqm

including cutting grooves in walls and fixing the stone with neat cement slurry in true line and level as directed by the engineer Paise Three Only

in charge etc. complete for Shelves for all floor

49 2994.08 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick 1674.15 Rupees One Thousand Six Hundred sqm

Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light Seventy Four And Paise Fifteen

reflection 85% non-combustible as perB.S. 476 part IV, 100% humidity resistance and alsohaving thermalconductivity0.043° Only

w/m KC.for the bestthermal Insulation . The Light weight calcium Silicatetile shall be of approved texture Fine

fissured/Spintone/Cosmos having NRC value of 0.5 & Globehaving NRC value of 0.75 NRC or equivalent of size 595X

mm to be laid on true horizontal level suspendedinter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm includingboth side) consisting of main ‘T’ runner suitablyspacedat joints to get

required length and size of 24X38mmmade from 0.30 mm thick (minimum) sheet, 1200mmcentre to centre, and cross ‘T’ of

size 24X28mm madeout of 0.33mm (Minimum) sheet spaced 1200mm alongspaced between main ‘T’ at 600mm centre to

centre toform agrid of 1200X600mm and secondary cross ’T’ oflength 600mm and size 24x28mm made of 0.30 mm

thick(Minimum) sheet to be interlocked at middle of the1200X600mm panel to form grid of size 600X600mm resting on

periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick

(minimum) sheet with the help of rawl plugs at 450mm centreto centre with 25mm long drywall screws @ 230mm interval and

laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) inthe grid

including, cutting /making opening for serviceslike diffusers, grills, light fittings, fixtures, smokedetectors etc., wherever

required, Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size25X35X1.6mm fixed to ceiling with 12.5mm dia and50mm long dash

fasteners, 4mm G.I. adjustable rodswith galvanized steel level clips of size 85X30X0.8mm,spaced at 1200mm centre to centre

long main ‘T’ bottomexposed with 24mm of all T-sections shall be pre-paintedwith polyester baked paint, for all heights, as

perspecifications, drawings and as directed byengineer-in-charge.Note:- Only calcium silicate falseceiling area will be

measured from wall to wall. Nodeduction shall be made for exposed frames/opening (cutouts) having area less than 0.30 sqm.

The calciumsilicate ceiling tiles shall have NRC. Value of 0.50(Minimum) for Fine fissured/Spintone/Cosmos and 0.75NRC

for Globe, light reflection 85% non-combustible asper B.S. 476 part IV, 100% humidity resistance and alsohaving thermal

conductivity. 0.043° w/m KC.for the best

thermal Insulation

50 74046.00 Providing 10 mm thick Cement Plaster in single coat on brick/concrete wall/Ceiling for interior plastering at various level as 322.10 Rupees Three Hundred Twenty sqm

below finished even and smooth in(i) Cement mortar 1:3 (1‐cement :3‐ sand) as required to receive specified architectural Two And Paise Ten Only

finish (like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc this item shall be including all heights and levels

51 94937.10 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering 346.15 Rupees Three Hundred Forty Six sqm

upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) for all floor And Paise Fifteen Only

52 49401.45 20mm thick sand faced cement plaster /Mala plaster on walls upto consisting of 12mm thick backing coat of C.M. 1:3 (1- 487.71 Rupees Four Hundred Eighty Seven sqm

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete for all floor level Heights And Paise Seventy One Only

53 168983.73 Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even 40.59 Rupees Forty And Paise Fifty Nine sqm

shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered Only

smooth.for all floor

54 94937.10 Wall painting (Three coats) with plastic emulsion paint of approved brand & manufacture on under coated wall surface to give 83.36 Rupees Eighty Three And Paise sqm

an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered Thirty Six Only

smooth.for all floor

55 74046.36 Ceilling painting (Three coats) with plastic emulsion paint of approved brand & manufacture on under coated wall surface to 89.04 Rupees Eighty Nine And Paise Four sqm

give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand Only

papered smooth.for all floor

56 3600.00 Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, 105.31 Rupees One Hundred Five And sqm

oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed Paise Thirty One Only

priming paint brushing red lead. & Painting two coats (excluding priming coat) on new steel and other metal surface with

synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter

57 54346.25 Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm for 189.50 Rupees One Hundred Eighty Nine sqm

each coat) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.(Note : This item included exterior And Paise Fifty Only

paint of required shade over textured surface).

58 2052.30 Providing and fixing Glass reinforced concrete (GRC) screens synthetic rubber /FRP moulded in size, pattern, design, 3988.59 Rupees Three Thousand Nine sqm

thickness and colour of approved quality/make. The screens made of 53 grade white cement, quartz, fine silica sand, alkali Hundred Eighty Eight And Paise

resistant glass fibre, super plasticiser, polymers and UV resistant synthetic inorganic pigments etc including dry fixing with Fifty Nine Only

stainless steel 304 grade "L" shaped cramps , dash fasteners etc complete.

59 3654.80 Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 2140.59 Rupees Two Thousand One sqm

1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical Hundred Forty And Paise Fifty

member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding\ shutters of horizontal member size 40 Nine Only

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with

mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures including stainless

steel mosqito net jali shutter and transparent silicon sealant fixing to frame as per details etc

60 842.20 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with 1175.56 Rupees One Thousand One sqm

colour Powder Coated alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation Hundred Seventy Five And Paise

61 4471.00 Providing Brick Bat Water Proofing treatment to floor and walls of water tank, w.c. & bath area, through approved agencies 808.00 Rupees Eight Hundred Eight Only sqm

preparing floor and wall for water proofing work/ by chasing/cutting as per the companies requirement. Providing a layer of

plaster with waterproofing compound/ admixture about 25 mm thick in the floor / depression and about 1`8 mm on the

sidewalls / depression upto the floor level. The waterproof plaster about 18 mm thick to be continued on the walls above the

floor level for a height of 600 mm with surface suitable to receive further finishing treatment all complete as per companies

Specifications and instructions and as directed for all heights and floors. The round vata shall be included in this in SMT and

shall be taken upto top of round on wall etc complete as directed by EIC at For All Floor

62 5479.00 Providing and laying water proofing treatment on terrace including applying neat cement slurry 2.75kg/cm2 on cement 1187.76 Rupees One Thousand One sqm

admixed with water proofing component after cleaning the surface /laying cement concrete with brick bat 75 mm to 100 mm Hundred Eighty Seven And Paise

thick with 50%of C.M. 1:5 to required slope including ramming at junction of wall and slab after two days of proper curing Seventy Six Only

applying broken china mosaic flooring for plain and curve surface 12mm to 20mm white colour broken piece of glazed tiles

to be laid over 12mm thick cement mortar bedding of CM (1:3) to plain and slop and to be tampered to bring mortar cream up

to surface with using white cement and incl. Rounding of junctions and extending them up to 15 cm along the wall and curing

with bends any patterns or design as per drawing and direction incl. cleaning with water and oxalic acid. and Providing and

laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as

63 300000.00 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection 3.95 Rupees Three And Paise Ninety ltr

etc. complete on terrace Five Only

64 2100.00 Providing and fixing pre-cast Rubber Dye/ steel Dye interlocking concrete block 60mm thick with grade of concrete M300 706.93 Rupees Seven Hundred Six And sqm

pnumatic compressed/ vibrated mechanically and as per approved design Confirming to IS15658:2006 including 35mm Sand Paise Ninety Three Only

layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

65 2500.00 Providing and ixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm 404.21 Rupees Four Hundred Four And Rmt

thick of M200 grade concret as per approved design and including excavation for fixing in proper line and level ,filling the Paise Twenty One Only

joint with C:M 1:3(1cement:3 fine sand) etc complete.

66 210.00 Providing and applying 2.5 mm thick road marking strips (retro_x005f_x005f_x005f_x0002_reflective) of specified shade/ 633.72 Rupees Six Hundred Thirty Three sqm

colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile And Paise Seventy Two Only

shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface

including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc.

complete as per direction of Engineer-in-charge and accordance with applicable specifications.

67 2400.00 Providing laying (to level or slopes) and jointing reinforced concrete heavy duty non-pressure pipes I.S. class NP2 of the 1077.15 Rupees One Thousand Seventy Rmt

following internal diameter with collars Seven And Paise Fifteen Only

and butt ends prepared for collar joints including testingof joints complete.(E) 450mm

68 1551.00 Supplying and stacking at site dump manure from approved source, including carriage (manure measured in stacks will be 256.69 Rupees Two Hundred Fifty Six And sqm

reduced by 8% for payment) : Screened through sieve of I.S. designation 20mm Paise Sixty Nine Only

69 1250.00 Providing laying (to level or slopes) and jointing reinforced concrete heavy duty non-pressure pipes I.S.class NP2 of the 678.02 Rupees Six Hundred Seventy Eight Rmt

following internal diameter with collars and butt ends prepared for collar joints including testingof joints complete.(D) 300mm And Paise Two Only

70 13955.00 Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Engineer -in-charge (Cost of 52.87 Rupees Fifty Two And Paise Eighty sqm

sludge, dump manure and / or good earth to be paid separately). Seven Only

71 13955.00 Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer -in-charge. 36.92 Rupees Thirty Six And Paise sqm

Ninety Two Only

72 41315.70 Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a 13.43 Rupees Thirteen And Paise Forty sqm

thick lawn, free from weeds and fit for mowing including supplying good earth, if needed -With grass Turf Three Only

73 250.00 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth 225.08 Rupees Two Hundred Twenty Five sqm

of 30 cm, refilling the excavated earth after breaking clods and mixing withsludge or manure in the ratio of 8:1 (8 parts of And Paise Eight Only

stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%),

flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc.including stacking and

disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift

up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).

74 41315.70 Supplying & Stacking of Selection No.1 doob grass turf at site fresh & free from weeds having proper roots in green including 51.31 Rupees Fifty One And Paise Thirty sqm

loading, unloading, carriage and all taxes paid etc.and as per direction of Engineer - in -charge. One Only

75 842.00 Providing and fixing white vitreous china wall mounting water closet of size 64X35.5X38.5 cm of approved shape including 10152.52 Rupees Ten Thousand One each

providing & fixing cistern with dual flush fitting, of flushing capacity 2 litre/ 4 litre (adjustafle to 4 litre/8 litres), including Hundred Fifty Two And Paise Fifty

seat cover, and cistern fittings, nuts, bolts and gasket etc complete Make -20151-Hindware./Eqivalent brand As Per Approved Two Only

by Engineer InCharge .

76 842.00 Providing and fixing toilet paper holder : C.P. brass As Per Approved by Engineer InCharge . 680.65 Rupees Six Hundred Eighty And each

Paise Sixty Five Only

77 842.00 Providing and fixing white vitreous china wash basin counter Top basin, with including 32 mm CP brass waste coupling, 4619.74 Rupees Four Thousand Six each

including painting of fittings and brackets, cutting and making good the walls wherever required all complete Hundred Nineteen And Paise

Seventy Four Only

78 842.00 Providing and fixing CP brass single lever basin mixer without popo with 450mm long braided hose (connection pipe) 2668.42 Rupees Two Thousand Six each

basin pillar tap of Jaquar LYR-38001B or Equivalent as approved by Engineer- In Charge Hundred Sixty Eight And Paise

79 842.00 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in- 876.95 Rupees Eight Hundred Seventy Six each

charge. And Paise Ninety Five Only

80 842.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood 859.41 Rupees Eight Hundred Fifty Nine each

sheet and fixing to wooden pluge with C.P. brass screws and washers.as per the direction of Engineer-in-charge. And Paise Forty One Only

81 330.00 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 5886.10 Rupees Five Thousand Eight each

40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink Hundred Eighty Six And Paise Ten

with drain board:510x1040 mm bowl depth 250 mm As Per Approved by Engineer InCharge . Only

82 2225.00 Providing and laying S&S centrifugally cast (spun) iron pipes (Class150 mm dia pipe (used in Basement Ceiling LVL) 1726.27 Rupees One Thousand Seven meter

Hundred Twenty Six And Paise

Twenty Seven Only

83 9726.76 Providing, laying and jointing in true line and level 75 diametre U.P.V.C (TypeB) conforming to IS13592-1992 with one end 443.39 Rupees Four Hundred Forty Three rmt

plain and othe rend socketed with rubberring, & fittings conforming to ISI14735-1999 of approved make for drainage system And Paise Thirty Nine Only

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

75 mm diametre x149mm length x145mm heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

84 26843.36 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (TypeB) conforming to IS13592-1992 with one end 834.38 Rupees Eight Hundred Thirty Four rmt

plain and othe rend socketed with rubberring, & fittings conforming to ISI14735-1999 of approved make for drainage system And Paise Thirty Eight Only

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

110 mm diametre x149mm length x145mm heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

85 3032.00 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (TypeB) conforming to IS13592-1992 with one end 878.57 Rupees Eight Hundred Seventy rmt

plain and othe rend socketed with rubberring, & fittings conforming to ISI14735-1999 of approved make for drainage system Eight And Paise Fifty Seven Only

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

110 mm diametre x149mm length x145mm heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

86 145.00 Providing and fixing in position cowel went to pipes.(B)75mm dia. 393.04 Rupees Three Hundred Ninety EACH

Three And Paise Four Only

87 145.00 Providing and fixing in position cowel went to pipes.(C)100mm dia 653.09 Rupees Six Hundred Fifty Three EACH

And Paise Nine Only

88 145.00 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm 1246.92 Rupees One Thousand Two EACH

x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type E Hundred Forty Six And Paise

Ninety Two Only

89 40.00 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength 2932.93 Rupees Two Thousand Nine EACH

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of Hundred Thirty Two And Paise

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- Ninety Three Only

cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line

90 40.00 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength 3660.76 Rupees Three Thousand Six EACH

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of Hundred Sixty And Paise Seventy

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- Six Only

cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside

dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

91 2436.00 Providing and fixing floor drain consisting of 100x50mm s/s elbow (grating to be paid separately), complete as per 557.52 Rupees Five Hundred Fifty Seven each

instructions. And Paise Fifty Two Only

92 4740.00 Providing and fixing 125 mm dia S/S grating (with or without hole)for floor or Nahani trap. 349.46 Rupees Three Hundred Forty Nine each

And Paise Forty Six Only

93 842.00 Providing and fixing of 600mm long towel rail (SS-316 grade), all complete with required acceessories as directed by the 1963.44 Rupees One Thousand Nine each

Engineer-in-Charge. Hundred Sixty Three And Paise

Forty Four Only

94 842.00 Providing and fixing CP brass with soap dish holder with all complete as directed by the Engineer-in-Charge. 957.48 Rupees Nine Hundred Fifty Seven each

And Paise Forty Eight Only

95 421.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes under floor for soil and waste water , complete with 439.62 Rupees Four Hundred Thirty Nine metre

fittings and clamps, i/c cutting and making good the walls etc.32 mm dia nominal bore And Paise Sixty Two Only

96 421.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes under floor for soil and waste water , complete with 595.72 Rupees Five Hundred Ninety Five metre

fittings and clamps, i/c cutting and making good the walls etc. 40 mm dia nominal bore And Paise Seventy Two Only

97 421.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes under floor for soil and waste water , complete with 791.65 Rupees Seven Hundred Ninety One metre

fittings and clamps, i/c cutting and making good the walls etc.50 mm dia nominal bore And Paise Sixty Five Only

98 3116.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, 283.90 Rupees Two Hundred Eighty Three metre

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of And Paise Ninety Only

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing

of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall20 mm nominal outer dia Pipes

99 4507.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, 339.83 Rupees Three Hundred Thirty Nine metre

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of And Paise Eighty Three Only

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing

of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall25 mm dia nominal bore

100 2404.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, 439.62 Rupees Four Hundred Thirty Nine metre

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of And Paise Sixty Two Only

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing

of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall32 mm dia nominal bore

101 3279.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, 595.72 Rupees Five Hundred Ninety Five metre

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of And Paise Seventy Two Only

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing

of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall40 mm dia nominal bore

102 1003.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, 791.65 Rupees Seven Hundred Ninety One metre

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of And Paise Sixty Five Only

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing

of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall50 mm dia nominal bore

103 1539.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, 1472.58 Rupees One Thousand Four metre

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of Hundred Seventy Two And Paise

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing Fifty Eight Only

of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall65 mm dia nominal bore

104 2520.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, 1676.60 Rupees One Thousand Six Hundred metre

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of Seventy Six And Paise Sixty Only

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing

of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall80 mm dia nominal bore

105 7072.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, 421.87 Rupees Four Hundred Twenty One metre

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of And Paise Eighty Seven Only

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing

of joints complete as per direction of Engineer in Charge.Concealed work,including cutting chases and making good the wall

etc.15 mm nominal outer dia Pipes

106 5300.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, 455.59 Rupees Four Hundred Fifty Five metre

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of And Paise Fifty Nine Only

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing

of joints complete as per direction of Engineer in Charge.Concealed work,including cutting chases and making good the wall

etc.20 mm nominal outer dia Pipes

107 4402.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, 531.56 Rupees Five Hundred Thirty One metre

including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of And Paise Fifty Six Only

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing

of joints complete as per direction of Engineer in Charge.Concealed work,including cutting chases and making good the wall

etc.25 mm dia nominal bore

108 3064.00 Providing and fixing Forged Brass Ball Valve (Screwed). with setting and gland of superior quality having minimum working 537.67 Rupees Five Hundred Thirty Seven each

pressure of 16 kg/cm2. 20 mm nominal bore And Paise Sixty Seven Only

109 157.00 Providing and fixing Forged Brass Ball Valve (Screwed). with setting and gland of superior quality having minimum working 595.80 Rupees Five Hundred Ninety Five each

pressure of 16 kg/cm2. 25 mm nominal bore And Paise Eighty Only

110 10.00 Supply ,Erection , Testing & Commissioning of Automatic water level control panel & related accessories for pumping 21616.02 Rupees Twenty One Thousand Six each

automation with consisting of automatic water level controller , level sensor with stainless steel probe, motorized butterfly Hundred Sixteen And Paise Two

valve, motorized valve controller with complete in all respect.upto 50 mm dia. nominal bore Only

111 6042.00 Providing and fixing Stainless steel braided connection pipe with brass 235.33 Rupees Two Hundred Thirty Five each

unions :45 cm length15 mm nominal bore And Paise Thirty Three Only

112 6042.00 Providing and fixing C.P. brass angle valve / Angular stop cock with wall flange for basin mixer and geyser points of approved 767.60 Rupees Seven Hundred Sixty Seven each

quality CP brass extension pipe all of approved engineer-in-charge And Paise Sixty Only

113 842.00 Providing and fixing hand held ablution fitting (health faucet) with one meter long flexible tube and wall hook, all complete 2072.52 Rupees Two Thousand Seventy each

approved engineer-in-charge Two And Paise Fifty Two Only

114 1645.00 Providing and fixing screw down bib taps of followingsize.(B) Brass chromium plated screws down Bib Tap. (ii)20mm dia 214.81 Rupees Two Hundred Fourteen each

And Paise Eighty One Only

115 25.00 Providing and fixing ball cock of approved. quality asdirected.(A) Copper Metal (ii) 50mm dia. 189.84 Rupees One Hundred Eighty Nine each

And Paise Eighty Four Only

116 842.00 Supply and fixing of 15mm CP brass 2 -Way Bib Cock with wall flange and suitable length CP brass extension pipe all of 1272.60 Rupees One Thousand Two each

approved engineer-in-charge Hundred Seventy Two And Paise

117 330.00 Providing and fixing Sink Mixer With Regular Swinging Spout(Wall Mounted Model) With ConnectingLegs & Wall Flanges ( 4228.87 Rupees Four Thousand Two each

cat. No. LYR-38309 equivalent ) of approved quality Hundred Twenty Eight And Paise

Eighty Seven Only

118 330.00 Providing and fixing Sink Cock with Regular SwingingSpout (Wall Mounted Model) With 1682.66 Rupees One Thousand Six Hundred each

Wall Flange ( cat. No. LYR-38347S equivalent ) of approved quality Eighty Two And Paise Sixty Six

119 842.00 Providing and fixing C.P. brass overhead shower 150 x 150 mm square shape multi flow (ABS Body chrome plated with gray 3158.27 Rupees Three Thousand One each

face plate ) with rubit cleaning system with wall flange etc ( Hindware Cat No : F160216CP) ( Hindware Cat No : Hundred Fifty Eight And Paise

F160157)/Eqivalent brand As Per Approved by Engineer InCharge . Twenty Seven Only

120 842.00 Providing and fixing C.P Bath and Shower Wall mixer 3 in 1 System with Provision for Both Heand Shower and Overhead 5670.14 Rupees Five Thousand Six Hundred each

Shower with 115mm long Bend pipe wall Flange. ( Hindware Cat No : F280022)Eqivalent brand As Per Approved by Seventy And Paise Fourteen Only

Engineer InCharge .

121 6.00 Supplying, installing, testing and commissioning of flooded Vertical Inline cetrifugal pump set with stainless steel body , 96969.09 Rupees Ninety Six Thousand Nine set

stainless steel impller and SS shaft capable to deliver of following capacity and head. given by TFC squirrels induction motor Hundred Sixty Nine And Paise

suitable for operation on 415 volt , 50 HZ AC power supply running speed 2900 RPM .The installation shall be complete with Nine Only

all necessary ancillaries & accessories including base plate , coupling guard etc complete as required. Flow rate :

LPM Head : 70 MtsRequired for : UG T ( Domestic Water & Flusing Water )

122 4.00 Supply, installation, testing and commissioning of continuous duty submersible centrifugal non-clogging drainage pumps 75750.00 Rupees Seventy Five Thousand set

complete with 3 phase motor with all necessary protection and mechanical seal etc. complete with all ancillaries etc Seven Hundred Fifty Only

required.Flow rate : 100 LPM Head : 15 Mts Solid Handling : 10 – 12 MM Purpose :

Drainage MOC : CI

123 4.00 (a) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 363062.48 Rupees Three Lakh(s) Sixty Three Set

suitable for automatic operation and consisting of following, complete in all respects, as required ,(b) Horizontal type, Thousand Sixty Two And Paise

multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as Forty Eight Only

required. (c) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on

volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation,

conforming to IS-12615: 2018. (d) M.S. fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as

required. (e)Suitable cement concrete foundation duly plastered with anti vibration pads. Note: *The head of the pump is

selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point. 2280 lpm at 88 m Head

124 4.00 (a) Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469: 2019 570931.60 Rupees Five Lakh(s) Seventy Set

suitable for automatic operation and consisting of following,complete in all respects, as required : (Diesel Driven Pump) (b) Thousand Nine Hundred Thirty

Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical One And Paise Sixty Only

seal as required. (c) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard

complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m

outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential

silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio

indications, painted with post office red colour etc. as required. (d) M.S fabricated, common base plate, coupling,coupling

guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly

plastered and with anti vibration pads.2280 lpm at 88M. head

125 4.00 (a) Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469: 2019 114841.28 Rupees One Lakh(s) Fourteen Set

suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) (b) Thousand Eight Hundred Forty One

Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal And Paise Twenty Eight Only

as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC

supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class- 'F' insulation, conforming to IS-

12615: 2018. (d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable

cement concrete foundation duly plastered and with anti vibration pads180 lpm, at 88M head

126 4.00 Designing, Supply, Installation, Testing and Commissioning of system controller to control operation of Main Electric Fire 401899.54 Rupees Four Lakh(s) One Thousand Set

Pump, Diesel Pump, Pressurisation Pump, in sequence as per specification consisting of relays, times, sensors, annunciation Eight Hundred Ninety Nine And

window for fault indication, complete as per specification. Paise Fifty Four Only

127 8.00 Supplying and making end termination with brass Compression Gland & Al.lugs for following sizes of PVC insulated, PVC 1143.52 Rupees One Thousand One Set

sheathed/XLPE Al.conductor cables of 1.1 KV grade as required3.5x300 sq.mm Hundred Forty Three And Paise

128 8.00 Supplying and making end termination with brass Compression Gland & Al.lugs for following sizes of PVC insulated, PVC 414.27 Rupees Four Hundred Fourteen Set

sheathed/XLPE Al.conductor cables of 1.1 KV grade as required3.5x50 sq.mm And Paise Twenty Seven Only

129 48.00 Supplying and making end termination with brass Compression Gland & Al.lugs for following sizes of PVC insulated, PVC 319.26 Rupees Three Hundred Nineteen Set

sheathed/XLPE Al.conductor cables of 1.1 KV grade as required4x25 sq.mm And Paise Twenty Six Only

130 32.00 Supplying and making end termination with brass Compression Gland & Al.lugs for following sizes of PVC insulated, PVC 594.02 Rupees Five Hundred Ninety Four Set

sheathed/XLPE Al.conductor cables of 1.1 KV grade as required 3x120 sq.mm And Paise Two Only

131 60.00 Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more 587.17 Rupees Five Hundred Eighty Seven Meter

than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts And Paise Seventeen Only

& nuts, painting suspenders etc. as required.150 mm width x 50mm depth x 1.6 mm thickness.

132 200.00 Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more 741.24 Rupees Seven Hundred Forty One metre

than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts And Paise Twenty Four Only

& nuts, painting suspenders etc. as required.300 mm (W) x 50 mm (D) x 1.6 mm (T)

133 480.00 Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of 1.1 KV grade 457.53 Rupees Four Hundred Fifty Seven Meter

Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI And Paise Fifty Three Only

/Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred. 4 core, 25 sq.mm. Aluminium

134 400.00 Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of 1.1 KV grade 685.79 Rupees Six Hundred Eighty Five Meter

Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI And Paise Seventy Nine Only

/Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred. 3.5 core, 50 sq.mm. Aluminium

135 200.00 Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of 1.1 KV grade 1198.87 Rupees One Thousand One Meter

Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI Hundred Ninety Eight And Paise

/Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred. 3 core, 120 sq.mm. Aluminium Eighty Seven Only

136 300.00 Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of 1.1 KV grade 3246.14 Rupees Three Thousand Two Meter

Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI Hundred Forty Six And Paise

/Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred. 3.5 core, 300 sq.mm. Aluminium Fourteen Only

137 8.00 Earthing with GI Earth plate 600 mm x 600 mm x 6 mm th.including accessories and providing masonry enclosure with cover 7147.89 Rupees Seven Thousand One Set

plate having locking arrangement and watering pipe with charcoal or coke and salt complete as required. Hundred Forty Seven And Paise

Eighty Nine Only

138 300.00 Providing & fixing 25 mm x 5 mm G.I. Strip in 40 mm dia GI pipe from earth electrode including connections with GI nut, 646.23 Rupees Six Hundred Forty Six And metre

bolt, spring, washer excavation and re-filling etc. as required. Paise Twenty Three Only

139 200.00 Providing & fixing 25 mm x 5 mm G.I. Strip in on surface or in recess for connections etc as required. 245.65 Rupees Two Hundred Forty Five metre

And Paise Sixty Five Only

140 200.00 Providing and fixing 6 SWG dia G.I wire on surface or in recess for loop earthing as required. 71.90 Rupees Seventy One And Paise metre

141 583.00 Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like 4368.67 Rupees Four Thousand Three metre

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including excavation & providing cement concrete blocks as Hundred Sixty Eight And Paise

supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete Sixty Seven Only

as required.(150 mm dia)

142 118.80 Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like 2543.18 Rupees Two Thousand Five metre

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including excavation & providing cement concrete blocks as Hundred Forty Three And Paise

supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete Eighteen Only

as required.(100 mm dia)

143 115.00 Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like 2313.91 Rupees Two Thousand Three metre

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including excavation & providing cement concrete blocks as Hundred Thirteen And Paise Ninety

supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete One Only

as required.(80 mm dia)

144 115.50 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings 5666.27 Rupees Five Thousand Six Hundred metre

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting Sixty Six And Paise Twenty Seven

with two or more coats of synthetic enamel paint of required shade complete as required.(200 mm dia) Only

145 346.50 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings 3679.65 Rupees Three Thousand Six metre

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting Hundred Seventy Nine And Paise

with two or more coats of synthetic enamel paint of required shade complete as required.(150 mm dia) Sixty Five Only

146 798.16 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings 2633.71 Rupees Two Thousand Six metre

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting Hundred Thirty Three And Paise

with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia Seventy One Only

147 682.66 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings 1948.96 Rupees One Thousand Nine metre

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting Hundred Forty Eight And Paise

with two or more coats of synthetic enamel paint of required shade complete as required.(80 mm dia) Ninety Six Only

148 92.40 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings 1673.35 Rupees One Thousand Six Hundred metre

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting Seventy Three And Paise Thirty

with two or more coats of synthetic enamel paint of required shade complete as required.(65 mm dia) Five Only

149 154.00 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings 1332.68 Rupees One Thousand Three metre

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting Hundred Thirty Two And Paise

with two or more coats of synthetic enamel paint of required shade complete as required.50 mm dia Sixty Eight Only

150 115.50 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 and 1239 including fittings 787.46 Rupees Seven Hundred Eighty metre

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting Seven And Paise Forty Six Only

with two or more coats of synthetic enamel paint of required shade complete as required.(25 mm dia)

151 96.00 Supplying and fixing single headed internal hydrant valve with instantanous Gun metal couplings of 63mm dia with cast iron 7025.49 Rupees Seven Thousand Twenty each

wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal cap and chain as required Five And Paise Forty Nine Only

152 7.00 Supplying, fixing, testing and commissioning of following size butterfly valve (manual) with CI body SS disc nitrile sheet & O- 3521.30 Rupees Three Thousand Five each

ring & PN 1.6 pressure rating as specified.50 mm dia Hundred Twenty One And Paise

153 21.00 Supplying, fixing, testing and commissioning of following size butterfly valve (manual) with CI body SS disc nitrile sheet & O- 4627.17 Rupees Four Thousand Six each

ring & PN 1.6 pressure rating as specified.80 mm dia Hundred Twenty Seven And Paise

154 14.00 Supplying, fixing, testing and commissioning of following size butterfly valve (manual) with CI body SS disc nitrile sheet & O- 6223.48 Rupees Six Thousand Two each

ring & PN 1.6 pressure rating as specified.100 mm dia Hundred Twenty Three And Paise

Forty Eight Only

155 7.00 Supplying, fixing, testing and commissioning of following size butterfly valve (manual) with CI body SS disc nitrile sheet & O- 8334.21 Rupees Eight Thousand Three each

ring & PN 1.6 pressure rating as specified.150 mm dia Hundred Thirty Four And Paise

Twenty One Only

156 7.00 Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN with non rising spindle, bronze/gun 20514.98 Rupees Twenty Thousand Five each

metal seat, ISI marked complete with nuts bolts washers, gaskets and conforming to IS 780 of following size asrequired: 150 Hundred Fourteen And Paise

mm dia Ninety Eight Only

157 7.00 Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN with non rising spindle, bronze/gun 35423.61 Rupees Thirty Five Thousand Four each

metal seat, ISI marked complete with nuts bolts washers, gaskets and conforming to IS 780 of following size asrequired: 200 Hundred Twenty Three And Paise

mm dia Sixty One Only

158 82.00 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted 1229.12 Rupees One Thousand Two each

between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 Hundred Twenty Nine And Paise

complete as required. Twelve Only

159 7.00 Supplying, fixing, testing and commissioning, of following sizes of non return valve with C I body.(80 mm dia) 7065.72 Rupees Seven Thousand Sixty Five each

And Paise Seventy Two Only

160 42.00 Supplying, fixing, testing and commissioning, of following sizes of non return valve with C I body.(100 mm dia) 10145.37 Rupees Ten Thousand One each

Hundred Forty Five And Paise

Thirty Seven Only

161 28.00 Supplying, fixing, testing and commissioning, of following sizes of non return valve with C I body.(150 mm dia) 16163.42 Rupees Sixteen Thousand One each

Hundred Sixty Three And Paise

162 7.00 Supplying, fixing, testing and commissioning of following size Y-Strainer of ductile CI body flanged ends with stainless steel 9999.00 Rupees Nine Thousand Nine each

strainer as specified.(150 mm dia) Hundred Ninety Nine Only

163 14.00 Supplying, fixing, testing and commissioning of following size Y-Strainer of ductile CI body flanged ends with stainless steel 20175.17 Rupees Twenty Thousand One each

strainer as specified.(200 mm dia) Hundred Seventy Five And Paise

164 82.00 Supplying and fixing 63mm dia, 15mtr. Long RRL hose pipe with 63mm dia Male and Female Gun metal couplings duly 4669.11 Rupees Four Thousand Six each

binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required. Hundred Sixty Nine And Paise

165 82.00 Supplying and fixing First-Aid-Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with 9534.40 Rupees Nine Thousand Five each

upto date amendments, complete with the following as required.30 m long 20mm (nominal internal) dia water hose Hundred Thirty Four And Paise

Thermoplastic (Textile reinforced) Type-2 as per IS: 1258520 mm (nominal internal) dia gun metal globe valve & Forty Only

nozzle.Drum and brackets for fixing the equipments on wall.Connections from riser with 40 mm dia stop valve (gun metal) &

166 82.00 Providing and fixing Fire hose cabinet door (40mm x 40mm x 5mm) angle depth fabricated with 2100mm x 1200mm MS 24891.45 Rupees Twenty Four Thousand each

sheet. Complete in all respect with 25mmx25mmx3mm angle frame all around and stiffened in between i/c hinges, handle, Eight Hundred Ninety One And

locking arrangement, painting with approved synthetic enamel paint i/c sign writing on glass at internal hydrant including Paise Forty Five Only

providing & fixing S.S. sheet 2mm thick on remaining portion above door to close opening i/c painting etc. as required. Glass

shall be 6 mm thick.

167 82.00 Supply and fixing 63mm dia Gun Metal branch pipe with 20mm (nominal internal diameter) size Gun Metal nozzle 4259.98 Rupees Four Thousand Two each

conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required. Hundred Fifty Nine And Paise

Ninety Eight Only

168 7.00 Supplying and fixing following fire brigade connection of cast iron body with Gun metal male instantaneous inlet couplings 6215.78 Rupees Six Thousand Two each

complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required.2 Way FBC of Hundred Fifteen And Paise Seventy

Cl body Eight Only

169 7.00 Supplying and fixing following fire brigade connection of cast iron body with Gun metal male instantaneous inlet couplings 12684.91 Rupees Twelve Thousand Six each

complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required.4 Way FBC of Hundred Eighty Four And Paise

Cl body Ninety One Only

170 21.00 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with Air release valve on top 16606.79 Rupees Sixteen Thousand Six each

and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure Hundred Six And Paise Seventy

gauge and painting with synthetic enamel pain of approved shade as required. Nine Only

171 21.00 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 1429.40 Rupees One Thousand Four each

Hundred Twenty Nine And Paise

172 14.00 Providing & fixing Auto Air release valve for fire hydent and sprinkler, suitable for pressure not less than 15 Kg/Sq.cm.25 4169.28 Rupees Four Thousand One each

mm dia Hundred Sixty Nine And Paise

Twenty Eight Only

173 96.00 Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required 1276.20 Rupees One Thousand Two each

Hundred Seventy Six And Paise

174 96.00 Providing and fixing stainless steel standard Fireman's Axe with heavy insulated rubber handle tested to 20000 volts as per IS : 847.39 Rupees Eight Hundred Forty Seven each

926 complete. And Paise Thirty Nine Only

175 7.00 Providing, installing, testing & commisioning of fire brigade draw out connection (fire department connection) with suction 9175.85 Rupees Nine Thousand One each

pipe MS class 'C' 100 mm dia. & 100 mm dia. foot valve & steel chain including wall mounted box M.S. construction made Hundred Seventy Five And Paise

out of 16 gauge MS Sheet with glass door to house the above mentioned componenets. It should be complete as per Eighty Five Only

manufacturer's specifications & as directed by Engineer- in-charge. (to be connected to static water tank) It should be complete

as per manufacturer's specifications & as directed by Engineer- in-charge.

176 93.00 Providing and fixing mechanical foam type(ISI marked) fire extinguishers consisting of welded M.S. cylindrical body squeeze 3512.78 Rupees Three Thousand Five each

lever discharge valve 30 cm long high pressure discharge hose, discharge nozzle suspension bracket ISI marked as per IS 933 Hundred Twelve And Paise Seventy

finished externally with red enamel paint and fixed to wall with brackets complete with internal charger.Capacity 6 kg. Eight Only

177 93.00 Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge 10174.74 Rupees Ten Thousand One each

valve fitted with internal dischargetube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, Hundred Seventy Four And Paise

confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners Seventy Four Only

complete with internal charge.Capacity 4.5 kg. I.S.I. Marked.

178 13710.00 Point wiring for light/bell with 2X1.5 sq. mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS 582.77 Rupees Five Hundred Eighty Two point

PVC insulated multi strand copper wires up to 10 mtr length in below type of pipe erected with 6A Modular type switch/bell And Paise Seventy Seven Only

push & accessories and earth continuity of following type erected on PVC/metallic/wooden Box single mounting base frame,

covered with textured/metalic white front plate modules erected on / in wall / ceiling as per pipe erected with necessary lamp

holder/ ceiling rose/ H.D Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat III

179 3104.00 Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI 200.99 Rupees Two Hundred And Paise point

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth Ninety Nine Only

continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered with

mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.(f)

with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

180 3564.00 Point wiring for Fan with 2X1.5 sq. mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC 809.01 Rupees Eight Hundred Nine And point

insulated multi strand copper wires up to 10 mtr length in below type of pipe erected with 6A Modular type switch and num Paise One Only

free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of

following type erected on PVC/ metallic /wooden Box single mounting base frame, covered with textured/ metalic white front

plate modules erected on / in wall / ceiling as per pipe erected with necessary ceiling rose/ H.D Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.Cat III

181 6286.00 Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame 151.50 Rupees One Hundred Fifty One each

covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by And Paise Fifty Only

Engineer in charge.(1)One No. SP 6 Amp. Cat III

182 6286.00 Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame 151.50 Rupees One Hundred Fifty One each

covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by And Paise Fifty Only

Engineer in charge. (2) One No 5 pin plug -Cat III

183 1326.00 Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame 160.59 Rupees One Hundred Sixty And each

covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Paise Fifty Nine Only

Engineer in charge.(4) TV Co-axial Socket outlet -Cat III

184 5376.00 Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame 180.79 Rupees One Hundred Eighty And each

covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Paise Seventy Nine Only

Engineer in charge.(9) 16 Amp. SP one way switch-Cat III

185 5376.00 Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame 199.98 Rupees One Hundred Ninety Nine each

covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by And Paise Ninety Eight Only

Engineer in charge.(10) 6/16Amp. Universal socket-Cat III

186 2020.00 Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame 170.69 Rupees One Hundred Seventy And each

covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Paise Sixty Nine Only

Engineer in charge.(12) 6Amp. / 16 Amp. Two Way switch-Cat III

187 668.00 Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame 310.07 Rupees Three Hundred Ten And each

covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Paise Seven Only

Engineer in charge..(13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch-Cat III

188 1274.00 Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame 410.06 Rupees Four Hundred Ten And each

covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Paise Six Only

Engineer in charge.(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch-Cat III

189 330.00 Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame 329.26 Rupees Three Hundred Twenty each

covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by Nine And Paise Twenty Six Only

Engineer in charge.(19) Modular Indicating Call Bell-Cat III

190 330.00 Providing following type of Modular type Accessories mounted with PVC/metallic.wooden box, single mounting base frame 149.48 Rupees One Hundred Forty Nine each

covered with textured / metallic / white front plate, modules erected with necessary connections as per site situation directed by And Paise Forty Eight Only

Engineer in charge.(20) Modular Buzzer-Cat III

191 27400.00 Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard copper conductor wire in following 104.03 Rupees One Hundred Four And metre

type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq.mm copper conductor FRLS PVC insulated Paise Three Only

standard wire of green colour for earth continuity of following size.(A) With medium class Rigid PVC pipe and accessories.(b)

2 wire 2.5 sq. mm

192 179270.00 Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard copper conductor wire in following 140.39 Rupees One Hundred Forty And metre

type of pipe to be erected in / on wall / ceiling, with 2.5 sq.mm copper conductor FRLS PVC insulated standard wire of green Paise Thirty Nine Only

colour for earth continuity of following size.(A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

193 490.00 Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard copper conductor wire in following 184.83 Rupees One Hundred Eighty Four metre

type of pipe to be erected in / on wall / ceiling, with 2.5 sq.mm copper conductor FRLS PVC insulated standard wire of green And Paise Eighty Three Only

colour for earth continuity of following size.(A) with medium class Rigid PVC pipe and accessories(b) 2 wire 6 sq. mm

194 25080.00 Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard copper conductor wire in following 326.23 Rupees Three Hundred Twenty Six metre

type of pipe to be erected in / on wall / ceiling, with 2.5 sq.mm copper conductor FRLS PVC insulated standard wire of green And Paise Twenty Three Only

colour for earth continuity of following size.(A) with medium class Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm

195 160.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat 295.93 Rupees Two Hundred Ninety Five Mtr.

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control And Paise Ninety Three Only

panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if

required.(h) One wire 25.00 sq. mm

196 160.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat 376.73 Rupees Three Hundred Seventy Six Mtr.

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control And Paise Seventy Three Only

panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if

required.(i) One wire 35.00 sq. mm

197 240.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat 588.83 Rupees Five Hundred Eighty Eight Mtr.

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control And Paise Eighty Three Only

panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if

required.(j) One wire 50.00 sq. mm

198 240.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat 837.29 Rupees Eight Hundred Thirty Mtr.

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control Seven And Paise Twenty Nine Only

panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if

required.(k) One wire 70.00 sq. mm

199 400.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat 1149.38 Rupees One Thousand One Mtr.

resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control Hundred Forty Nine And Paise

panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if Thirty Eight Only

required.(l) One wire 95.00 sq. mm

200 65700.00 Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare 39.39 Rupees Thirty Nine And Paise RM

copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable Thirty Nine Only

coverage overall sheathed with black PVC insulation.(b) RG-6

201 205.00 Providing & fixing approved make Perforated C type Cable tray, made from sheet steel. The cable tray should be single or 424.20 Rupees Four Hundred Twenty Four RM

double bended as per required and as per IS 2062 / 1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 And Paise Twenty Only

with max 17.5% perforation with coupler plate / fish plate and GI hardware like nut - bolt and washers etc. erection with

necessary support included) as per specification and as per instruction of Engineer In charge.(3) 150 X 50 X 1.6 mm Thick

202 410.00 Providing & fixing approved make Perforated C type Cable tray, made from sheet steel. The cable tray should be single or 622.16 Rupees Six Hundred Twenty Two RM

double bended as per required and as per IS 2062 / 1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 And Paise Sixteen Only

with max 17.5% perforation with coupler plate / fish plate and GI hardware like nut - bolt and washers etc. erection with

necessary support included) as per specification and as per instruction of Engineer In charge.(5) 300 mm X 50 mm X 2.0 mm

203 830.00 Providing & fixing approved make Perforated C type Cable tray, made from sheet steel. The cable tray should be single or 1006.97 Rupees One Thousand Six And RM

double bended as per required and as per IS 2062 / 1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 Paise Ninety Seven Only

with max 17.5% perforation with coupler plate / fish plate and GI hardware like nut - bolt and washers etc. erection with

necessary support included) as per specification and as per instruction of Engineer In charge. (7) 600 X 50 X 2.0 mm Thick

204 440.00 Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition 188.87 Rupees One Hundred Eighty Eight RM

free and flame proof confirming BS with necessary end caps Internal and external bend, flat bends, coupler, tee etc..All And Paise Eighty Seven Only

necessary accessories and measuring of following sizes (3) 50 mm x 50 mm trunking

205 7.00 Fabrication, supply, installation, testing and commissioning of wall/floor maounted cubicle type LT panels suitable for 415 V 3 196773.25 Rupees One Lakh(s) Ninety Six each

phase, 4 wire, 50 Hz AC supply system (IP 42 degree of protection) fabricated in compartmentalized design from CRCA sheet Thousand Seven Hundred Seventy

made out of 2 mm thick for frame work & covers 3mm thick for gland plates including cleaning & finishing complete with 7 Three And Paise Twenty Five Only

tank process for powder coating in approved shade, having TPN Al alloy bus bars of high conductivity, DMC/SMC bus bar

supports with short circuit withstand capacity of 31 MVA for 1 sec, bottom base channel of MS section. Entire panel shall

have a common copper earth bar of size as per CPWD specification at the rear with 2 Nos earth stud, interconnections from

main busbar to switch gears with required size of AL bus bar and control wiring with PVC insulated FRLS copper conductor

single core cable, cable alleys, cable gland plates etc. providing following switch gears:Note: All the MCCBs of capacity more

than 250 Amp should be Microprocessor based and below 250Amp it should be Thermal Magnetic based MDB- E- DG

Supply Panel-Incoming:315 A, FP MCCB 25 KA - 1 No.400 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -

1 Set-Outgoings:63 A FP MCB, - 2 Nos.63 A TPN MCCB, 25 KA - 4 Nos.200 A FP MCCB, 35 KA - 1 Nos.Instruments:

Multi Function Meter (MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set Indication lamp RYB with Fuses/MCB etc. as

206 7.00 Fabrication, supply, installation, testing and commissioning of wall/floor maounted cubicle type LT panels suitable for 415 V 3 117310.49 Rupees One Lakh(s) Seventeen each

phase, 4 wire, 50 Hz AC supply system (IP 42 degree of protection) fabricated in compartmentalized design from CRCA sheet Thousand Three Hundred Ten And

made out of 2 mm thick for frame work & covers 3mm thick for gland plates including cleaning & finishing complete with 7 Paise Forty Nine Only

tank process for powder coating in approved shade, having TPN Al alloy bus bars of high conductivity, DMC/SMC bus bar

supports with short circuit withstand capacity of 31 MVA for 1 sec, bottom base channel of MS section. Entire panel shall

have a common copper earth bar of size as per CPWD specification at the rear with 2 Nos earth stud, interconnections from

main busbar to switch gears with required size of AL bus bar and control wiring with PVC insulated FRLS copper conductor

single core cable, cable alleys, cable gland plates etc. providing following switch gears:Note: All the MCCBs of capacity more

than 250 Amp should be Microprocessor based and below 250Amp it should be Thermal Magnetic based-Lift Panel - 3 Lifts-

Incoming:200 A, FP MCCB 25 KA - 1 No.300 A TPN AL. bus bar with coloured heat shrinkable PVC sleeve -1 Set,

Outgoings:32 A DP MCB, - 3 Nos.63 A, FP MCCB 25 KA - 4 No.Instruments: Multi Function Meter (MFM) with CTs &

Fuses/MCB/Selecter Switch -1 Set Indication lamp RYB with Fuses/MCB etc. as req.

207 2.00 Fabrication, supply, installation, testing and commissioning of wall/floor maounted cubicle type LT panels suitable for 415 V 3 35100.53 Rupees Thirty Five Thousand One each

phase, 4 wire, 50 Hz AC supply system (IP 42 degree of protection) fabricated in compartmentalized design from CRCA sheet Hundred And Paise Fifty Three

made out of 2 mm thick for frame work & covers 3mm thick for gland plates including cleaning & finishing complete with 7 Only

tank process for powder coating in approved shade, having TPN Al alloy bus bars of high conductivity, DMC/SMC bus bar

supports with short circuit withstand capacity of 31 MVA for 1 sec, bottom base channel of MS section. Entire panel shall

have a common copper earth bar of size as per CPWD specification at the rear with 2 Nos earth stud, interconnections from

main busbar to switch gears with required size of AL bus bar and control wiring with PVC insulated FRLS copper conductor

single core cable, cable alleys, cable gland plates etc. providing following switch gears:Note: All the MCCBs of capacity more

than 250 Amp should be Microprocessor based and below 250Amp it should be Thermal Magnetic based-MDB L&P -

Higher Class Residences-Incoming:100 A, FP MCCB 25 KA - 1 No, 200 A TPN AL. bus bar with coloured heat shrinkable

PVC sleeve -1 Set, Outgoings:63 A DP MCB, - 3 Nos.63 A, FP MCCB 25 KA - 3 No.Instruments: Multi Function Meter

(MFM) with CTs & Fuses/MCB/Selecter Switch -1 Set , Indication lamp RYB with Fuses/MCB etc. as req.

208 72.00 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board 14902.55 Rupees Fourteen Thousand Nine Sq.Mtr

necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for Hundred Two And Paise Fifty Five

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats Only

channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus

& earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating.(The rates excludes the cost of switchgears, bus bars, inter connecting mains

& Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size. (B) The standard companies switch gear shall be used

and only manufacturers at CPRI approved factory (i) with 350mm depth

209 13.50 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board 19387.96 Rupees Nineteen Thousand Three Sq.Mtr

necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for Hundred Eighty Seven And Paise

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats Ninety Six Only

channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus

& earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating.(The rates excludes the cost of switchgears, bus bars, inter connecting mains

& Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size. (B) The standard companies switch gear shall be used

and only manufacturers at CPRI approved factory (ii) with 550 mm. Depth

210 14.00 Providing and erecting approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA at 415 6790.23 Rupees Six Thousand Seven each

V, having normal current rating up to 25A to 100A, with fixed thermal & magnetic release suitable to work on AC supply Hundred Ninety And Paise Twenty

50c/s with all internal connections & cpomplete erected in existing 16 G.M.S housing.ICS=100% of ICU only Cat III Three Only

211 16.00 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 17843.67 Rupees Seventeen Thousand Eight each

415 V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 Hz. Hundred Forty Three And Paise

with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU Sixty Seven Only

212 14.00 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and 27751.77 Rupees Twenty Seven Thousand each

above at 415 V having Normal current rating 400A. with variable Thermal & magnetic release suitable to work on Seven Hundred Fifty One And

A.C.supply 50 Hz. With all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. Paise Seventy Seven Only

ICS=100% of ICU only Cat III

213 363.00 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit 3344.11 Rupees Three Thousand Three each

withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick Hundred Forty Four And Paise

action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as Eleven Only

directed.(iii) 63 Amps. FP Cat. III

214 2200.00 Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. 77.77 Rupees Seventy Seven And Paise Kg

angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one Seventy Seven Only

coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering &

finishing complete.

215 225.00 Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness (F) 12mm 2311.89 Rupees Two Thousand Three Sq.Mtr

Hundred Eleven And Paise Eighty

216 44.00 Providing & erecting sheet steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral 1152.41 Rupees One Thousand One each

link, earth bar and DIN rail, confirms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Hundred Fifty Two And Paise Forty

MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single phase incoming and horizontal One Only

single phase outgoing (b) sheet steel double door (IP-43)(iii)8 way

217 356.00 Providing & erecting sheet steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral 3412.79 Rupees Three Thousand Four each

link, earth bar and DIN rail, confirms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Hundred Twelve And Paise Seventy

MCBs.(The DBs should be used of same company of MCB to be used) suitable for Three phase incoming and single phase Nine Only

horizontal type outgoing per phase isolation type (PPI).(b) sheet steel double door (iii)8 way

218 6.00 Providing & erecting sheet steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral 3874.36 Rupees Three Thousand Eight each

link, earth bar and DIN rail, confirms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Hundred Seventy Four And Paise

MCBs.(The DBs should be used of same company of MCB to be used) suitable for Three phase incoming and single phase Thirty Six Only

horizontal type outgoing per phase isolation type (PPI).(b) sheet steel double door (iv)12 way

219 44.00 supplying & erecting sheet steel powder coated cable end termination Box to be mounted on Top or Bottom of MCB 326.23 Rupees Three Hundred Twenty Six each

Distribution Box for housing / Covering Extra wires & cables suitable for following size of MCB Db Box. (C) Single Phase 8 And Paise Twenty Three Only

220 356.00 supplying & erecting sheet steel powder coated cable end termination Box to be mounted on Top or Bottom of MCB 689.83 Rupees Six Hundred Eighty Nine each

Distribution Box for housing / Covering Extra wires & cables suitable for following size of MCB Db Box. (G) Three Phase 8 And Paise Eighty Three Only

221 6.00 supplying & erecting sheet steel powder coated cable end termination Box to be mounted on Top or Bottom of MCB 796.89 Rupees Seven Hundred Ninety Six each

Distribution Box for housing / Covering Extra wires & cables suitable for following size of MCB Db Box. (H) Three Phase 12 And Paise Eighty Nine Only

222 9024.00 Providing & erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C system and having 123.22 Rupees One Hundred Twenty Three each

breaking capacity 10 KA to be erected in existing box confirming to IS 8826/1996 with ISI mark. cat III And Paise Twenty Two Only

223 44.00 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity 329.26 Rupees Three Hundred Twenty each

& confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp. Cat III Nine And Paise Twenty Six Only

224 362.00 Providing & erecting Four pole Miniature Isolator A.C.22 duly confirms to IS 13947-3 in existing box. (b) for 63 amps cat III 655.49 Rupees Six Hundred Fifty Five And each

Paise Forty Nine Only

225 1086.00 Providing & erecting approved make ELCBs / RCCBs confirming to IS : 12640 and having sensitivity of 30 mA and short 2919.91 Rupees Two Thousand Nine each

circuit withsatnd capacity of 10KA and suitable for operation on single phase 240 V, 50 Hz having characterstic of quick Hundred Nineteen And Paise

action & tripping with all advance feature & do not incorporate any electronic component for following Max rating erected as Ninety One Only

directed.63 Amps DP -cat III

226 406.00 Providing & erected metallic vitrified danger notice board as per language suggested by Engineer Incharge for MEDIUM 69.69 Rupees Sixty Nine And Paise Sixty each

VOLTAGE installation to be erected as per IS-2551. Nine Only

227 490.00 Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on 589.84 Rupees Five Hundred Eighty Nine metre

wall with necessary clamps or in existing trench / pipe of following size of cables. (E) 3 1/2 core 95 Sq. mm (50 Sq. mm 1/2 And Paise Eighty Four Only

228 1540.00 Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on 648.42 Rupees Six Hundred Forty Eight metre

wall with necessary clamps or in existing trench / pipe of following size of cables.(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 And Paise Forty Two Only

229 400.00 Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on 2096.76 Rupees Two Thousand Ninety Six metre

wall with necessary clamps or in existing trench / pipe of following size of cables. (K) 3 1/2 core 400 Sq.mm ( 185 Sq. mm And Paise Seventy Six Only

230 500.00 Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on 184.83 Rupees One Hundred Eighty Four metre

wall with necessary clamps or in existing trench / pipe of following size of cables.(A) 4 core 16 Sq. mm And Paise Eighty Three Only

231 490.00 Providing and erecting XLPE (IS:7098) - BB ISI armoured cable multistrand aluminium conductor for 1.1 KV . To be laid on 307.04 Rupees Three Hundred Seven And metre

wall with necessary clamps or in existing trench / pipe of following size of cables.(B) 4 core 35 Sq. mm Paise Four Only

232 46.00 END TERMINATIONS : Providing & fixing heavy duty flange type brass double compression type cable gland with rubber 75.75 Rupees Seventy Five And Paise each

ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables. (B) 3.5 Seventy Five Only

core 35/50 sq. mm

233 14.00 END TERMINATIONS : Providing & fixing heavy duty flange type brass double compression type cable gland with rubber 131.30 Rupees One Hundred Thirty One each

ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables. (D) 3 & And Paise Thirty Only

1/2 core 95 Sq. mm

234 14.00 END TERMINATIONS : Providing & fixing heavy duty flange type brass double compression type cable gland with rubber 140.39 Rupees One Hundred Forty And each

ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables.(E) 3 & Paise Thirty Nine Only

1/2 core 120 Sq. mm

235 16.00 END TERMINATIONS : Providing & fixing heavy duty flange type brass double compression type cable gland with rubber 369.66 Rupees Three Hundred Sixty Nine each

ring for PVC insulated armoured cable complete with outgoing tails insulating tape etc. for following size of cables. (J) 3 & And Paise Sixty Six Only

1/2 core 400 Sq. mm

236 184.00 Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high 20.20 Rupees Twenty And Paise Twenty each

pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(D) 35/50 sq. Only

237 56.00 Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high 40.40 Rupees Forty And Paise Forty Only each

pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(F) 95 Sq.mm.

238 56.00 Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high 45.45 Rupees Forty Five And Paise Forty each

pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(G) 120 Five Only

239 64.00 Solder less crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly climped with high 110.09 Rupees One Hundred Ten And each

pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.(L) 400 Paise Nine Only

240 80.00 Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling 55.55 Rupees Fifty Five And Paise Fifty metre

the same and making the surface as normal ground. Five Only

241 700.00 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or 74.74 Rupees Seventy Four And Paise metre

locating the fault all over the run and back filling the same and making the surface as normal ground. Seventy Four Only

242 90.00 (B) If additional machinery like hammer driller or JCB use [Add] 357.54 Rupees Three Hundred Fifty Seven metre

And Paise Fifty Four Only

243 495.00 Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with 62.62 Rupees Sixty Two And Paise Sixty metre

necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / Two Only

road surface for enclosing cable (A)50 mm outer dia

244 450.00 Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with 95.95 Rupees Ninety Five And Paise metre

necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / Ninety Five Only

road surface for enclosing cable (C))90 mm outer dia

245 385.00 Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with 137.36 Rupees One Hundred Thirty Seven metre

necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / And Paise Thirty Six Only

road surface for enclosing cable (D)120 mm outer dia.

246 9770.00 Supplying and erecting LED Indoor fittings with LEDs of wattage 0.2 watt to 0.5 watt assembled on single MCPCB, with 427.23 Rupees Four Hundred Twenty each

housing used as a heat sink shall be made of thick sheet steel confirming to IS: 513/CRCA/aluminium pressure die cast powder Seven And Paise Twenty Three

coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 120 to Only

300 V, power factor more than 0.9, THD< 10%, CCT 3000 K to 65 K. Luminiare efficacy > 85 lumens/watt. LED efficiency

110 lumens/watt, LED driver efficiency > 85%. CREE/OSRAM/PHILIPS Lumileds/ NICHIA/ SEOUL/ Bridgelux make LED

used for luminiare (fitting required LM-79 & LM-80 certificates )( Note: below description have shown ranges of wattage

capacity of LED fittings. The Engineer Incharge may select any wattage capacity between the ranges shown).(A) Square/

Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20.(b) 11-15

watts, surge-2 KV Cat - III

247 1034.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with 165.64 Rupees One Hundred Sixty Five each

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder And Paise Sixty Four Only

coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than

0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED , LED driver efficiency > 85 % (

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(A) Tube light with integral

driver(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet Cat - III

248 1980.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with 535.30 Rupees Five Hundred Thirty Five each

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder And Paise Thirty Only

coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than

0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED , LED driver efficiency > 85 % (

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(A) Tube light with integral driver

(v) 36-40 Watts, Surge-2 kV, IP-20, conventional 4 feet -Cat - III

249 338.00 Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 188.87 Rupees One Hundred Eighty Eight each

500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5(iii) 10 And Paise Eighty Seven Only

to 15 watts, Cat-III

250 3346.00 Providing and erecting decorative wall bracket fittings complete with LED lamp and rust free fittings components mounted in 1712.96 Rupees One Thousand Seven each

chrome finish housing with holder ,clear/opaque glass diffuser complete erected with lead wires with minimum 15 wattage Hundred Twelve And Paise Ninety

capacity as per instruction engineer incharge/architect/authority .cat-III Six Only

251 272.00 Providing and erecting PVC body surface or pendant mounting LED Bulk type 9 watt Lighting fitting with electronic driver 787.80 Rupees Seven Hundred Eighty each

and lumen output from luminiare 720 lm, input voltage range 90-300 VAC, 50 Hz cool white (3000 to 6500 K), inbuilt driver, Seven And Paise Eighty Only

20 degree C to + 60 deg C working temperature, AL frame with Beam Angle 120 deg.

252 1448.00 Supply, Installation, Testing and Commissioning of 1200 mm (48") sweep, BEE 5 Star rated, Ceiling fan with Brush Less 2885.57 Rupees Two Thousand Eight each

Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. Hundred Eighty Five And Paise

canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum Fifty Seven Only

6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for

Speed Control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge]

253 1000.00 Supply, Installation, Testing and Commissioning of 1400 mm (56") sweep, BEE 5 Star rated, Ceiling fan with Brush Less 3356.23 Rupees Three Thousand Three each

Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. Hundred Fifty Six And Paise

canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum Twenty Three Only

6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for

Speed Control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge]

254 1122.00 Supplying & erecting Single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise 2054.34 Rupees Two Thousand Fifty Four each

operation suitable for medium duty having following dia size and maximum speed in RPM(A) 305 mm dia. 900 RPM, Cat II And Paise Thirty Four Only

255 1122.00 Providing suitable M.S. louver shutter of the Exhaust Fan. 368.65 Rupees Three Hundred Sixty Eight each

And Paise Sixty Five Only

256 20.00 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and 7561.87 Rupees Seven Thousand Five each

shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction Hundred Sixty One And Paise

box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud Eighty Seven Only

type terminal and arrangement for cable termination to be erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long with necessary G.I. J Bolts .Approx Pole weight 46 kg

257 20.00 Providing and erecting Street Light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete 626.20 Rupees Six Hundred Twenty Six each

with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top And Paise Twenty Only

having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr. length with 110 deg.with vertical plane &

suitable welded stays, reducer and with check nuts complete painted with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms. [A] Single Arm Bracket 1.5 Mtr

258 1.00 Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 3168.37 Rupees Three Thousand One each

channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum Hundred Sixty Eight And Paise

switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & Thirty Seven Only

housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as

259 20.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above 4248.06 Rupees Four Thousand Two each

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with Hundred Forty Eight And Paise Six

smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened Only

glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)(A) Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-voltage protection. (ii) 48 - 59 Watts Cat-III

260 7.00 SITC of LED type twin Dome red Aviation obstacle light fixture min. 10 W low intensity type B as per ICAO annex-14, IP 66 11711.96 Rupees Eleven Thousand Seven each

operationg on 230 V AC 50 or 60 Hz input supply direct mounting tyoe complete as required as per specifications. Hundred Eleven And Paise Ninety

261 30.00 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box 898.90 Rupees Eight Hundred Ninety Eight each

complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement having And Paise Ninety Only

locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth

bolt of following size of box.(A) 300mm x 200mm x 100mm [deep]

262 140.00 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kV grade ISI marked copper wires of following size 58.58 Rupees Fifty Eight And Paise Fifty Mtr.

to be erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed Eight Only

263 4.00 Supplying & erecting funnel type earthing having earth plate of following size burried in specifically prepared earth pit 3 mtr, 7874.97 Rupees Seven Thousand Eight each

below ground with 40 kg charcoal and salt with alternate layers of charcoal & salt, 20 mm dia GI pipe with funnel with a wire Hundred Seventy Four And Paise

mesh for watering & bricks masanory block CI cover complete as per para 7.3 of IS 3043 with necessary length of double Ninety Seven Only

Galvanized Iron / copper earth wire no. 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I pipe 2.5 mtr long

complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS

(As per drawing) with following Specification. (C) with 60 x 60x 0.315 cms. Copper earth Plate

264 74.00 Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe 8636.51 Rupees Eight Thousand Six each

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Hundred Thirty Six And Paise Fifty

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with One Only

constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be

submitted by Agency. (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil. Length of Pipe : 3.00 mtrs,

Back filling Compound :2 nos Bags of 25 Kg.

265 2615.00 Providing and erecting required size HOT deep galvanized iron strip for earthing of H.T, OCB/ACB/Transformer LT panel 77.77 Rupees Seventy Seven And Paise Kg

board, motors etc. using proper clamp. Seventy Seven Only

266 245.00 Providing and erecting required size Copper strip for earthing of H.T, OCB/ACB/Transformer LT panel board, motors etc. 794.87 Rupees Seven Hundred Ninety Four Kg

using copper clamp. And Paise Eighty Seven Only

267 288.00 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 794.87 Rupees Seven Hundred Ninety Four Kg

And Paise Eighty Seven Only

268 660.00 Providing and erecting Hot deep Galvanized Iron strip wire 8 to 16 SWG. 77.77 Rupees Seventy Seven And Paise Kg

Seventy Seven Only

269 44.00 SITC of Vertical Air Terminal Solid aluminium with base-10 mm dia and 3000 mm long. Air Termination base tested for 9416.23 Rupees Nine Thousand Four each

conditioning, ageing test & Lightening impulse current withstand test: 100 KA of 10/350 Us waveform in an accerdited third Hundred Sixteen And Paise Twenty

party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34 mm dia 3000 mm long-Cold Galvanized. Three Only

270 1600.00 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt. 299.97 Rupees Two Hundred Ninety Nine metre

accredited thirty party laboratory to meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding And Paise Ninety Seven Only

clamp at every 1 mtr distance, Aluminium/SS cross splicer at every crossing of Alu. conductor, Expansion piece with

connectors at every 20 mtr distance, Aluminium straight Splicer to connect conductors. All Accessories should be tested as

per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of

10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party

laboratory to meet the requirements of IS/IEC

271 1390.00 SITC of 10 mm MS Round solid conductor having smooth surface should be tested and use exclusively for lightening 728.21 Rupees Seven Hundred Twenty metre

protection (vertical Riser / down conductor which shall be concealed in column) to meet the requirement of IS IEC 62305 with Eight And Paise Twenty One Only

accessories. Earthing stud of dimensions SS-75 mm OD plate with 10 mm dia tail connector used in structural steel ring

earthing system to meet the requirement of IS / IEC 62305. (For interconnecting the column and Terrace AL Conductor / strip/

flat SS cross connector to connect Earth fixing oint to vertical raiser / down conductor. SS straight splicer at every 4 mtr to

connect MS conductor in column. Bonding / Rehar clamp at every 3 mtr suitable for innerconnecting round conductor with

reinforcement inside the concrete for structural earthing system, SS connector - To connect external conductor 8-10 mm with

earth fixing point. All accessories shall be test as per IEC 62561 I 2018 CI.6.3 for conditioning & ageing test & 6.4 for

lightening impulse current withstand test:100 KA of 10/350 Us waveform (Ageing & Electrical test) conducted in a sequence

manner & tested in the Govt. accerdited Third party laboratory to meet the requirements of IS/IEC6230.

272 950.00 SITC of Galvanized steel flat 25X6 mm thickness from earth electrode directly in ground as required. Zinc coating 500 g/m 154.53 Rupees One Hundred Fifty Four metre

square (approx 70 micron coating) tested used exclusively for lightening protection earthing system and ring equipment And Paise Fifty Three Only

273 32.00 SITC of 14.2 mm dia 3 mtr long earth electrode of high tensile steel electrode with 250 micron copper bonding & 1 bag of 5992.33 Rupees Five Thousand Nine Per Set

carbon fill based environment friendly backfill tested as per IEC 62561-7 in NABL accerdited Laboratory and suitable Hundred Ninety Two And Paise

stainless steel double sided clamp. Eco friendly rust proof heavy duty weather proof polythylene earth pit chamber with Thirty Three Only

following dimensions: 254 mm dia (top) 330 mm dia (bottom) & 260 mm (height).

274 44.00 SITC of stainless steel cross connector for 8 mm dia aluminium alloy round conductor & 10 mm copper bonded conductor at 1073.63 Rupees One Thousand Seventy each

cross junction, test parameter salt spray test (IEC 62561-1)-No sign of corrosion complete as required. Three And Paise Sixty Three Only

275 21100.00 Providing & erecting ISI mark Medium class RIGID PVC Pipes of following size complete to be erected on / in wall or ceiling 24.24 Rupees Twenty Four And Paise metre

erected with necessary PVC fittings & junction boxes fixed with adhesive solution & clamps with following dia of pipes, in Twenty Four Only

approved manner as directed.(a) 20 mm

276 116300.00 Providing & erecting ISI mark Medium class RIGID PVC Pipes of following size complete to be erected on / in wall or ceiling 33.33 Rupees Thirty Three And Paise metre

erected with necessary PVC fittings & junction boxes fixed with adhesive solution & clamps with following dia of pipes, in Thirty Three Only

approved manner as directed.(b) 25 mm

277 65000.00 Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on 63.63 Rupees Sixty Three And Paise metre

surface, U/FTP, LSZH, Non- Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting Sixty Three Only

upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy

indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH

standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer

Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required.-1

Run of cable-Note: Wiring/Fiber installation shall include numbering, Ferruling, termination and testing of cables at both ends.

Fiber Splicing, Testing with OTDR etc. shall be the part of installation of the fibers.Test Reports of Passive Items with dully

authorized by OEM shall be submitted for 25 years warranttee.All Active devices shall have minimum 5 years of support from

the date of handover.

278 31100.00 Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on 106.05 Rupees One Hundred Six And metre

surface, U/FTP, LSZH, Non- Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting Paise Five Only

upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy

indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH

standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer

Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required.-2

Run of cable-Note: Wiring/Fiber installation shall include numbering, Ferruling, termination and testing of cables at both ends.

Fiber Splicing, Testing with OTDR etc. shall be the part of installation of the fibers.Test Reports of Passive Items with dully

authorized by OEM shall be submitted for 25 years warranttee.All Active devices shall have minimum 5 years of support from

the date of handover.

279 2509.00 Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO) with face plate of color as per 258.56 Rupees Two Hundred Fifty Eight each

site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper And Paise Fifty Six Only

Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required.-

Note: Wiring/Fiber installation shall include numbering, Ferruling, termination and testing of cables at both ends. Fiber

Splicing, Testing with OTDR etc. shall be the part of installation of the fibers.Test Reports of Passive Items with dully

authorized by OEM shall be submitted for 25 years warranttee.All Active devices shall have minimum 5 years of support from

the date of handover.

280 30.00 Supplying and fixing of 15U size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked- 11409.97 Rupees Eleven Thousand Four each

down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top Hundred Nine And Paise Ninety

and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- Seven Only

7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware

mounting screws packet of 20 x 1 number, etc. complete as required.-Note: Wiring/Fiber installation shall include numbering,

Ferruling, termination and testing of cables at both ends. Fiber Splicing, Testing with OTDR etc. shall be the part of

installation of the fibers.Test Reports of Passive Items with dully authorized by OEM shall be submitted for 25 years

warranttee.All Active devices shall have minimum 5 years of support from the date of handover.

281 7.00 Supplying and fixing 42U Rack with 6 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 28206.27 Rupees Twenty Eight Thousand each

1.6mm CRCA Sheet with removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking Two Hundred Six And Paise

completely knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 8nos two line cable entry /exit Twenty Seven Only

provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with MS frame or MS perforated with

lock, Rear MS vented or perforated door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x

sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number,

etc. complete as required.-Note: Wiring/Fiber installation shall include numbering, Ferruling, termination and testing of cables

at both ends. Fiber Splicing, Testing with OTDR etc. shall be the part of installation of the fibers.Test Reports of Passive Items

with dully authorized by OEM shall be submitted for 25 years warranttee.All Active devices shall have minimum 5 years of

support from the date of handover.

282 2509.00 Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification 148.47 Rupees One Hundred Forty Eight each

program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.-Copper Patch Cords of length 1m (3ft)- And Paise Forty Seven Only

Note: Wiring/Fiber installation shall include numbering, Ferruling, termination and testing of cables at both ends. Fiber

Splicing, Testing with OTDR etc. shall be the part of installation of the fibers.Test Reports of Passive Items with dully

authorized by OEM shall be submitted for 25 years warranttee.All Active devices shall have minimum 5 years of support from

the date of handover.

283 2509.00 Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification 346.43 Rupees Three Hundred Forty Six each

program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.-Copper Patch Cords of length 3m And Paise Forty Three Only

(10ft)-Note: Wiring/Fiber installation shall include numbering, Ferruling, termination and testing of cables at both ends. Fiber

Splicing, Testing with OTDR etc. shall be the part of installation of the fibers.Test Reports of Passive Items with dully

authorized by OEM shall be submitted for 25 years warranttee.All Active devices shall have minimum 5 years of support from

the date of handover.

284 119.00 Supply, Installation, Testing & Commissioning of Staggred 24 Port Unshielded, Loaded with Category 6A RJ45 Unshielded 20430.28 Rupees Twenty Thousand Four each

Modular Jack, Keystone information outlet (I/O) in accordance with ANSI/TIA 568.2-D, IEC 60603-7-4 2nd Edition, Hundred Thirty And Paise Twenty

ISO/IEC 11801, ROHS Compliant. The I/O should have minimum 750 mating cycle and 200 insertion cycle and ETL 04- Eight Only

Connector Channel Verified, 1U height, Black with integrated cable support bar, clear label marks and earthing plug for UTP

cable termination at rack end complete etc as required.-Note: Wiring/Fiber installation shall include numbering, Ferruling,

termination and testing of cables at both ends. Fiber Splicing, Testing with OTDR etc. shall be the part of installation of the

fibers.Test Reports of Passive Items with dully authorized by OEM shall be submitted for 25 years warranttee.All Active

devices shall have minimum 5 years of support from the date of handover.

285 2700.00 SITC of O. F. Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath [Approved by Competent Authority i.e. not Below 50.50 Rupees Fifty And Paise Fifty Only Mtrs.

the rank of Executive Engineer ]-Note: Wiring/Fiber installation shall include numbering, Ferruling, termination and testing of

cables at both ends. Fiber Splicing, Testing with OTDR etc. shall be the part of installation of the fibers.Test Reports of

Passive Items with dully authorized by OEM shall be submitted for 25 years warranttee.All Active devices shall have minimum

5 years of support from the date of handover.

286 60.00 SITC of LIU 12 PORT Rack Mount - Loaded (LC) SM 6901.33 Rupees Six Thousand Nine each

[Approved by Competent Authority i.e. Hundred One And Paise Thirty

not Below the rank of Executive Engineer ]-Note: Wiring/Fiber installation shall include numbering, Ferruling, termination and Three Only

testing of cables at both ends. Fiber Splicing, Testing with OTDR etc. shall be the part of installation of the fibers.Test Reports

of Passive Items with dully authorized by OEM shall be submitted for 25 years warranttee.All Active devices shall have

minimum 5 years of support from the date of handover.

287 720.00 SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m 779.72 Rupees Seven Hundred Seventy each

[Approved by Competent Authority i.e. not Nine And Paise Seventy Two Only

Below the rank of Executive Engineer ]-Note: Wiring/Fiber installation shall include numbering, Ferruling, termination and

testing of cables at both ends. Fiber Splicing, Testing with OTDR etc. shall be the part of installation of the fibers.Test Reports

of Passive Items with dully authorized by OEM shall be submitted for 25 years warranttee.All Active devices shall have

minimum 5 years of support from the date of handover.

288 236.00 SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m 1901.83 Rupees One Thousand Nine each

[Approved by Competent Hundred One And Paise Eighty

Authority i.e. not Below the rank of Executive Engineer ]-Note: Wiring/Fiber installation shall include numbering, Ferruling, Three Only

termination and testing of cables at both ends. Fiber Splicing, Testing with OTDR etc. shall be the part of installation of the

fibers.Test Reports of Passive Items with dully authorized by OEM shall be submitted for 25 years warranttee.All Active

devices shall have minimum 5 years of support from the date of handover.

289 14.00 SITC of 20 x SFP ports 647939.24 Rupees Six Lakh(s) Forty Seven each

4 x Combo 10/100/1000BASE-T/SFP ports Thousand Nine Hundred Thirty

4 x 10G SFP+ ports Nine And Paise Twenty Four Only

6 kV surge protection on all RJ-45 access ports

Switch Resource Management (SRM) for flexible management of system resources

Redundant Power Supply (RPS) support

MPLS L2VPM/L3 VPN support

Full L3 routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6

SDN-enabled switch, compatible with Openflow

10-GbE SFP+ to SFP+ 1M Direct Attach Cable [Approved by Competent Authority i.e. not Below the rank of Executive

Engineer ]-Note: All Active devices shall have minimum 5 years of support from the date of handover.

290 119.00 SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security 31996.80 Rupees Thirty One Thousand Nine each

features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface 193 W PoE budget Hundred Ninety Six And Paise

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]Note: All

Active devices shall have minimum 5 years of support from the date of handover.

291 476.00 SITC of Maximum distance of up to 10 km Hot-pluggable Single-mode fiber 1000BASE-LX (IEEE 802.3z standard) Duplex 4801.54 Rupees Four Thousand Eight each

LC connector MSA, RoHS-compliant [Approved by Competent Authority i.e. not Below the rank of Executive Engineer Hundred One And Paise Fifty Four

]Note: All Active devices shall have minimum 5 years of support from the date of handover. Only

292 13.00 SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto 174606.78 Rupees One Lakh(s) Seventy Four each

attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program Thousand Six Hundred Six And

me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialing Paise Seventy Eight Only

facility, QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two

external number, Once only ring device, Chairman / Secretary - Do not disturb Facility, Power Down Mode, Hot Line, Hot

Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with

Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port,

Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global

Directory Printing with following capacities [[Approved by Competent Authority i.e. not Below the rank of Executive

Engineer ] [E] No of Extension 128, No of Junctions 24, No of expandable ports : 512, Operators Console - 01 Compatible :

ISDN and Networking

293 996.00 Providing and erecting IP Phone with display with all IP system supported [[Approved by Competent Authority i.e. not Below 5649.94 Rupees Five Thousand Six Hundred each

the rank of Executive Engineer ] Forty Nine And Paise Ninety Four

294 Supplying Installation Testing and Commissioning of 5MP/6 MP IP IR Bullet Camera having following specifications, type of

lens and features etc :-

1) Type of Camera: Bullet Camera

2) Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition

3) Signal System: PAL/NTSC

4) Minimum Illumination: 0.006Lux@ F1.4, AGC ON, 0 lux with IR or better

5) Imaging: 1/3s to 1/30000s, Auto Gain Control, White Balance- Auto, Back Light Compensation, Multi zone Privacy

Masking, HLC, Digital Watermarking. 6) On Screen Display: Camera should display Camera title, Date & Time in live &

recorded video both.

7) Signal to Noise Ratio: > 50 dB

8) Lens Type & Focus: as given below.

9) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR Source- Inbuilt IR LED's

with effective distance upto 50 Mtrs integrated IR and 30 Mtrs for colour view in night.

10) Video Compression (Minimum): H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723

11) Wide Dynamic Range: WDR (120dB or more)

12) Digital Noise Reduction: DNR (2D/3D) On/Off

13) Streaming: Triple streaming, configurable

14) Video Streaming & Frame Rates: Triple streaming , configurable Main stream: 5MP/6MP @25/30 fps, Sub streams:

D1@25/30 fps or better

15) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser

16) Profile Management: User configuration import, export

17) Security: User Authentication, Digital Water Marking

18) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied

with minimum 128GB memory Card.

19) Recording Management: Format SD, overwrite, storage management, video to NAS device,

199.00 20) Edge Analytics: Tripwire, Intrusion, Motion Detection 23103.75 Rupees Twenty Three Thousand each

21) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state One Hundred Three And Paise

detection; memory space detection Seventy Five Only

22) Alarm Support: It should have 1/1 Alarm In/ Out Port

23) Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/ Out Port for external Mic. and Speaker (As per site

requirement) with G.711U/A / G.711Mu/ AAC/ G.726 audio compreesion

24) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP,

ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

25) System Capability: ONVIF

26) VMS: Camera shall support open source VMS

27) Cyber Security: trusted boot, AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs,

account lockout,

video encryption, IP/MAC filtering, HTTPS, trusted upgrade.

28) Ethernet: 1 RJ 45 10/100 Ethernet port

29) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE—to

ensure continuous operation in the event of a failure in one power source.

30) Power Requirement: 12VDC/24V DC/PoE (802.3af)/ePoE

31) Enclosure: IP67 weather proof, IK10

32) Operating Condition: Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing)

33) IR life: 40000 hours or higher

34) Video Bit rate: 32 KBPS - 8 MBPS or better

35) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS - 5MP/6MP IP IR 2.7 to 4 mm ~12 to 13.5mm or better

Varifocal Motorized lens outdoor Bullet Camera

295 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera

licenses to record for all channels having specifications and features etc as mentioned below :

1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses to record per NVR and to provide a

live view, storage and simultaneously Multi-channel playback of all IP camera or more and must be ONVIF with minimum

support of 384 Mbps incoming Bandwidth.

2) NVR should support video compressions : H.265 or better, H.264, MJPEG.

3) Must support 1 channel RCA Input, 2 channel RCA Output for Two-way Talk with G.711U/A, G.711u, PCM, G726 audio

4) Intelligent auto power on when power resumes after power outage.

5) Storage: It should support minimum 8 SATA Slots with 20TB capacity/ Slot and RAID support of RAID 0/1/5/6/10.

6) Connectivity Interface : 2 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232, 1x eSATA Port

7) Backup Interface : Its should have 4 Nosx USB port (2x USB3.0, 2xUSB2.0)

8) Video Output Ports: 2x HDMI and 2 VGA

9) Alarm Ports: It should have 16/8 Ch In/ Out ports to connect various type of external sensors and output devices like

hooter/ Siren etc.

10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure,

HDD failure, vandalism, tempring, network disconnection and panic

11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing.

12) Protocols: HTTP, HTTPS, TCP/IP, IPv4/IPv6, UDP, DHCP, DNS, SMTP, UPnP, IP Filter, PPPoE, FTP, DDNS, Alarm

Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for

remote monitoring without any public IP need.

13) Standards: CE, FCC, RoHS, BIS Certified

14) Power Supply : Should support AC100-240V, 50/60Hz Power supply.

15) Operating Condition : -5°C to 50°C, humidity 90% (max) (non-condensing)

16) The VMS application shall support all the features & functionalities of the offered cameras.

17) VMS should consist Licenses for all channels to record Cameras with General, motion detection, intelligent, alarm and

POS recording modes. VMS should be provided with Camera Licenses, with no dependency of VMS licenses by binding with

the MAC address of the cameras to achieve the functionality.

18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android and iOS devices,

enabling remote monitoring and playback of cameras/NVR footage.

19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for remote

monitoring over the Internet.

20) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode

21) It should support Resolution: 32MP; 24MP; 16MP; 12MP; 8MP; 5MP; 4MP; 1080p; 720p; D1; CIF; QCIF

22) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert

details. The snapshot function is supported on monitoring and playback page

23) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm

event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be configured to receive any

combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message

includes the NVR name, time of alarm and a list of camera that is configured to record upon alarm

24) It should have Web and GUI interface.

25) Built-In Artificial Intelligence: NVR should have built-in AI :-

- 2 Channel face detection and recognition, - Minimum

4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection

7.00 26) Face Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of Minimum 20,000 Faces or 55451.02 Rupees Fifty Five Thousand Four each

more with Face Detection speed of 12 face images/sec and facility to add Name, gender, birthday, address, credential type, Hundred Fifty One And Paise Two

credential No., countries & regions and state to each face image. Only

27) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses, expressions, face mask, beard,

Top color, top type,

hat, bag, age, gender and umbrella.

28) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body, vehicle model, vehicle

logo, calling, seatbelt, vehicle registration location etc vehicle attributes.

29) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external

alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis,

crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan, cybersecurity exception.

30) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and

31) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People

Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection.

32) Smart playback function: Should support smart search for the selected area in the video and smart playback to improve the

playback efficiency

33) VCA (Video Content Analytic): Should support multiple video contented analytics based on camera analytics

34) Analytics by NVR: Perimeter protection and face recognation

32 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16/25/32(36), 2nd screen: 1/4/8/9/16

296 7.00 Supply, Installation, Testing and commissioning of Monitor, 55" LED high resolution monitor with high performance 79572.85 Rupees Seventy Nine Thousand each

240VAC, 50 Hz. 24x7 for spot display including all accessories as per specifications and as required to complete the system. Five Hundred Seventy Two And

Paise Eighty Five Only

297 7.00 Supply, installation, testing & commissioning of Client Workstation as per following specifications:Intel Core i7-8700K or 196836.88 Rupees One Lakh(s) Ninety Six each

better, 4.2GHz, OS - Genuine Microsoft Microsoft® Windows 10 Enterprise/IOT 64 Bit, RAM - 16GB, OS - 480 GB Thousand Eight Hundred Thirty Six

SSD/SATA, Graphic Card - In-built Processor Graphics (GPU):Intel® HD Graphics 630 or Intel Q470 Processor, supporting And Paise Eighty Eight Only

2 Monitors, 01 LAN 01GBPS, Audio IN & Out, USB3.0, Keyboard and Mouse, associated cables etc complete.

Approved Makes : Pelco / Avigilon / Axis / Allgovision / Dell / HP

298 41.00 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s 21225.15 Rupees Twenty One Thousand Two each

Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, Hundred Twenty Five And Paise

CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications. 10TB (Terabytes) Fifteen Only

299 7.00 Supply, Installation Testing & Commissioning 15 Mtr. HDMI Interface Cable as per the detailed Specifications supports 1777.60 Rupees One Thousand Seven each

transmission of 4K Signals as per the detailed Specifications Hundred Seventy Seven And Paise

300 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:The Rates of the

following items are for the lift without Machine room (MRL type) (A) GENERAL DESCRIPTION OF LIFTS. [1]

GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector

control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full

collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and

phase reversal relay and safety controls.[3] Car with M S platform with bracings of adequate size and to sustain the impact

load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car

ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with

choice of colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety

device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift

act.[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening made of

hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside [5] Appropriate

battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside the car and at all floors.[7] Full height infra red curtain with

multiple cross / crossing light beams shall be provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking Facility).[9] Audio visual indication in the lift car

showing over loading shall be provided such that doors kept open till excess load is removed.[10] Spring buffers/PU Buffers

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.[12] Voice annunciator with suitable music

shall be provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control

panel. [14] Mechanical over speed governor with governor calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor doors, fireman switch shall be provided.[15] Lift machine

hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with

the other steel structure works, foundations for the machine etc…[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by engineer in charge.[17] Permanent wiring with necessary safety devices

like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator in circuit for lift machine room and lift

well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only

phase Power Supply shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules

shall be arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

1.00 [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission 3132326.13 Rupees Thirty One Lakh(s) Thirty each

from lift inspector and other authorities.[20] acrylic transparent licence/display A4 size holder in lift car[20A] As per statutory Two Thousand Three Hundred

requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk Twenty Six And Paise Thirteen

communication system.3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift Only

erection and provide report by third party authorized by concern licensing authority 5.agency has to provide third party

insurance upto completion of free maintenance period and submit the document for the same.[21] Car Panel Operating

Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view from inside cabin. [22] For

Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided at appropriate

height on the Rear & Side Wall Panels in Lift Car.[23] With Necessary kVA rating voltage controlled Stabilizer suitable for

your controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector)-20 passengers . Ground plus 10 upper floors with Rated Speed of 2.0 /2.5 m/sec with

micro price/PLC control and ACVVVF. drive (B) With General PLUS ADDITIONAL SPECIAL FEATURES attached

herewith. Prem. Cat.

301 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:The Rates of the

following items are for the lift without Machine room (MRL type) (A) GENERAL DESCRIPTION OF LIFTS. [1]

GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector

control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full

collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and

phase reversal relay and safety controls.[3] Car with M S platform with bracings of adequate size and to sustain the impact

load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car

ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with

choice of colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety

device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift

act.[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening made of

hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside [5] Appropriate

battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside the car and at all floors.[7] Full height infra red curtain with

multiple cross / crossing light beams shall be provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking Facility).[9] Audio visual indication in the lift car

showing over loading shall be provided such that doors kept open till excess load is removed.[10] Spring buffers/PU Buffers

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.[12] Voice annunciator with suitable music

shall be provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control

panel. [14] Mechanical over speed governor with governor calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor doors, fireman switch shall be provided.[15] Lift machine

hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with

the other steel structure works, foundations for the machine etc…[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by engineer in charge.[17] Permanent wiring with necessary safety devices

like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator in circuit for lift machine room and lift

well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only

phase Power Supply shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules

shall be arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

6.00 [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission 3398847.96 Rupees Thirty Three Lakh(s) each

from lift inspector and other authorities.[20] acrylic transparent licence/display A4 size holder in lift car[20A] As per statutory Ninety Eight Thousand Eight

requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk Hundred Forty Seven And Paise

communication system.3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift Ninety Six Only

erection and provide report by third party authorized by concern licensing authority 5.agency has to provide third party

insurance upto completion of free maintenance period and submit the document for the same.[21] Car Panel Operating

Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view from inside cabin. [22] For

Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided at appropriate

height on the Rear & Side Wall Panels in Lift Car.[23] With Necessary kVA rating voltage controlled Stabilizer suitable for

your controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector)-20 passengers . Ground plus 12 upper floors with Rated Speed of 2.0 / 2.5 m/sec with

micro price/PLC control and ACVVVF. drive (B) With General PLUS ADDITIONAL SPECIAL FEATURES attached

herewith. Prem. Cat.

302 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:The Rates of the

following items are for the lift without Machine room (MRL type) (A) GENERAL DESCRIPTION OF LIFTS. [1]

GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector

control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full

collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and

phase reversal relay and safety controls.[3] Car with M S platform with bracings of adequate size and to sustain the impact

load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car

ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with

choice of colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety

device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift

act.[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening made of

hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside [5] Appropriate

battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside the car and at all floors.[7] Full height infra red curtain with

multiple cross / crossing light beams shall be provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking Facility).[9] Audio visual indication in the lift car

showing over loading shall be provided such that doors kept open till excess load is removed.[10] Spring buffers/PU Buffers

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.[12] Voice annunciator with suitable music

shall be provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control

panel. [14] Mechanical over speed governor with governor calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor doors, fireman switch shall be provided.[15] Lift machine

hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with

the other steel structure works, foundations for the machine etc…[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by engineer in charge.[17] Permanent wiring with necessary safety devices

like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator in circuit for lift machine room and lift

well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only

phase Power Supply shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules

shall be arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

1.00 [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission 3100814.13 Rupees Thirty One Lakh(s) Eight each

from lift inspector and other authorities.[20] acrylic transparent licence/display A4 size holder in lift car[20A] As per statutory Hundred Fourteen And Paise

requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk Thirteen Only

communication system.3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift

erection and provide report by third party authorized by concern licensing authority 5.agency has to provide third party

insurance upto completion of free maintenance period and submit the document for the same.[21] Car Panel Operating

Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view from inside cabin. [22] For

Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided at appropriate

height on the Rear & Side Wall Panels in Lift Car.[23] With Necessary kVA rating voltage controlled Stabilizer suitable for

your controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector)-16 Passengers, Ground plus 10 upper floors with Rated Speed of 2.0 / 2.5 m/sec., (B)

With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

303 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:The Rates of the

following items are for the lift without Machine room (MRL type) (A) GENERAL DESCRIPTION OF LIFTS. [1]

GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector

control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full

collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and

phase reversal relay and safety controls.[3] Car with M S platform with bracings of adequate size and to sustain the impact

load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car

ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with

choice of colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety

device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift

act.[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening made of

hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside [5] Appropriate

battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside the car and at all floors.[7] Full height infra red curtain with

multiple cross / crossing light beams shall be provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking Facility).[9] Audio visual indication in the lift car

showing over loading shall be provided such that doors kept open till excess load is removed.[10] Spring buffers/PU Buffers

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.[12] Voice annunciator with suitable music

shall be provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control

panel. [14] Mechanical over speed governor with governor calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor doors, fireman switch shall be provided.[15] Lift machine

hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with

the other steel structure works, foundations for the machine etc…[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by engineer in charge.[17] Permanent wiring with necessary safety devices

like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator in circuit for lift machine room and lift

well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only

phase Power Supply shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules

shall be arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

6.00 [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission 3367335.96 Rupees Thirty Three Lakh(s) Sixty each

from lift inspector and other authorities.[20] acrylic transparent licence/display A4 size holder in lift car[20A] As per statutory Seven Thousand Three Hundred

requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk Thirty Five And Paise Ninety Six

communication system.3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift Only

erection and provide report by third party authorized by concern licensing authority 5.agency has to provide third party

insurance upto completion of free maintenance period and submit the document for the same.[21] Car Panel Operating

Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view from inside cabin. [22] For

Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided at appropriate

height on the Rear & Side Wall Panels in Lift Car.[23] With Necessary kVA rating voltage controlled Stabilizer suitable for

your controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector)-16 Passengers, Ground plus 12 upper floors with Rated Speed of 2.0 / 2.5 m/sec., (B)

With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

304 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:The Rates of the

following items are for the lift without Machine room (MRL type) (A) GENERAL DESCRIPTION OF LIFTS. [1]

GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector

control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full

collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and

phase reversal relay and safety controls.[3] Car with M S platform with bracings of adequate size and to sustain the impact

load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car

ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with

choice of colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety

device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift

act.[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening made of

hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside [5] Appropriate

battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside the car and at all floors.[7] Full height infra red curtain with

multiple cross / crossing light beams shall be provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking Facility).[9] Audio visual indication in the lift car

showing over loading shall be provided such that doors kept open till excess load is removed.[10] Spring buffers/PU Buffers

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.[12] Voice annunciator with suitable music

shall be provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control

panel. [14] Mechanical over speed governor with governor calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor doors, fireman switch shall be provided.[15] Lift machine

hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with

the other steel structure works, foundations for the machine etc…[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by engineer in charge.[17] Permanent wiring with necessary safety devices

like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator in circuit for lift machine room and lift

well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only

phase Power Supply shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules

shall be arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

1.00 [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission 2413845.46 Rupees Twenty Four Lakh(s) each

from lift inspector and other authorities.[20] acrylic transparent licence/display A4 size holder in lift car[20A] As per statutory Thirteen Thousand Eight Hundred

requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk Forty Five And Paise Forty Six Only

communication system.3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift

erection and provide report by third party authorized by concern licensing authority 5.agency has to provide third party

insurance upto completion of free maintenance period and submit the document for the same.[21] Car Panel Operating

Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view from inside cabin. [22] For

Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided at appropriate

height on the Rear & Side Wall Panels in Lift Car.[23] With Necessary kVA rating voltage controlled Stabilizer suitable for

your controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector)-10 Passengers, Ground plus 10 upper floors with Rated Speed of 2.0 / 2.5 m/sec., (Fire

Lift) (B) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

305 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:The Rates of the

following items are for the lift without Machine room (MRL type) (A) GENERAL DESCRIPTION OF LIFTS. [1]

GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector

control drive with encoder feedback closed loop system shall be used for lift car and door operation which shall be full

collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and

phase reversal relay and safety controls.[3] Car with M S platform with bracings of adequate size and to sustain the impact

load cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car

ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be of anti skid PVC with

choice of colour of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety

device, facility of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift

act.[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening made of

hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside [5] Appropriate

battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside the car and at all floors.[7] Full height infra red curtain with

multiple cross / crossing light beams shall be provided.[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking Facility).[9] Audio visual indication in the lift car

showing over loading shall be provided such that doors kept open till excess load is removed.[10] Spring buffers/PU Buffers

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.[12] Voice annunciator with suitable music

shall be provided in lift car. [13] Self diagnostics system for operational and safety parameters shall be provided in control

panel. [14] Mechanical over speed governor with governor calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor doors, fireman switch shall be provided.[15] Lift machine

hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with

the other steel structure works, foundations for the machine etc…[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by engineer in charge.[17] Permanent wiring with necessary safety devices

like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator in circuit for lift machine room and lift

well with proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only

phase Power Supply shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules

shall be arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

6.00 [19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission 2616329.25 Rupees Twenty Six Lakh(s) Sixteen each

from lift inspector and other authorities.[20] acrylic transparent licence/display A4 size holder in lift car[20A] As per statutory Thousand Three Hundred Twenty

requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk Nine And Paise Twenty Five Only

communication system.3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift

erection and provide report by third party authorized by concern licensing authority 5.agency has to provide third party

insurance upto completion of free maintenance period and submit the document for the same.[21] Car Panel Operating

Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view from inside cabin. [22] For

Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided at appropriate

height on the Rear & Side Wall Panels in Lift Car.[23] With Necessary kVA rating voltage controlled Stabilizer suitable for

your controller, drive and all equipments of lift. [24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of

work which rating is sugested by CEICED Department (electrical Inspector)-10 Passengers, Ground plus 12 upper floors

with Rated Speed of 2.0 / 2.5 m/sec., (Fire Lift) (B) With General PLUS ADDITIONAL SPECIAL FEATURES attached

herewith. Prem. Cat.

306 178.00 Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. 5148.98 Rupees Five Thousand One each

Hundred Forty Eight And Paise

Ninety Eight Only

307 178.00 Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. 1445.31 Rupees One Thousand Four each

Hundred Forty Five And Paise

Thirty One Only

308 178.00 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. 3151.20 Rupees Three Thousand One each

Hundred Fifty One And Paise

309 178.00 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 3477.43 Rupees Three Thousand Four each

Hundred Seventy Seven And Paise

Forty Three Only

310 7.00 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, 214342.20 Rupees Two Lakh(s) Fourteen each

central processing unit with the following loop modules and capable of supporting not less than 240 devices (including Thousand Three Hundred Forty

detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 Two And Paise Twenty Only

character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile

memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with

automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with

analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete

with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete

as per specifications.Two Loop Panel

311 2450.00 Providing & erecting 16 gauge HGS Steel conduit pipe (as per IS) painted black surface/concealed of following size 108.07 Rupees One Hundred Eight And metre

complete to be erected on/in wall or ceiling with erected with necessary saddles, screws, bends, junction boxes etc. with Paise Seven Only

following (Nominal Bore) dia of pipes, in approved manner as directed -25 mm

312 2450.00 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing 65.65 Rupees Sixty Five And Paise Sixty metre

surface/ recessed steel/ PVC conduit as required. -2 x 1.5 sq. mm Five Only

313 4.00 Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible 11314.02 Rupees Eleven Thousand Three each

motor having [A] For 1.5 HP 3 phase open well horizontal mono block pump set suitable for 190 LPM @ 20 mtr head suitable Hundred Fourteen And Paise Two

for 40 mm dia delivery pipe Cat.II Only

314 2.00 Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible 28586.03 Rupees Twenty Eight Thousand each

motor having [E] For 7.5 HP 3 phase open well horizontal mono block pump set suitable for 1550 LPM to 370 LPM @ 13.5 Five Hundred Eighty Six And Paise

Mtr to 42 Mtr head suitable for 65/75 mm dia delivery pipe Cat.II Three Only

315 12.00 Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible 31312.02 Rupees Thirty One Thousand Three each

motor having [F] For 10 HP 3 phase open well horizontal mono block pump set suitable for 1725 LPM to 940 LPM @ 15 to Hundred Twelve And Paise Two

36 MTR head suitable for 65/80 mm dia delivery pipe Cat.II Only

316 4.00 Supplying & erecting approved make motor control cubical panel (Direct - on - line) made from 16 G. CRCA sheet duly 7722.46 Rupees Seven Thousand Seven each

epoxy powder painted inside and outside with hinged doors and locking, arrangement consisting of suitable size of ON- OFF Hundred Twenty Two And Paise

isolator (AC - 3/23duty) main fuses, single phasing preventer, indicating lamps for R- Y - B phases, overload relay, Automatic Forty Six Only

water level controller, Ammeter, Voltmeter each with two way selector switch incoming, wires duly socket crimped, main

contactor & overload relay, start - stop push buttons, to be erected on angle iron frame grouted on wall as directed. The

isolator, overload relay & contactors will be of L & T, Siemens or BCH make only (A) DOL up to 5.0 H.P.

317 2.00 Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy 13182.52 Rupees Thirteen Thousand One each

powder painted inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) Hundred Eighty Two And Paise

main fuses. Digital volt and current meter (in a single unit) with micro controller based control unit and current sensing single Fifty Two Only

phasing preventer electronic overload protection, over voltage (Programmable) protection and under voltage (Programmable)

protection, prod less dry run protection programming facility for setting of all parameter like overload current, high voltage

limit, low voltage limit, dry run limit with digital indication on seven segment LED display for any fault like over load, high

voltage, low voltage, dry running single crimped, electronic star delta timer, feather touch start / stop push buttons to be

erected on angle iron frame. Grouted on wall the contactors will be of L& T, Siemens , BCH make only) (A) S/D up to

318 12.00 Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy 13794.58 Rupees Thirteen Thousand Seven each

powder painted inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) Hundred Ninety Four And Paise

main fuses. Digital volt and current meter (in a single unit) with micro controller based control unit and current sensing single Fifty Eight Only

phasing preventer electronic overload protection, over voltage (Programmable) protection and under voltage (Programmable)

protection, prod less dry run protection programming facility for setting of all parameter like overload current, high voltage

limit, low voltage limit, dry run limit with digital indication on seven segment LED display for any fault like over load, high

voltage, low voltage, dry running single crimped, electronic star delta timer, feather touch start / stop push buttons to be

erected on angle iron frame. Grouted on wall the contactors will be of L& T, Siemens , BCH make only)(B) S/D up to

319 2.00 S.I.T.C. submersible pump set for bore of 150 mm. dia. Or, more having 3 phase motor capacity not more than 15 H.P. and 54933.90 Rupees Fifty Four Thousand Nine each

discharge capacity having, Lifting and Lowering taken extra.(D) ( 8 stage) 695 to 492 L.P.M. at the head 48 to 73 mtrs suitable Hundred Thirty Three And Paise

for 65/50 mm dia. delivery pipe Cat.III Ninety Only

320 50.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of 146.45 Rupees One Hundred Forty Six MTR

following Size. (C) 3 Core x 4 Sq. mm And Paise Forty Five Only

321 400.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of 488.84 Rupees Four Hundred Eighty Eight MTR

following Size. (F) 3 Core x 16 Sq. mm. And Paise Eighty Four Only

322 2.00 Lowering of submersible motor pump set at the depth of following ,complete with required. Nos. and size of casing pipes 856.48 Rupees Eight Hundred Fifty Six Per Job

erected by means of proper chain pulley block & pipe wrenches after checking of threads of each pipe with coupling to take the And Paise Forty Eight Only

load of the pump set and pipe assembly filled up with water (D)For Open well Horizontal submersible pump set for sump

well (i) 1 HP to 5 HP

323 16.00 Lowering of submersible motor pump set at the depth of following ,complete with required. Nos. and size of casing pipes 1284.72 Rupees One Thousand Two Per Job

erected by means of proper chain pulley block & pipe wrenches after checking of threads of each pipe with coupling to take the Hundred Eighty Four And Paise

load of the pump set and pipe assembly filled up with water (D)For Open well Horizontal submersible pump set for sump Seventy Two Only

well (ii) 7.5HP to 15 HP

324 2.00 EQUIPMENTS 648962.37 Rupees Six Lakh(s) Forty Eight Set

Surface Hydro-Pneumatic System for Domestic Water supply :Compact self contained Hydro-booster system comprising of Thousand Nine Hundred Sixty Two

following :Vertical In-line/Horizontal multi-stage, centrifugal clear water pumps with AISI304 Impeller and AISI316 Shaft, And Paise Thirty Seven Only

Cast Iron (FG260) Suction and Discharge with CED coating, TEFCIP55 motor (with Mechanicalseal) Vendor to submit

performance curves and technical catalogue of the proposed model for review and information Controller with colour touch

screen display and Variable Frequency Drive(VFD) integrated in a single body with pressure sensor transmitter, programming

to indicate pump ready, pump running and fault in display and capable to communicate with other controllers following

MODBUS-RTU or BACNET Class-2 protocol through RS485 port. System should be capable to compensate for frictional

losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection.

Indication of all type of faults / on-off status / electrical parameters shall be available on display and central BMS monitors.

Also able to work with pressure switch in manual mode operation. Source from same manufacturer of pump. Pre-charged

diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet header with necessary

flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel as per manufacturer recommendation) Set of

accessories such as G.I headers (with zink coating) for suction and discharge, control valves, non return valves, pressure

switches, pressure transducers, pressure gauge, common skid, inter connecting power and control cabling etc. Complete.

Set of Solenoid valve (IP68), control panel and y-strainer to maintain water level in OHT with float switch should be provided

Purpose of system - Domestic water supply system to each utility

Nos of system - 1set =2 working + 1 stand by

Flow rate of system (working pumps) - 650 LPM

Total Head of each pump - 60m

In Wards: - Rupees One Hundred Thirty Two Crore Sixty Three Lakh(s) Fifty Two Thousand Seven Hundred Eighty Three Only

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which NO extra payment shall be made.

2 The labour cess and Testing charge will be deducted as per prevailing rules i.e. 1% (LC) and 1% (Tsting) of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption Shall be deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 GST extra applicable in case of work based on SOR 2024-25 only.

6 Credit value For Dismentalling of Existing Strructure Rs.19,04,000.00/- must be recovered from the 1st RA Bill.

Deputy Executive Engineer Executive Engineer

P.I.U. Zone-7, Surat

P.I.U. Zone-7, Surat

Deputy Executive Engineer (Ele.) Executive Engineer (Ele.)

P.I.U. Zone-7, Surat

P.I.U. Zone-7, Surat