PROVISION OF CHILDREN PARK AT COST GUARD ENCLAVE MALKAPURAM VISAKHAPATNAM UNDER GE(I) (CG) VIZAG

Amount

Surface excavation n exc 30 cm deep & avg 15 cm and getting out in soft / loose soil complete all as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Surface excavation n exc 30 cm deep & avg 15 cm and getting out in Hard / dense soil complete all as directed..

M&L for hard core of broken stone or boulder, gauge n exc 63mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surfaces complete all as specified and directed.

M & L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation to a true surface complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block made with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade shall be laid on 50mm thick sand cushion complete all as specified and directed. (Note: Sand cushioning shall be measured and paid in relevant item here-in-after)

M&L for kerb stone of machine pressed rubber moulded precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) block of size 45cmX30cmX15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished complete all as specified and directed.

M & L for Preparation of new concrete surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (Zebra pattern) over a coat of alkali resistance primer primer complete all as specified and directed.

Removing excavated material to a distance n exc 50 mtr and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified & directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan area in hard / dense soil and getting out complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT bars 5 mm to 10mm dia as in stirrups / spacers / binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L forv RCC M-30 (Design Mix) (20mm graded aggregates) as in foundation, footing, mass concrete, foundation beam, plinth beam and base for column complete all as specified and directed.

M&L forv RCC M-30 (Design Mix) (20mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L forv RCC M-30 (Design Mix) (20mm graded aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Use & waste for flat formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits if any of foundations and plinth beams and similar work, etc, rough finished surfaces of concrete etc all as specified and directed

Use & waste for flat form work to sides of pillars, posts struts, piers columns and stanchions, square, rectangular or polygonal rough finished surfaces of concrete etc all as specified and directed

Use & waste for flat formwork to sides of concrete beams, cantilevers, bressummers, lintels over 1.5m span and similar work, etc, rough finished surfaces of concrete etc all as specified and directed

Returning, filling in incl spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified & directed.

Removing excavated material to a distance n exc 50 mtr and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified & directed.

M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed.

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only liquid water proofing compound complete all as specified.

M & L for glazed ceramic, coloured tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

S & F mild steel frame work such as grills, grating framed guard bar with ends of bars shouldered and / or riveted and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F rolled mild steel work conforming to Fe 410 -W (Gde E- 250) quality A as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M & L preparing plastered/ unplastered new surfaces of walls Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed.

M&L for 25mm thick playful EPDM sports flooring consisting with the followings:- (a) Base layer of recycled tire crumb rubber bonded with a 15% polyurethane binder incorporating 25mm Buffing Base and 6mm EPDM rubber for superior cushioning. (b) The top layer features shall be of 1- 4mm EPDM granules with 22% polymer content, mixed with a 20% polyurethane binder which has an NCO content of 10.47% and an average viscosity of 1478. These UV-resistant granules shall provide exceptional weather resilience and long-lasting color vibrancy. The flooring should have a tensile strength exceeding 4.0 MPa, elongation over 500%, and a hardness of 60 Shore durometer, Bulk Density 700 gram per square centimeter, Specific Gravity shall be more than 1.65 complete all as specified and directed.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumifion based fluoropolymer resin coating of approved colour and shade on one face and polymer (Service) coating on other face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5/MS with hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics complete all as specified and directed. (Note: (i) Design and shop drawing shall be submitted to GE duly vetted by IIT / NIT prior execution for his approval. (ii) Actual area on the external face of the curtain wall with aluminium composite panel cladding shall be measured for payment purpose)

Supply only approved vermi compost of best quality complete all as specified and directed.

Supply and plantation of foxtail palm, height of plant shall not be less than 2.00 m above ground level) including preparation of ground upto 30 cm deep and filling of good earth, cow dung, vermi compost and watering etc complete all as specified and directed.

Supply and plantation of Royal palm, height of plant shall not be less than 1.50 m above ground level) including preparation of ground upto 30 cm deep and filling of good earth, cow dung, vermi compost and watering etc complete all as specified and directed.

Supply and plantation of Ashoka Pendula, height of plant shall be 7 feet to 8 feet above ground level) including preparation of ground upto 30 cm deep and filling of good earth, cow dung, vermi compost and watering etc complete all as specified and directed.

Supply and plantation of Gulab (hybrid) different colour, height of plant shall shall be 2 feet to 3 feet above ground level) including preparation of ground upto 30 cm deep and filling of good earth, cow dung, vermi compost and watering etc complete all as specified and directed.

Supply and plantation of Amla Kalmi, height of plant shall shall be 2 feet to 3 feet above ground level) including preparation of ground upto 30 cm deep and filling of good earth, cow dung, vermi compost and watering etc complete all as specified and directed.

Supply and plantation of Bottle brush, height of plant shall shall be 3 feet to 4 feet above ground level) including preparation of ground upto 30 cm deep and filling of good earth, cow dung, vermi compost and watering etc complete all as specified and directed.

Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings complete laid in trenches complete all as specified and directed.

Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings complete laid in trenches complete all as specified and directed.

Supply, laying, connection and testing, 25mm bore, Steel water tubing, galvanised, medium grade with all fittings complete laid in trenches complete all as specified and directed.

S & F 15 mm bore, gun metal, globe or Gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F 20 mm bore, gun metal, globe or Gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F 25 mm bore, gun metal, globe or Gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Cutting, screwing and jointing existing pipe line upto 15 mm bore dia including inserting Tee / elbow necessary for connecting of existing pipe with new pipe complete all as specified and directed.

Supply , install, testing and commissioning of 1.5 HP booster pump, self priming, monoblock. Electric driven, single phase, 230 volt, discharge capacity 3.90 Lit / sec, head 5 m, suitable for sprinklers with and including DOL starter of suitable size, and electric cable from motor to starter and starter to main switch 25 m long complete all as specified and directed.

JAHNAVI ASSOCIATES (BID ID -3301554)

G Srinivas Rao (BID ID -3301895)

RAVI VARMA JAMPANA (BID ID -3302145)

SDG CONSTRUCTIONS (BID ID -3304065)

Buildtron Inc (BID ID -3297708)

SRI SIMHADRI COMPANY (BID ID -3307260)

Squad 7 Projects and Services Pvt Ltd (BID ID -3298874)