PROVISION OF CERTAIN SANCTIONED MINOR WORK REVENUE WORK LBW AND SPECIAL REPAIR WORK IN THE AREA OF AGE BR I UNDER GE ROORKEE

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specifid and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specifid and directed.

All as per iterm No 2.00 above but depth exceeding 1.50 mtr and n.exc 3.00mtr complete all as specifid and directed.

M&L for Plain cement concrete (1:4:8) Type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specifid and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specifid and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specifid and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L Sand filling 25mm thick under floors for cushioning to interlocking paver block complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment complete all as specified and directed complete all as specified and directed.

M&L Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed with gray cement and pigment set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15mm thick screed bed in Cement mortar (1:6) complete all as specified and directed.

M & L 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) sub base complete all as specified and directed.

M&L for providing cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in sides of PCC tiles, bed blocks, for hold fast, coping and similar work complete all as specified and directed.

M&L for Broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc. 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 m and making surface good in soft / loose soil complete all as specified and directed.

S&F MS Steel work in tubular trusses/purlin/ column/nut bolts/base plate including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed and directed.

Dismantling asbestos cement corrugated and semi corrugated steel sheet in roof covering complete all as specified and directed.

S&F 0.50 mm thick pre-painted galvalume zinc coated GI based corrugated /semi-corrugated sheet of any colour having tensile strength of 550 Mpa, fixed as in roof covering/cladding to wall with self tapping screws complete all as specified and directed.

S&F 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roof covering or wall cladding etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F asbestos cement two piece adjustable serrated ridge for corrugated/semi corrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Taking down wall/ceiling boards Asbestos plywood of any thickness including cover fillets complete all as specified and directed.

Providing and fixing tiled false ceiling of designer tiles (high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design (Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm Contd....

and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, all complete at all heights as per directions of EIC complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L Vitrified double charge tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Vitrified double charge shade, tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl laid over and including necessary adhesive (Tilofix), as on vertical surfaces such as skirting, dados, etc complete all as specified and directed.

Dismantling of unserviceable water tank 1000 ltrs capacity and removed from site complete all as specified and directed .

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position of capacity 1000 ltrs incl 20mm PTMT ball valve (Minimum weight 20 mm - 210 gms) (Ball valve make:- prayag) all as specified in SSR Part-I complete all as specified and directed .

Taking up or down 15mm dia steel tubing and connections complete all as specified and directed.

S&F 15 mm bore galvanised iron tubing 'medium grade' with all fittings and fixed to walls (open or concealed) and ceiling or laid under floors incl cutting chasing in wall for concealing of pipe if required complete all as specified and directed.

Demolition of Brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .

M & L for brick work in CM 1:6 using Sub class ‘B’ Bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M & L for brick work in CM 1:4 using Sub class ‘B’ Bricks straight or curved on plan any radius in half brick complete all as specified and directed .

Taking down cement or cement lime plaster on brick walls or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new/ old surfaces complete all as specified and directed. Make : Apex ultima protek of Asian Paint/Nerolac surakha advance of Nerolac paint/Berger Weather coat of Berger, complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and distempering two coats on new work with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/liter, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. Make : Royale of Asian Paint/Nerolac beauty sheen of Nerolac paint/Berger Weather coat of Berger. complete all as specified and directed.

M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new/ old surfaces complete all as specified and directed. Make : Apex ultima protek of Asian Paint/Nerolac surakha advance of Nerolac paint/Berger Weather coat of Berger.

M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and color complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed. Make : Royale of Asian Paint/Nerolac beauty sheen of Nerolac paint/Berger Weather coat of Berger.

M&L for preparation of new surfaces of wood or wood based material surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed.

S&F 0.56mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) and including fixing on wooden door shutter with nails complete all as specifed and directed.

S & F rolled mild steel framed work as in doors or gate of ornamental and intricate design conforming to Fe 290, Gde E-165, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hang as gates, including pintal hinges, stops, hand made sliding bolts etc. complete all as specified and directed.

S & F MS work as in hold fasts, bands supports, clamps, wall ties hooks incl nut and bolts, sliding door bolts hand made and similar small articles etc. conforming to Fe-410-0 or Fe-310-0 including welding etc. complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins / spring clips and S & F 3 mm thick plain sheet glass ordinary quality, fixed in squares n.exc 0.5 Sqm each pane complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed.

S & F in repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed.

S & F in repairs Health Faucet 8 mm dia 1.2 mtr long flexible tube & wall hook complete all as specified and directed. (Model : ALD-573, Make : Jaguar OR EQUIVALENT RANGE OF MARC, JOHNSON).

S & F in repairs CP toilet paper holder complete all as specified and directed. Make : Modal No AHS 1553 Jaguar / Marc / Johnson.

S & F in repairs towel rail 'D' type 600 mm long 20 mm dia Brass chromium plated fixed to wall with CP steel screws etc, complete all as specified and directed.

S & F in repairs mild steel chromium plated grating (round) 125 mm dia fixed in cement mortar 1:3 over floor/nahani trap (with hole or without hole) complete all as specified and directed.

S & F in repairs of 25 mm dia mild steel curtain rod covered with PVC Sleeves fancy type with and including mild steel fancy type end caps/knobs and brackets matching to colour of rod, stops, in suitable size, complete all as specified and directed. Note:- The rate deemed to be included for 1 pear of fancy type caps/knobs and brackets for each opening.

S & F in repairs PVC (SWR) pipes 75 mm bore single socketed (ISI Mark) in any length with rubber ring joints fixed to wall including taking down complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 110mm bore single socketed (ISI Mark) in any length with rubber ring joints fixed to wall including taking down complete all as specified and directed.

S & F in repairs PVC (SWR) bends / elbow 75 mm (ISI Mark) complete all as specified and directed.

S & F in repairs PVC (SWR) bends / elbow 110 mm (ISI Mark) complete all as specified and directed.

S&F in repairs PVC connection 600 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S & F in repairs 10 liters PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed.

S & F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. (MODEL : TQT - 511, Make : ESSCO, Jaguar Group OR EQUIVALENT RANGE OF MARC, JAGUAR, JOHNSON).

S & F in repairs stop/ Angle cock ISI marked fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. (MODEL : 88910 Make : Prayag, Jaguar Group OR EQUIVALENT RANGE OF MARC, JAGUAR, JOHNSON).

Dismantling RCC fencing post/ struts imbedded in PCC including taking out embedded portion & making good disturbed ground complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, of any size and type of standards, rails, straining bolts, incl dismantling of fencing etc. complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type of weight not less than 2.5 Kg/Sqm complete all as specified and directed.

S & F 10 mm round bars cut to length bent to shape for tying/ tightening wire mesh( Chain Link fencing) complete all as specified and directed.

S & F MS Work as in fencing posts/struts incl cutting, notching, drilling holes, welding for wire flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, ,etc complete all as specified and directed.

M & L Hard core, of broken bricks, broken to gauge n exc 63 mm complete all as specified and directed.

Formwork rough finished surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork rough finished surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Formwork rough finished surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork rough finished surface to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Formwork rough finished surface to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 72 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (nominal mix) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed .

Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (nominal mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed .

Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (nominal mix) as in chajjas complete all as specified and directed .

S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tubes, fixed in opening as per specification complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed .

S&F for Butt hinges 100 mm long, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F for 150mm long Mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S&F for 125mm long mild steel pressed handles, oval type, stove enameled black, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on other than fair face of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar (1:3) on ceiling or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 7-8 mm thick (square/ rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, laid in flooring over & including 15mm thick screed bed in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick, laid in vertical surfaces over & including 10 mm thick rendering in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for preparation of new surface on ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new surface on walls and applying three coats of white wash complete all as specified and directed.

M&L water proofing treatment to roof with following specification :- (a) M&L for surface preparation by removal of existing treatment of tar felt, brick tiling, loose particle to ensure or clean smooth and dry surface and preparing the surface. (b) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface.

(c) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.6 Kg/Sqm with non wovenpolyster fibre as reinforcement on primed surface by torch application with side over laps & joints over laps etc as per manufacturers instruction. (d) M&L for finishing of top surface by two coat of aluminium paint over a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufacturers instruction. (e) M&L for providing test with filling of water over roof slab continuously for 48 hours all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position of capacity 500 ltrs incl 20mm PTMT ball valve (Minimum weight 20 mm - 210 gms) (Ball valve make:- prayag) all as specified in SSR Part-I complete all as specified and directed .

S&F 20 mm bore galvanised iron tubing 'medium grade' with all fittings and fixed to walls (open or concealed) and ceiling or laid under floors complete all as specified and directed.

S&F 20mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed .

All as per item 94.00 above but 15mm bore long shank concealed type complete all as specified and directed .

S&F Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) 15mm bore complete all as specified and directed .

S&F 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed .

S & F 10 liters PVC (White) valve less symphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed.

S & F PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S & F vitreous china squatting pan (Orissa pattern) long pan including provision of cement concrete bedding fixed of size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed.

S & F vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed.

S & F plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed.

S & F stainless steel jet cleaner for ‘E’ type WC with flexible pipe complete all as specified and directed.

S & F angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed.

S & F vitreous china wash hand basin, white flat back size 550 x 400 mm (excluding tap) but including Waste coupling, waste pipe, porcelain stopper and a pair of MS bracket duly painted etc complete all as specified and directed.

S & F waste pipe of polyethylene of low or high density or PVC. 32 mm dia for WHB complete all as specified and directed.

S&F vitreous china urinal, Half stall type white (excl of flushing cistern and flush pipe & waste pipe) fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and incl 60mm long brass screw, urinal spreader of PTMT any colour fixing with 15mm dia pipe, pointing around urinal back in cement fixed as in complete all as specified and directed.

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

M&L 75 mm thick, PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in floor, hard standing, plinth protection etc finished even and smooth without using extra cement laid in alternate bays n.exc 2.50 Sqm and joints filled with mastic filling complete all as specified and directed.

M&L concrete bed to drain pipes with PCC 1:3:6 type C2, using 40mm graded stone aggregate including packing under, and haunching against the sides of pipes after they are laid and tested; in for 150 mm bore pipe complete all as specified and directed.

M&L for Salt-glazed stoneware drain pipes of grade 'A' laid in trenches and jointed as specified for 150mm bore pipe complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F 3.0 mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L 100 dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L 100 dia cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F swivel shower of PTMT any colour (minimum weight 40 gms) 15mm bore pipe complete all as specified and directed.

S & F PVC (SWR) pipes 75 mm bore single socketed (ISI Mark) in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F PVC (SWR) bends / elbow 75 mm (ISI Mark) complete all as specified and directed.

M/L for Designer ceiling board 4mm thick with GI framed work of size 4mm main 'T' 24x38.5mm and cross T of size 24X28.5mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24xx24x0.4mm covered with powder coated sheet 0.25mm thick for ceiling, ceiling boards 60cmX60CmX4mm thick, suspended with GI wire 3mm dia and up to 2 mtr long complete incl plugging in brick walls with steel rawl plugs @ 600mm C/C complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain mild steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Vitrified dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for reinforced precast cement concrete cover slabs type B1, 1:2:4 , 20 mm graded agg (for manholes, etc) with plain faces and set in cm 1:6 complete all as specified and directed.

S & F CP shower rose (single lever over head shower incl shower arm casted 240mm long flat shape with flange) 125mm size suitable for 15mm bore pipe complete all as specified and directed. Model: EOS-536A make: ESSCO (Jaquar) of equivalent of Prayag, Jaquar, pearl.

M&L for rendering 12 mm Thick in CM (1:6) on Brick surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick consist of two coats top layer 5 mm thick in CM 1:4 mixed with water proofing compound over 10 mm thick in CM 1:6, on fair faces of brick work finished even & fair complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails,MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles &rails eith suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing inthe frame at site as per specification & drawing complete all as specified and directed .

All as per item No 124 above but fully glazed i e glass panes used instead of 5mm PVC sheets panels for vent etc complete all as specified and directed .

S&F PTMT Butt hinges 100 mm make 'PRAYAG' complete all as specified and directed.

S&F PTMT Butt hinges 75 mm make 'PRAYAG' complete all as specified and directed.

S&F PTMT Tower bolt 200 mm make 'PRAYAG' complete all as specified and directed.

S&F PTMT door handles 125mm make 'PRAYAG' complete all as specified and directed.

S&F 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F for brass chromium plated bib tap (short body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. (MODEL : TQT - 511, Make : ESSCO, Jaguar Group OR EQUIVALENT RANGE OF MARC, JAGUAR, JOHNSON).

S & F for stop/ Angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. (MODEL : 88910 Make : Prayag, Jaguar Group OR EQUIVALENT RANGE OF MARC, JAGUAR, JOHNSON).

S & F 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F towel rail 'D' type 600 mm long 20 mm dia brass chromium plated fixed to wall with CP steel screws etc complete all as specified and directed.

S & F PVC (SWR) pipes 110 mm bore single socketed (ISI Mark) in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F for 15mm Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. (Model : 8903 Make : Prayag OR EQUIVALENT RANGE OF Jaquar, JOHNSON).

M & L for writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm compete all as specified and directed.

M & L reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (nominal mix) for foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed .

M & L reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (nominal mix) for columns, pillars, piers, posts and struts complete all as specified and directed .

M & L 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

Formwork rough finished surface to sides of pillars, posts,struts, piers, columns and stanchions complete all as specified and directed.

Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (nominal mix) as in walls complete all as specified and directed .

M&L for PCC (1:2:4) TY B2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed .

M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed .

M&L for non skid joint free coloured ceramic tiles 7-8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, laid in flooring over & including 15mm thick screed bed in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and directed.

M&L for 40mm thick PCC (1:2:4)ty B0 using 12.5mm thick coarse aggregate as in padding of roof slab, finished even and smooth complete all as specifed and directed.

Surface dressing n.exc (not exceeding) 15 cm deep in soft / loose soil complete all as specifid and directed.

S & F TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for concealed Point wiring with 1.5 Sqmm(Nominal area) PVC insulated, unsheathed FRLS multi stranded copper conductor single core cable 1100 Volt grade drawn through and including PVC conduit of 20 mm dia ISI marked with complete accessories, including modular type galavanised iron steel sunken boxes suitable for modular type switches, sockets, also including PVC insulated and unsheathed single core multi stranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly, CONTD....

including taking down of existing point wiring and their connected fittings & fixtures like switches, sockets, Ceiling rose, fan regulator etc and making good disturbed surface with white wash or any type distemper as per existing colour of building complete all as specified and directed for the following :- Note for Point wiring:- (i) The quoted rate is deemed to be include the price of G I sunken box suitable for modular type switches, sockets etc of any module size & shape. (ii) The quoted rate is also deemed to be include the rate of cover plate, blank plate of any type and any module. (iii) The quoted rate is deemed to be included rate of dismantling of existing point of any type including fittings & fixtures complete.

One light point controlled by one, one way modular type switch complete all as specified and directed.

One Ceiling/exhaust fan point controlled by one, one way modular type switch complete all as specified and directed.

One 3/5 pin socket outlet 5 Amp on the same modular board with other switches complete all as specified and directed.

One 3/5 pin 5 Amps modular socket outlet on independent modular board complete all as specified and directed.

One bell/buzzer point controlled by one modular type bell push button complete all as specified and directed.

All as per item No 150.00 & 151.00 above but concealed wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed FRLS cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed FRLS cable, green colour as earth continuity wire, controlled by one, one way 16 Amp modular switch complete all as specified and directed.

Supply and fix modular type white colour switch 6 Amps one way, AC 230 volts in one modules complete all as specified and directed.

Supply and fix modular type white colour 6 Amp 3 pin shuttered socket, 230 volts in 2 module complete all as specified and directed.

Supply and fix modular type white colour shuttered socket 6/16 Amps 230 volts in 2 module complete all as specified and directed.

Supply and fix modular type white colour switch with indicator 16 Amps, 230 volts in 1 module complete all as specified and directed.

Supply and fix modular stepped type 4 Step Energy Saving electronic Fan Regulator suitable for 2 module, white colour AC 230 V, including connecting complete all as specified and directed.

Supply and fix buzzer, Ding Dong AC 230 volts single pole complete all as specified and directed.

Supply and fix modular type bell push switch in one module 10 Amp AC 230 volts complete all as specified and directed.

M&L for Ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps,250 volts AC ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed. Make: Havells (ROHS)cat part No . AHLHXCW000 in Anchor (Penta)

S&F Angle holders (metal ring) PVC / polycarbonate type with back plate, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete suitable for fixing of LED bulb complete all as specified and directed. Make: Havells(ROHS) cat part No AHLHXAW000 in Anchor (Panta)/ Legrand”

S&F in replacement of old unserviceable light fittings LED tube light fitting 1x20 Watt industrial batten box type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire incl 01 no. 20 watt retrofit LED tube rod T8 polycabonate to be fixed at any height of wall/ceiling complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Crompton Cat Part No-ENDURALINEARNEOBS10WLED865SPCWH, OR BAJAJ Cat Part No-112407 BCLSB 10 WH (WHITE)

S & F In replacement of old unserviceable Building security light fitting versatile pressure die-cast aluminium with high power LED 25 W as light source complete with LED 25 W 5000K including brackets made out of GI pipe light grade pipe bent to shape incl 02 Nos MS flate clamps incl nut bolts connection complete all as specified and directed. Make : C&S cat part No. LTESS25WLED/LS model in Havells/Wipro/Philips

S & F recesss mounting light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow suitable for 600 x600 mm surface monuted or false ceiling including making electrical connection from ceiling rose to light fittinf complete all as specified and directed. Make: C&S Cat . LTCRP36WLED2X2 or Cropmton Model AURA-1/Philips Model Cirrus suface

S & F Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 4.0 sqmm LT, 1100V grade, drawn through and incl adequate sizes PVC non metallic conduit of 20mm/approprite dia with accessories and fittings and one run of 4.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor. Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm/approprite dia shall be measured as one run length, Cable required for connection to DBs shall deemed to be incl and shall not be measured separately. Earth wire shall run inside the conduit pipe including taking down old sub main wiring complete all as specified and directed.

All as per item No 171.00 above but sub main wiring with two run of 6.00 Sqmm copper conductor and one run of 6.0 Sqmm as earth continuity conductor complete all as specified and directed.

S & F in replacement of old unserviceable Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,single pole and neutral 250 volts ,flush to wall complete all as spd and directed.

S & F in replacement of old unserviceable Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,flush to wall complete all as specified and directed.

S & F in replacement of unserviceable TPN DB- VTPN for independent mounting fixed on wall duly flush mounted, 4 way, IP 43, IK 09 with 250 Amp Bus bar complete all as specified and directed. Make : C & S cat part No . CSDBMCCB125PDD04S in ABB/ INDOASIAN/Legrand/Havells

S & F in replacement of unserviceable MCCB 100 Amp four pole, 415 volt, 25kA adjustable thermal and magnetic setting including necessary connection complete all as specified and directed. Make: : Legrand cat part No.420013 model in ABB/INDOASIAN/C&S

S & F in replacement of old unserviceable MCBs single pole,6 to 32 Amp 240 volt C-curve 10 KA, complete all as specified and directed.

S & F in replacement of old unserviceable MCBs single pole and neutral, 6 to 32 Amp 240 volt C-curve 10 KA complete all as specified and directed.

S & F in replacement of old unserviceable MCBs ISI marked 415 Volt, 50 Hz, four pole 63 Amps, breking capacity 10 KA complete all as specified and directed.

S & F in replacement Single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps 240 volt grade complete all as specified and directed.

S&F decorative post top lantern luminaries fitting LED type suitable for mounted on gate pillar for 360° indirect light with IP 65 protection, glare-free and better uniformity light, including provision of GI pipe light grade of suitable dia and suitable length grouted in pillar for mounting fitting complete all as specified and directed. Make: Havells RUBYPT35WLED830PSYMTOPC, Crompton Maple series Cat Pt No LPTO-40-CDL /M in Bajaj / Philips

Supply and fix Weather proof flat twin core cable aluminium conductor of size 6 Sqmm passing through pvc conduit for garden light connections complete all as specified and directed.

S & F Globe type Lantern light fitting of capacity 1x7/8 Watts with B-22 base LED lamp transparent polycarbonate diffuser and fixing arrangement including light grade GI Pipe 50mm burried in ground all as specified and directed at site and electrical connection from junction box to light fitting complete all as specified and directed. Make : Havells Cat . LHFXBON1TN6F023 or any equivalent model in C&S/Philips/Wipro.

S & F wall lantern light fittings made out of brass bracket with 240mmx80mm decorative base, brass arm 250mm. lenghth provided with 52mm length x34mm dia Gallery inside brass 2 pin holders . both side Arm 2 ornamental flowers frosted glass shade 155mmx129mm finish vlack nickel & Gold plasted suitable for 3 to 5 Watts LED bulb complete all as specified and directed. Make: Mepro Cat No-MBBS-803 in Havells/Bajaj

Supply and fixing Energy efficient Ceiling Fan, 1200mm sweep, 40 watt power consumption , 350 RPM, 218 Air delivery, BEE three star rating fan, colour in Bianco, Aerodynamic blade, 230V, including hanging clamp of suitable size made out of MS flate iron of thick ness not less than 50x5 mm, nut bolt and washer complete all as specified and directed.

S&F Exhaust fan steel body of 300 mm Sweep with louvers, 240volt, single phase including making connection cutting holes of suitable dia for exhaust fan in any type of wall including finishing and making good as per existing surrounded wall complete all as specified and directed.

S&F Exhaust fan PVC body 150mm sweep with louvers, power 24 W, 1400rpm, high speed white colour 240volt, single phase including making connection cutting holes of suitable dia for exhaust fan in any type of wall including finishing and making good as per existing surrounded wall complete all as specified and directed.

M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I CONTD....

and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) (chamber size not less than 300x300x300mm interier diamentions), type C-1 RCC (1:3:6) 150mm wall thickness chamber, RCC (1:2:4), type B-1 for chamber cover 80mm thick, reinforced with 8 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame using ISA 50x50x6mm etc., complete all as specified and directed. NOTE: The unit rate includes 4mm dia GI earth strip and 20mm dia GI light grade protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point. and chamber shall be made 0.5 mtr away from the earthing pit.

M & L concealed Point wiring with 1.5 Sqmm(Nominal area) PVC insulated and PVC unsheathed FRLS multi stranded copper conductor single core cable drawn through and including PVC non metallic conduit of 20 mm dia ISI marked with complete accessories,including sunk mild steel 1.6 mm thick terminal boxes with 3 mm thick bakelite sheet top cover ISI marked complete including PVC insulated and unsheathed single core multistranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth and earth dolly, including taking down of existing point wiring and their connected items/ accessories, fittings and fixtures complete making good the disturbed surface with cement plaster 1:3 and finished with white wash or any type distemper as per existing colour of building complete all as specified and directed for the following:-

One light/Exhaust fan point controlled by one one way switch complete all as specified and directed.

One fan point controlled by one one way switch complete all as specified and directed.

One 3/5 pin socket outlet 5 Amp on the same board with other swithes complete all as specified and directed.

One 3/5 pin 5 Amps socket outlet on indepandant board complete all as specified and directed.

All as per item No 190.00 above here in before but with 2.5 Sqmm (nominal area) FRLS cable PVC for the 15 Amp 3/5 pin socket power point including 1.5 Sqmm copper conductor as per colour coading for earth contineuity complete all as specified and directed.

Supply and fix switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

Supply and fix switch piano flush type polycarbonate single pole one way 15 Amps complete all as specified and directed.

Supply and fix socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type complete all as specified and directed.

Supply and fix socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type complete all as specified and directed.

Supply and fix of electronic fan regulator 230 volts, step type (5 step) socket type, hum free 100/300 watt complete all as specified and directed.

Supply and fix angle holder PVC/ polycarbonate type with back plate fixing on sunmica/hylim plastic laminated round sheet suitable for fixing of LED/CFL bulb complete all as specified and directed.

Supply and fix LED tube light fitting 1x20 Watt T 8 LED batten integrated type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire incl 20 watt retrofit LED tube rod T 8 polycarbonate complete all as specified and directed . Make:- Cat Part No: REGAL BATTEN T-UP to 1x22W SS BSWH (batten ) PHOTON ULTRA E-2.01213T8SSTL20W LED 865 SPC (T-8 Rod)b of Make of Havells Cat Part No; 112181BLRB-DB 118 (batten), 112481BLRB21WCWC (T-8 Rod) of Make Bajaj, Cat Part No : LTDC0161820WLED+LT4F20WLEDT8WD Make of C&S

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc complete all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with two pin and earth plug and socket also including MCB Single Pole 20 Amps, 240 Volt and fixed flush in wall suitable for geyser connection complete all as specified and directed.

M&L for sub main wiring with PVC insulated unsheathed 2 x 2.5 Sqmm stranded copper conductor cable 1100 Volts grade, heavy duty, drawn into concealed PVC conduit medium grade with 1.5 Sqmm PVC insulated green copper cable for continuous earth with PVC conduit of size not less than 20 mm dia with all accessories complete all as specified and directed.

Supply and fixing of fan hook including suitable grounting/fixing in the ceiling/Truss/GI pipe complete all as specified and directed.

Supply, laying/ passing through wall by clamping/passing through ceiling LT cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power couples (heavy duty) with aluminium conductor, 1100 volts grade of size 10 Sqmm 2 core complete all as specified and directed.

Supply and lay in trench/floor/ wall/hard standing for protection of cable through GI pipe light grade 40 mm bore including its fittings such as bends sockets etc for cable protection complete all as specified and directed.

S&F SPN DB 4 way double door vertical type flush to wall 240 volt complete all as specified and directed.

S&F in MCB/Isolator double pole 32/40 Amps AC 230 Volts, 'C' curve series with 10 KA breaking capacity including necessary lugs/ thimbles complete all as specified and directed.

S&F of MCB SP 6-32 Amps AC 230 Volts, 'C' curve series with 10 KA breaking capacity including necessary lugs/ thimbles complete all as specified and directed.

Supply and fixing GI pipe 20 mm medium grade laid in trench or road crossing including all fittings and fixtures complete all as specified and directed.

S&F 20 mm dia Gun metal, globe or gate valve with iron wheel head, screwed both ends for pipe and fixed to 20 mm dia bore pipe complete all as specified and directed.

M&L screwing existing steel tubing 20 to 50mm dia for alteratioon or additions (or lengthening) screw on pipe to form branch line) complete all as specified and directed.

Supply and fixing replacement of LED Street/security Light Luminaire 35 Watt with pressure die cast housing along with prismatic polycarbonate diffuser and LEDs with secondary optics and IP65 protection including brackets made out of GI pipe light grade of suitable dia or as per manufaturere recommonded, bent to shape incl 02 Nos MS flat bent to shape incl 02 Nos MS flat clamps, nut bolts, termination with the help of 3 core 1.5 Sqmm PVC insulated,unsheathed copper conductor multistranded cable complete all as specified and directed.

S&F MCB SPN 32 Amps,AC 230 Volts, 'C' curve series with 10 KA breaking capacity including necessary lugs/ thimbles complete all as specified and directed.

Supply and fixing LED bulb of 15 watt suitbale for batten / angular holder complete all as specified and directed.

Drilling and tapping GI water mains 50/40mm bore (in position) for branch connections of the internal dia 20 mm complete all as specified and directed.

M&L for straight plain brass ferrules (or connecting screws) screwed both ends and fixed to water mains for tapping branch connection of size 15 mm bore complete all as specified and directed.

S&F 20 mm bore galvanised iron tubing 'medium grade' with all fittings and fixed to walls (open or concealed) and ceiling or laid under floors incl cutting chasing in wall for concealing of pipe if required complete all as specified and directed.

Supply and lay in trench/floor/wall/hard standing GI pipe light grade 40 mm bore including its necessary fitting such as bends sockets etc for cable protection complete all as specified and directed.

Material and labour for river washed and screened dry sand for filling in trenches below and around underground cables for cushioning of cables etc complete all as specified and directed.

Supply & lay in trenches sub class `B’ bricks having compressive strength 75 Kg/ Sqcm for cable protection etc complete all as specified and directed.

Supply & Fix in replacement of old unserviceable LED flood light fitting 50 watt capacity with SMD LED pressure die cast aluminium housing with reflactor including making electrical connection from ceiling rose to light fitting complete all as specified and directed. Make:- C&S cat part LTEFR50WHPLED flood light or any equvilant model in Havells/Philips/Wipro

Supply & Fix wall fan 400mm sweep RPM 1320 AC 230 volt 50 Hz capacity including necessary fixing on wall complete all as specified and directed.

Supply, laying/ passing through wall by clamping/passing through ceiling LT cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power couples (heavy duty) with aluminium conductor, 1100 volts grade of size 16 Sqmm 2 core complete all as specified and directed.

4 DIMENSIONS

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS