Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L1₹1.6 LRejected-AOC | L1 | Rejected-AOC Second lowest | |
| 3 | L3₹1.6 LRejected-AOC | L3 | Rejected-AOC Third Lowest | |
| 4 | L4₹1.6 LRejected-AOC | L4 | Rejected-AOC Fourth Lowest | |
| 5 | L5₹1.6 LRejected-AOC | L5 | Rejected-AOC Fifth Lowest |
Tender Value
₹1.7 L
EMD Value
₹4,341
Closing Date
23 Aug 2024, 5:00 pmClosed
Assistant Executive Engineer
Assistant Executive Engineer PWD Buildings Sub Division Kollam.
GENERAL-Maintenance of Police Quarters HC No. 10 in Asramam Police Quarters, Kollam-General civil work.
2024_PWD_685331_1
ET-23/AEE/KLM/2024-2025
Open Tender
Civil Works - Buildings
Item Rate
180 days
kollam
Please refer Tender documents.
9 documents required · 9 mandatory
₹555
Yes
₹4,341
Yes
24 Sept 2024
13 Aug 2024
27 Aug 2024
13 Aug 2024
23 Aug 2024
13 Aug 2024
Amount
Maintenance of Police Quarters HC No. 10 in Asramam Police Quarters
14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface
14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work
50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood
50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood
14.29:Providing and fixing M.S. round or squre bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.
50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
50.18.7.5.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall
50.18.7.6.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall
18.54.2:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122 mm long, weighing not less than 99 gms
18.63:Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
OD19386/2024-2025:Plumber
OD19387/2024-2025:Engaging carpenter
OD18106/2024-2025:Engaging scavenger
A JAYAKUMAR
AZEEZKUTTY
sreeghanan
SIVANKUTTY NAIR V
S.DILEEP KUMAR
Bidder Name
A JAYAKUMAR
AZEEZKUTTY
S.DILEEP KUMAR
sreeghanan
GOPAKUMAR S
SIVANKUTTY NAIR V
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1066467.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .