Extension, Construction and Providing Drip water sprinkling facility at C-Camp Rythu Bazar, Kurnool of A.M.C, Kurnool in Kurnool District

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming whenever necessary dressing the bottom of foundations to levels in all direction, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.

Filling of foundations with conveyed Stone dust free from admixture of foreign material in layers of 15cms. Thick, watering, tamping, including cost and conveyance of all materials to site from approved source, labour charges of all items of work and all incidental and operational charges etc., complete as per standard specification referred and direction of the departmental officers.

P.C.C (1:4:8) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, Centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., and all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering.

a) For Footings

b) For Pedastals

e) For Roof Beam

f) For slab 125mm thick

g) For Tie Beam

h) For Gutter Beam

Providing High Yield Strength Deformed steel bars (Fe 500 - Lap slicing grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20 SWG for forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position and tying etc., complete for finished item of work.

Supply and fixing of 20mm dia 1.00 m long mild steel foundation bolt with necessary thread, bolts, nuts and washers and placing them in position including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Fabrication, Supply and fixing of Curved Roof Truss of 60 x 40 x 2.90mm for Top, Bottom Chords and internal zigzag member with baseplate of size 0.38 x 0.38mm x 10mm thick and welding fabrication fixing in position with necessary bolts, nuts washers, Gusset Plates including cost of MS pipes with welding cutting and loading, unloading charges fabrication and erection and cleats including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Fabrication, Supply and fixing of M.S Rectangular tube 80x40x2.90mm @ 5.03kg/Rmt 3.00m long by welding of size 100mm x 50mm x6mm cleats bolt sides of the pipe in position with necessary bolts, nuts, washers including Cost of pipe, welding, cutting and loading, unloading charges etc., complete as per Standard Specification and as directed by the Engineer-in-charge for finished item of work.

Fabrication, Supply and fixing of M.S. Rectangular tube 60x40x2.90mm @ 4.12kg/Rmt 3.00m long by welding of size 100mm x 50mm x6mm cleats bolt sides of the pipe in position with necessary bolts, nuts, washers including Cost of pipe, welding, cutting and loading, unloading charges etc., complete as per Standard Specification and as directed by the Engineer-in-charge for finished item of work.

Roofing With 0.5mm thick galvanized /pre painted G.I profiled sheets with crimp of 200mm length fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws .End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification for finished item of work.

Fly ash Brick Masonry in C.M. (1:6) prop. using cement Solid bricks of size 290mm x 230mm x 140mm including cost and conveyance of all materials to site, scaffolding charges, Seniorage charges of all materials, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers.

Supply and fixing of Rolling shutter made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end locks, mounted on specially designed pipe shaft of 50mmdia nominal bore MS B class pipe with brackets,plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete painted with one coat of approved steel primer, locks, ball bearings, all acessories etc., complete for finished item of work.

Flooring with M20 grade mix using 20mm HBG / HBT machine crushed meta1, course and fine agreegate including cost and conveyance of all materials to site from approved source, centering machine mixing and vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by the Engineer-in-Charge for finished item of work.

Ceiling Plastering with C.M (1:3) 12 mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.

Plastering with C.M (1:5) 20 mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.

Plastering with C.M (1:5) 12 mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.

Excavated Earth and Site clearing including lifting, transporting and disposing garbage and debris wastes from work site to outskirts of Kurnool city with a lead of 10 Km including cost and conveyance of all materials and all labour charges complete for the finished item of work

Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers. For New Iron Work

White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work.

Painting to new walls with two coats of Emulsion Paint of approved brand and shade over a base coat of approved cement primer grade I making three coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work.

Dismantling Old Structures

Dismantaling and clearing away Reinforced cement concrete and carefully stacking materials useful for reuse including cost and conveyance of all material and all labour charges etc., complete for finished item of work as per Standard Specification and as directed by departmental Engineer-in-charge.

Dismantaling and clearing away RR Masonry in cement mortar and carefully stacking materials useful for reuse including cost and conveyance of all material and all labour charges etc., complete for finished item of work as per Standard Specification and as directed by departmental Engineer-in-charge.

Supply and fixing in position M.S Ornamental Grill Gates using M.S flats, square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in RCC or Masonry works and making good the same where ever necessary, including cost and conveyance of all materials, labour charges and all other incidental and operational charges etc., complete as directed by the departmental officers.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Dadooing to internal walls with ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water etc., complete etc., complete for finished item of work.

Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers.

Providing and placing on terrace (at all floors levels) polyethylene syntex water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials, labour charges etc., complete as per Standard Specifications and as directed by the departmental officers

Supplying and fixing Indian pattern White Glazed W.C. 1st quality ISI Marked Cofirming to IS:2556-Part-3-1981 with "P" or "S" trap: 580mm Long including Labour charges only for fixing Indian Pattern W.C. with "P" or "S" trap etc., complete.

Supply and fixing Indian make Flat Back Wash Hand Basin with Pedastal (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 min nomianl size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 Standard brackets including wooden block: 630 X 450 mm Double C.P. Pillar cock.

Manufacture, Supply and Delivery of Unplasticised PVCs pipes 110 mm dia for portable water supplies confirming to IS : 4985 / 2000 (3rd revision) with bell ends (Socket) as per specification in light (Grey / Natural Ivory Grey / Any other color (except white) inclusive of transportation to the sub divisional stores anywhere in Andhra Pradesh excluding taxes

Manufacture, Supply and Delivery of Unplasticised PVCs pipes 25 mm dia for portable water supplies confirming to IS : 4985 / 2000 (3rd revision) with bell ends (Socket) as per specification in light (Grey / Natural Ivory Grey / Any other color (except white) inclusive of transportation to the sub divisional stores anywhere in Andhra Pradesh excluding taxes

Manufacture, Supply and Delivery of Unplasticised PVCs pipes 20 mm dia for portable water supplies confirming to IS : 4985 / 2000 (3rd revision) with bell ends (Socket) as per specification in light (Grey / Natural Ivory Grey / Any other color (except white) inclusive of transportation to the sub divisional stores anywhere in Andhra Pradesh excluding taxes

Supply and Fixing of Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size including labour charges for fixing the shutter to the frame etc., complete for finished item of work.

Supply and Fixing of Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size including labour charges for fixing the shutter to the frame etc., complete for finished item of work.

Supply and Fixing of 12.7 mm N.P bib tap Indian make heavy dutys including labour charges for fixing the shutter to the frame etc., complete for finished item of work.