Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹20.2 L
EMD Value
₹21,000
Closing Date
7 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Dy Conservator of Forest, Social Forestry Division,Navsari
NEW CONSTRUCTION OF RANGE FOREST OFFICER QUARTER, VANSDA AT RANIFALIYA IN VANSDA RANGE, SOCIAL FORESTRY DIVISION, NAVSARI GOVERNMENT OF GUJARAT FOREST
366553
12 of 2026-27
Open
Civil - All
Works
Navsari
10 documents required · 9 mandatory · 1 optional
₹900
Deputy Conservator of Forest, Social Forestry Division, Navsari
₹21,000
18 Nov 2026
18 Nov 2026
18 Nov 2026
7 Dec 2026
18 Nov 2026
120 days
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Clearing and grubbing road land including uprooting rank vegetation grass
bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of
1 trees cut earlier and disposal of unserviceable materials (C) By mechanical Hectare 0.01 28,455.09
means in area of light jungle
Excavation for foundation for depth from up to 1.5 M. m including
sorting out and stacking of useful materials and disposing off the
2 excavated stuff up to 50 Meter lead.(B) Dense & Hard Soil, etc. Cmt 90.10 153.33
complete as per detailed & directed by EIC.
Excavation for foundation for depth from 1.5 m to 3.0 m including
sorting out and stacking of useful materials and disposing off the
3 excavated stuff up to 50 Meter lead.(C) Hard Murrum, etc. complete Cmt 36.30 280.38
as per detailed & directed by EIC.
4 20cm. thickness including watering, ramming and consolidating etc. Cmt 53.20 296.29
complete. (more than 10 ton)
Filling available excavated earth (excluding rock) in trenches.
plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth
5 consolidating each disposited layer by ramming and watering. Cmt 88.50 133.65
Carring out plinth treatment to post construction / existing structure by
spraying chemical solution for termite control treatment including labour
and material consistent with I.S.I specification. Using Chlordane and
Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one percent
6 is recommended i.e one liter 20 EC chemical emulsion with 19 liter give 1 % Smt. 88.60 81.20
concentration inclusive of one liter chemical emulsion application at the rate
of 5 Liter chemical/ Sqm of surface is recommended as per I.S.
Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-
Graded brick bat aggregate 40mm normal size) and curing complete
excluding cost of formwork in (A) Foundation and Plinth
GRADE SLAB (M200) : Providing and laying controlled cement concrete
M.200 Concrete with all lead, including all transportation, pumping,
pouring, curing of concrete etc complete including the cost of formwork but
8 excluding the cost of reinforcement for reinforced concrete work in M200 Cmt. 11.50 4,793.36
Grade Slab
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
9 reinforcement for RCC work in Foundations footings, base of columns and Cmt. 6.10 4,644.03
Raft etc., for any type of cross section area complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
10 reinforcement for RCC work in column up to plinth lvl. etc., for any type of Cmt. 2.50 6,359.97
cross section area complete as directed by E. I. C.
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
11 reinforcement for RCC work in TIE, GROUND, & PLINTH BEAMS for any type Cmt. 10.00 6,328.76
of cross sectional area. etc., complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
12 reinforcement for RCC work in (D) For Columns for any type of cross Cmt. 3.90 7,767.81
sectional area for G.F. Lvl. etc., for any type of cross section area complete
as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
13 reinforcement for RCC work in LINTLE-BEAM, LINTEL & SILL for all cross Cmt. 2.00 6,328.76
sectional area at G.F. Lvl. etc., complete as directed by E. I. C.
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4-
graded stone aggregates 20 mm nominal size) for reinforced concrete
Chhajjas not exceeding 10cm. thickness upto floor two level including
14 finishing the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine Cmt. 1.10 6,601.67
sand) to give a smooth and even surface centering and formwork and curing
complete excluding cost of reinforcement.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
15 reinforcement for RCC work in SLAB BEAMS for Ground floor & Super Cmt. 5.90 6,663.02
structure, & for any type of cross sectional area. etc., complete as directed
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
16 reinforcement for RCC work at Plinth to Ground FLOOR SLAB for all Cmt 13.90 6,513.74
thickness/cross section etc. complete as directed by E. I. C.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including
bending, binding and placing in position complete upto ground floor level
Brick work using common burnt clay building bricks having crushing
strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement
Mortar 1:6. (1- Cement : 6 -fine sand)(B) Conventional
Brick work using common burnt clay building bricks having crushing
strength not less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement Mortar
1:6 (1-Cement :6-finesand) (B) Conventional For Ground Floor etc.
19 Complete. Cmt 31.90 4,403.40
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Brick work using common burnt clay building bricks having crushing
strength not less than 35 kg./Sq.Cm. at First floor Lvl. in cement Mortar 1:6
(1-Cement :6-finesand) (B) Conventional For First Floor etc. Complete.
Half brick masonry in common brunt clay building bricks having crushing
strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -
coarse sand ) (B) Conventional half brick masonry at Ground Floor level.(B)
21 Conventional Smt 24.40 669.34
Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any height
with all labour & material, etc. Complete, as per detailed & directed by EIC.
Providing 15mm thick cement plaster in single coat on Rough (Similar)side
of single or half brick walls for interior plastering for Ground floor level and
finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)
Providing 10mm thick cement plaster in single coat on brick/concrete walls
for interior plastering for Ground Floor level and finished even and smooth
in (ii) Cement mortar 1:4 (1- cement :4-sand)
Providing 20 mm thick double coat mala cement plaster on interior brick /
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough
25 finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Smt 268.10 279.29
Coarse sand) finished with trovel including scaffolding curing etc. complete.
Add for plaster groove in plastered surface or moulding to R.C.C.
projections.
Providing and laying polished Kota stone slab flooring over 20mm (Average)
thick base of cement mortar 1:6 (1-cement: 6-coarse sand) or L.M. 1.1.5 (1-
Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry
27 mixedwith pigment to match the shade of slab including rubbingand Smt 11.50 1,010.92
polishing etc. complete. (A) 25mm thick
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base
of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on
existing flooring by adhesive material including dismentaling of existing
28 flooring and jointed with color cement slurry including finised with flush Smt 59.80 1,053.32
pointing & cleaning the surface etc. complete for light shade
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base
of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on
existing flooring by adhesive material including dismentaling of existing
29 flooring and jointed with color cement slurry including finised with flush Smt 2.90 1,432.78
pointing & cleaning the surface etc. complete for antiskit.
Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x 24" or as
specified in skirting risers of steps and dedo on 10mm thick. cement plaster
1:3 (1-cement: 3-coarse sand) and jointed with white cement slurry as per
30 the detailed by Architect & direction of Engineer-in- Charge. Smt 40.30 1,169.98
Providing and laying Ceramic tiles 6mm thick in flooring, treads of steps and
landing laid on a bed of 12mm thick Water proof cement plaster with mortar
1:3 (1-cement : 3- coarse sand ) & Water Proofing Chemical Agent and
31 cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 Smt 4.00 1,214.07
including neat cement finishing, watering etc. complete finishing with flush
pointing in white cement. (UG Tank Floor)
Providing and laying Ceramic tiles 6mm thick in skrting, risers of steps and
dedo on 10mm thick Water proof cement plaster with mortar 1:3 (1-cement
: 3- coarse sand ) & Water Proofing Chemical Agent and finishing with flush
32 pointing in white cement. (UG Tank Walls) Smt 16.00 1,183.62
Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished
at all exposed Surface, Pre-moulded and pre-polished, machine cut Granite
of any colour and shade, & finish, as per detailed by architect /
Consultantfor flooring, dado skirting, cladding, steps and risers, kitchen
platforms, vanity counters, window sills , fascias and similar locations of
required size, approved shade, colour and texture laid over 20 mm thick
33 mortar 1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting on Smt 25.10 2,369.76
In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment,
epoxy touch ups, including Spacer tape 6.4 mm thick x 4 TO 6 mm as per
detailed groove, rubbing, curing, moulding and polishing to edges to give
high gloss finish as per concept etc. complete at all levels.
Providing and fixing sandwich type platform including supplying and fixing
granite stone 18 mm thick mirror polished stones in top and side position
and vertical strip at front over 25 mm thick polished kota stone platform
34 fixing in top and sides and intermediates supports fixing with cement Smt 1.70 7,455.62
mortar and adhesive and finishing including making recess for Kitchen/
Laboratory sink etc. complete as approved and directed by Consultant / EIC.
Providing and laying broken chine mosaic flooring for terrace using 12 mm
to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to
plain or slope and to be tempered to bring mortar creme out upto surface
35 using white cement including rounding off junctions and extending them Smt 89.00 765.97
upto 15 cm along the wall,clearing with water and oxalic acid etc. as
Providing and fixing 35 mm thick (or as specified) ISI marked flush door
shutters conforming to IS : 2202 (Part I) decorative type, core of block board
construction with frame of 1st class hard wood, with 1mm. thk, ISI marked
designed laminate in any finish on both faces of shutters., slit openings with
bidding Patti & 6mm thk designed acid wash glass,. Stainless Steel butt
36 hinges [125x65x2.5mm. IS1281712] with necessary screws, using branded Smt 13.30 3,944.05
S.S. matt /glossy / platinum finished accessories, Colour / polishing all
bidding parts, and also incl. with all Material, labour, tools, tolerance,
scaffolding etc. complete as per concept /direction and approved by
Architect, and directed by Engineer-In-Charge.
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Providing and fixing window having extruded aluminum Colour anodized
section frame main outer size 95mm x 24mm x 1.17mm @ wt.of
Kg/mt , horizontal Three track member size 92mm x 31.75mm x
1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x
1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size
37 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size Smt 9.90 1,583.95
40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick
transparent bronze colour tinted float glass with powder coated aluminum
fittings and fixtures and transparent silicon sealant glass fixing to frame as
per details etc
Providing and fixing standared extruded of alluminium section of size
63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized
alluminium frame for ventilation with 5 mm thick frosted glass as details etc
38 complete for Ventilation Smt 0.80 1,175.56
Providing & Fixing M.S. grills of required pattern to wooden frames of
windows, RCC or as specified in drawings etc. with M.S. flats at required
spacing & frame around, square or round bars with round headed bolts &
39 nuts or by screws (A) Plain Grill, as per detailed & directed by EIC. Kg 198.00 105.18
Steel work, welded in built up sections framed work including cutting,
hoisting, fixing in position and applying a priming coat of red lead paint.
(A)In beams and joists, channels angles Tees, flats, with connecting plates
40 or angle cleats as in main and cross beams. Hip and jack rafters, purlins Kg 224.00 91.08
conneted to common rafters and the like
Finishing wall with Weather proof exterior emulsion paint on wall surface
(two coats) to give an required shape even shade after thoroughly brushing
the surface to remove all dirt, and remains of loose powdered materials.etc
41 complete. Smt 268.10 117.40
Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of
primer at Wall painting (two coats) with plastic emulsion paint of approved
brand & manufacture on undecorated wall surfaces to give an even shade
42 including thoroughly brushing the surface free from mortar droppings & Smt 266.00 121.64
other foreign matter & sand papered smooth, as per detailed & directed by
Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of
primer at Ceiling painting (Two coats) with plastic emulsion paint of
approved brand and manufacture on undecorated Ceiling surface to give an
43 even shade including thoroughly brushing the surface free from mortar Smt 74.00 127.19
droppings and other foreign matter and sand papered smooth, as per
detailed & directed by EIC.
Painting two coats (including priming coat) on new steel and other metal
surface with enamel paint, brushing, interior to give an even shade including
cleaning the surface an even shade including cleanicn the surface of all dirt,
44 dust and other foreign matter. Smt 31.80 124.75
Providing and fixing roof panel shall be made out of 0.5 mm thick pre
coated GI sheet . The Precoated sheet shall be of minimum 240 mpa steel
grade confirming to IS 14246:1995 and shall have zinc coating of minimum
120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side of the
sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have
plastic protective guard film of minimum 25 microns to avoid scratches
during transportation. The ridge shall be fixed to the steel members by pop
rivet or self drilling/self stitching fastners @ maximum 450 mm c/c along
length of capping/flashing etc complete .
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304
grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia SS
pipe of 16 gauge, round balustrade of 32mm [50mm 16G Grade 304 with
glossy finish consisting of 32 NB or nearest size vertical posts 900 Height at
maximum spacing 900c/c with suitable cups at bottom and top rail of 50 NB
or nearest size & intermediate rails of 16 NB or nearest size etc complete]
with complete assembly of SS studs to house the horizontal 16mm pipes
46 and top handrail, bend and coupler to be used as per architectural detail Rmt 1.30 3,570.75
drawings for the railing in parapet, stair etc. including fabricating, hoisting,
fixing in position with angle cleats, holdfast etc. in RCC or masonry in true
line level and plumb, including complete assembly, including matt polishing
and buffing complete, including scaffolding etc. complete as directed by
EIC.(Actual length of stair railing shall be measured at site & same shall be
paid. No wastage should be measured or paid.)
Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR type
B pipe confirming to IS 13592-1992 with one end plain & other end socket
with rubbering & Fixing conforming to ISI 14735-1999 of approved make
for drain system pipe line, pipe shall be jointed with each other with rubber
lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm
dia x 210mm length x 196mm high at every 2000mm centre to centre or
47 shall be concealed in wall as directed necessary fittings such as bends, Rmt. 9.00 857.65
shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,
cement incl. cost of all material etc. complete as per detailed, directed &
approved by the consultant / EIC.
Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply & 2800 RPM as per
departmental stores with following MOC:
Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410, 7.5Hp 24 m head
Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe (
SCH- 40) for cold water including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of clamp at every two
49 metre C/C or shall be concealed as directed including necessary fittings etc. Rmt. 20.00 280.23
including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (
SCH- 40) for cold water including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of clamp at every two
50 metre C/C or shall be concealed as directed including necessary fittings etc. Rmt. 10.00 72.65
including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (
SCH- 40) for cold water including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of clamp at every two
51 metre C/C or shall be concealed as directed including necessary fittings etc. Rmt. 20.00 91.84
including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (
SCH- 40) for cold water including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of clamp at every two
52 metre C/C or shall be concealed as directed including necessary fittings etc. Rmt. 10.00 148.12
including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (
SCH- 40) for cold water including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of clamp at every two
53 metre C/C or shall be concealed as directed including necessary fittings etc. Rmt. 9.00 195.67
including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Providing & Fixing gun metal check or no return full way wheel valve etc.
complete as per the instruction of EIC. (C) 25 mm. Dia
Providing & Fixing gun metal check or no return full way wheel valve etc.
complete as per the instruction of EIC. (E) 40 mm. Dia
Providing and fixing screw down bib taps of following size.(A) Brass screw
56 down bib tap polished bright. (i) 15mm dia. Each 6.00 214.81
Providing and fixing brass screw down stop tap.(B) 20mm dia.
Providing erecting and fixing double coated ISI water tank of required
capacity each with all necessary fittings and connection etc. complete on
58 terrace Liter 1000.00 3.95
Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm diameter
with 150 mm X 150mm S.S.jali for floor or nahni trap of the following
nominal diameter of self cleansing design with C.I screed down or hinged
59 grating including the cost of cutting & making good the walls, as per Each 4.00 585.37
detailed, directed & approved by the EIC.
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber
and water tight C.I. cover with frame of 300mm x 300mm size (inside) with
60 standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. Each 1.00 1,292.19
Constructing brick masonry chamber for underground C.I. Inspection
chamber & bends with bricks having crushing strength not less than 35Kg.
Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal
dimensions, total weight of cover with frame to be not less than 38Kg. (Wt.
of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-
cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation
61 concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished Each 1.00 2,932.93
smooth with a floating coat of neat cement on walls & bed concrete for (i)
Inside dimensions 455mmx 610mm & 450mm deep for single pipe line.
etc. complete as per detailed, directed & approved by the consultant / EIC.
Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (
cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation
concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )
inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand ) finished
with a floating coat of neat cement & making channels in cement 1:2:4 mix (
1 cement : 2 coarse sand :4 stone aggregate 20mm nominal size ) finished
smooth complete including curing & testing… ( I ) inside 900mm x
mm & 1.5 m deep including R.c.c. cover with frame size 560 mm diameter (
A ) with 230mm thick walls of brick masonry using brick having crushing
strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement : 5 coarse sand ),
(2) B type depth 1.50 Meter for 150mm diameter sewer.. etc. complete as
per detailed, directed & approved by the consultant / EIC.
Providing soak pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal clear
dimention including the cost of excavation, P.C.C. 1:4:8 and filling brickbats
with dry masonry work, Honeycomb masonary work, M:25 RCC. SLab incl.
form work including FE-500 Reinforcemnt, M.S.cover, C.I. Pipe & cowl vent,
63 vatas in C.M. 1:3 with finishing curing etc. complete as directed.. etc. Each 1.00 34,456.15
complete as per detailed, directed & approved by the consultant / EIC.
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe
confirming to IS 13592-1992 with one end plain & other end socket with
rubbering & Fixing conforming to ISI 14735-1999 of approved make for
drain system pipe line, pipe shall be jointed with each other with rubber
lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm
dia x 210mm length x 196mm high at every 2000mm centre to centre or
64 shall be concealed in wall as directed necessary fittings such as bends, Rmt. 10.00 834.38
shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,
cement incl. cost of all material etc. complete as per detailed, directed &
approved by the consultant / EIC. (A) 160mm dia. etc. complete as per
detailed, directed & approved by the consultant / EIC.
Providing & Fixing white colour, Vitreous china, under / Over Counter wash
basin with single hole for pillar type with Cl or MS brackets painted white
including cutting holes, ranking bolts for Fixing & marking good the same,
including Fixing C.P. Brass waste coupling 32mm dia & Bottal trap & 15mm
dia pillar tap, Bottle Trap, as approved, capstan head C.P. screwed down
65 high pressure with screw shank & back nuts & rubber plugs, 15mm dia Each 2.00 2,678.07
brass stop cock (50/75mm p.v.c. Drain connection pipe, Water Connection
Pipe of required Size, & testing the same for leak proof, etc. with all material
& labours to complete this job in all respected manners, etc. complete as
per detailed & approved by the consultant & directed by EIC.
Providing and fixing wash down water closet (European type, W.C. Pan) with
integral P or S trap including jointing the trap with soil pipe in Cement
Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and cover for wash
down water closer with C.P. brass hinges, C.P. brass toilet paper holder, Jet
66 Spray, Metropole flush valve Incl. Connection and rubber buffers. (A) Each 2.00 6,076.82
Vitreous China., etc. complete as per detailed & approved by the consultant
& directed by EIC.
Providing & Fixing C.P. brass towel rail Approved Make complete with C.P.
Brass brackets fixed to wooden plugs with C.P. Brass screws,, etc. complete
as per detailed, directed & approved by the consultant / EIC. (B) 600mm x
67 20 mm size, etc. with all material & labours to complete this job in all Each 2.00 616.42
respected manners, etc. complete as per detailed & approved by the
consultant & directed by EIC.
Providing & Fixing 600mm x 450mm beveled edge mirror of superior glass
mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to wooden
68 plugs with C.P. brass screws & washers, etc. with all material & labours to Each 2.00 851.13
complete this job in all respected manners, etc. complete as per detailed &
approved by the consultant & directed by EIC.
Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A)
69 100mm dia. Each Each 2.00 282.16
Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets,
70 painted white including cutting holes in walls and making good the same Each 1.00 2,326.66
but excluding fittings.
Providing supplying & laying a common two door wadrobe assumed finished
cupboard of size 2.0 m wide x 2.10 m height x 0.6 m deep including all
71 finishing & labour and instructuions given by EIC with all do complete Nos 1.00 14,847.00
Providing and fixing modular kitchen below-counter storage units,
comprising drawers and shutters, made from 18 mm thick BWP/MR grade
plywood for carcass and shutters, with 6 mm plywood backing, finished with
approved laminate on exposed surfaces and internal surfaces, including
72 edge banding, PVC/ABS edge tape, required partitions, shelves, drawer Sqm 2.10 9,997.93
boxes, and all necessary hardware such as soft-close drawer channels,
hinges, handles, screws and fasteners, complete as per approved design,
including fabrication, installation and fixing complete.
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length , in below type of pipe erected with 6A
Modular type switch / bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/Wooden box, single mounting
73 base frame covered with textured/metallic/white front plate modules Pt. 29.00 582.77
erected on / in wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid
PVC pipe and accessories erected concealed in wall/ceiling completeCat. III
For point wiring in bathroom and W/C and washbasin
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)
both are of .ISI marked 1.1 kV Grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected with 6A
Modular type switch and hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of following type erected on
75 PVC / Metallic/Wooden box, single mounting base frame covered with Pt. 5.00 809.01
textured/metallic/white front plate modules erected on / in wall / ceiling as
per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(f)
with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling completeCat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both
are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires
up to 10 mtr length, in below type of pipe erected complete with Modular
type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered
with appropriate front plate modules erected on / in wall / ceiling as per
76 pipe erected with following type of accessories.[I] For 6A Plug and 6 a switch Pt. 8.00 612.06
with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board(f) with
medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete Cat. III
Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin
socket erected on PVC / Metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate modules erected on / in
77 wall / ceiling with following type accessories Cat. III Pt. 6.00 309.06
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured /
metallic/white front plate , modules erected with necessary connections as
78 per site situation directed by Engineer In charge.(9) 16 Amp. SP one way Nos 9.00 180.79
switch Cat.III
(10) 6/16Amp. Universal socket Cat.III
Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper
80 conductor FRLS PVC insulated stranded wire of green colour for earth Mtr. 72.00 104.03
continuity of following size, (A) With medium class Rigid PVC pipe and
accessories (b) 2 wire 2.5 sq. mm
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC
81 insulated stranded wire of green colour for earth continuity of following Mtr. 108.00 140.39
size(A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq.
82 (b) 2 wire 6 sq. mm Mtr. 18.00 184.83
Call bell gong type suitable for 230 volts, 50 Hz. AC supply complete
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
0.5 Watt assembled on single MCPCB, with housing used as a heat sink
shall be made of thick sheet Steel conforming to IS: 513/ CRCA/ aluminium
pressure die cast powder coated and high U.V. & corrosion resistance with
diffuser housed in aluminium casted body with company mark/ name 160V
to 270V, Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85 % ( fitting
84 required LM-79 & LM-80 Certificates) (NOTE: Below description have shown Nos. 24.00 589.84
any wattage capacity between the ranges shown.)(A) Square/ Circular
shaped Surface/Recessed Mount Downlight with provision for spring loaded
mounting clips complete.IP20, (iii) 16-20 watts, Surge-2 kVCat-III
Supplying and erecting led lamps with following wattage capacity of 220 to
240 voltage, minimum 15000 burning hours life, 500 V in built-surge
85 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 Nos. 6.00 112.11
lamp holders, pf >= 0.5, (A) LED Lamps integral type, with PC diffuser
suitable LAMP holder, (ii) 5 to 8 wattsCat-III
Supplying and erecting LED street light / Flood light fittings with High power
White LEDs wattage of 3 Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free High pressure die cast
aluminum housing with smooth finish powder coated and heat sink
extruded aluminium with diffuser and Polycarbonate optics/ lenses, with
toughened glass with company mark/name engraved or embossed 160 to
270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to
86 5700K,Uniformity ratio > 0.45, Luminaire efficacy > 100 lumens/watt . LED Nos. 3.00 4,248.06
driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)
(NOTE: Below description have shown ranges of Wattage capacity of LED
ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and
,Light must have 440VAC line supply with over-voltage protection. (ii) 48 -
59 WattsCat-III
Providing and erecting Miniature circuit breaker single pole 0.5A to 2A
87 system and having breaking capacity 10 KA to be erected in existing box. Nos. 3.00 297.95
confirming to IS 8828/1996 with ISI Mark , Cat-III
Providing and erecting Miniature circuit breaker single pole 6A to 25A
88 suitable to operate on 240 V A.C. system and having breaking capacity 10 Nos. 12.00 123.22
KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark
Providing & erecting 240 V MCB double pole switch for motor & inductive
89 load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in Nos. 3.00 362.59
existing box having following capacity, (B) 40 Amp. Cat-III
Sheets steel powder coated enclosure suitable for incorporating One/Two
Providing and erecting Sheet Steel powder coated MCB distribution board -
flush / surface mounted fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house
91 appropriate nos. of MCBs.(The DBs should be used of same company of Nos. 1.00 1,680.64
MCB to be used) suitable for (A) single phase incoming and horizontal single
phase outgoing, (b) sheet steel double door (IP-43)(v) 16 way
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Providing and erecting Approved make RCCBs conforming to IS: 12640 and
having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase 240 V,50Hz. having characteristic
92 of quick action & tripping with all advance feature & do not incorporate any Nos. 1.00 2,458.34
electronic component. for following Max. rating erected as directed, (ii)
40Amps. DP Cat. III
Providing and erecting Annealed bare Copper wire 4.064mm to 1.626mm.
Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms.
94 dia. galvanised iron pipe with coupling and buch buried in specially Nos. 2.00 368.65
prepared earth pit complete with necessary 8 SWG earth wire.
For using salt and charcoal / coke as required for pipe type earthing.
Supplying & erecting earth pit of minimum bore dia.150mm size approved
make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of
50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having
200-250 Micron galvanising, connection terminal dia of 12mm with
constant ohmic value surrounded by highly conductive compound with high
charge dissipation suitable for following type of applications with chamber
and heavy duty cover. (A)(approved make OEM has to submit test certificate
including value of earth resistance of installation duly stamped and signed
by agency and officer Incharge has to ensure the value of earthing resistane
96 mentioned in test Certificate) & having back filling compound of (B) Inner Nos. 1.00 4,591.46
chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC
62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing compound should be
capable to retain moisture for long time Necessary test report must be
submitted by Agency. (a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable
97 Aluminium conductor for 1.1 kV. to be laid on wall with necessary clamps Mtr. 54.00 112.11
or in existing trench / pipe of following size of cables.(B) 2 core 6 Sq. mm
Providing and, fixing heavy duty flange type brass cable gland with rubber
98 ring for PVC insulated armoured cable complete with out going tails, Nos. 6.00 38.38
insulating tape etc for following size of cables.(B) 2 to 4 core 6 Sq. mm
Solder less crimping type Aluminium lugs conforming to IS suitable for cable
of following size evenly crimped with high pressure tool & connected to
99 switchgear terminals with brass/ cadmium plated nut bolts in an approved Nos. 24.00 6.06
manner. (A) 1.5/ 2.5/4/6 Sq.mm
Providing and erecting Approved make Ceiling fan with double ball bearing
ISI mark with condenser A.C. 230V.50 Hz.1200 mm. sweep complete,
100 canopy erected on existing hook or clamp with earthing. [Make shall be Nos. 5.00 1,596.81
approved by Engineer in charge]
Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe
down rod erected duly painted for fan complete with proper insulation
101 without leakage and earthing. Mtr. 5.00 108.07
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to
the RCC bars up to 50mm length each side and pierced through a 16 Gauge
102 M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with Nos. 5.00 108.07
necessary finishing.
Supplying & erecting approved make low noise decorative exhaust fan
103 having square frame ABS body with inbuilt lowers & square frame.250mm Nos. 2.00 1,703.87
with 1350 RPM Cat.II
Schedule B
Sr. Qty. May Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. More Or Less Rate In FIghure
Supplying & erecting approved make SMC press moulded composite FRP.
loop-in, loop-out approx. 2mm thick box complete with Bakelite connector
strip 5way (3P+N+E), DIN rail for mounting mob & hinged doors as per
104 requirement having locking arrangements with mounting clamp with nuts, Nos. 3.00 476.72
bolts & washers suitable for erection on pole with cable clamps& earth bolt
of following size of box.(C)150mm x 125mm x 100mm [deep]
Supplying and erecting B class galvanised iron pipe 32 mm outside dia
cm long duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate,
105 erected on wall or corner for mounting street light luminaire with necessary Nos. 3.00 343.40
hardware materials duly painted.
Total Amount Rs. =
Total Amount Rs. =
I/We am/are willing to carry out the work @............ % above/below percent ( should be written in
Estimated amount put to tender Estimated amount put to tender
Deduct:……………………...….% below Add……………………..……..% above
IN words IN words
(Please strike out whichever is not applicable.)
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there
is a change as per actual mix design the cost of difference of cement consumption have been deducted from the
rate of original item at the rate of input rate mentioned in all the tender.
Signature of Contractor with Seal Signature of Contracting Authority with Seal
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
0.0 VANSDA SBD RFO QUARTER.pdf
1.0 SCHEDULE-B RFO QUARTER VANSDA.pdf
2.0 SPECIFICATION INDEX VANSDA.pdf
3.0 DETAILED SPECIFICATION CIVIL.pdf
3.1 General Technical Specifications.pdf
3.2 R and B Specifications Booklet Electrical.pdf
4.0 LIST OF APPROVED MAKE LIST CIVIL.pdf
4.1 LIST OF APPROVED MAKE ELECTRICAL.pdf
4.2 PLUMBING MAKE LIST.pdf
RFO QUARTER ARCH DRAWING VANSDA.pdf
RFO QUARTER STRUCTURAL LAYOUT VANSDA.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .