Annual maintenance on choli to laamu road KM 0/00 to 3/00 Under AMP for the Year 2026-27 village Road Providing and Laying 30 mm tick bitumen concrete in KM 0/00 to 2/00 to 3/00 to 4/00

Providing laying, spreading and compacting stone aggregate size 53mm to 22.4mm (fifty three millimeter to twenty int four millimeter) Grading- size [75mm seventy five milimeters) compacted thickness) to water bound macadem specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (ent Hundred) K.N. static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of sor 11.2mm (eleven point two milimetres) nominal size at the rate of 0.18cum (zero point eighteen) cubic metres per 20 Sam per ten square metres) and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per technical specifications clause No. 405 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.225 kgs (Zero decimal Two two Five kilogramme) per square metre on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification section 500 as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate as including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying bituminous concrete with 100-120 (One hundred-one hundred twenty) TPH batch type hot mix plant producing an averege output of 75 (seventy five) tonnes per hour using crushed aggregate of specified grading premix with bituminous binder at the ratre of 5.5 (five decimal five) percent of mix and filler, transporting the hot mix to work site, laying with ahydrostatic paver finisher with sensor control to the required grade, ievel and alignment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORTH specification claus No 509 complete in all respect and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST

Providing and laying of hot applied thermoplastic compound 2.5 mm (two decimal five mullimetre) thick including reflectorising beads 250 gms (two hundrede fifty grams) per squre metre area thickness of 2.5 mm (two point five millimetre) exclusive of surface applied glass beads as per IRC 35 The finished surface to be level, uniform and free from streaks and hole complete in all respect and as per duection of Engineer-m-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, froyalrs. Malkana, tell tax. GST or any other taxes imposed by the Government