REPAIRS TO KITCHEN, TOILET, BATHRROOM, ROOF, CEILLING, AND FLOOTRING IN CERTAIN MD ACCN AT DEFENCE COLONY AREA UNDER GE MISSAMARI

Amount

Dismantling plain or corrugated steel sheeting any thickness in roof covering.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified incl dismantling of old steel sheets of any description.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified incl dismantling of old steel sheets of any description.

Dismantlinig wrought iron or mild steel work of any description not otherwise provided for.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165

Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.

Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl plastering 10 mm thick in CM 1:4 .

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

S&F for Anodised aluminium/ GI snap grid power coated framed work of size 605x605 mm for false ceiling all as specified with hangers 4mm thick GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and as directed.

M & L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to GI/Aluminium framework with screws fixed in ceiling flat or sloping as specified and directed.

Taking down shutter of any description exc 1 sqm and n exc 2 sqm each and refixing in the same opening complete all as specified and directed.

Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc.

M&L for brushing neat cement slurry with 03 Kg of cement per Sqm.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 . (Internal water proof compound measured seperately)

M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top:- (i) Applying one coat of cold bituminous primer 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces. (ii) APP based polymeric membrane 3mm thick, minimum weighing 3.5 Kg/sqm, reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction and sealing the joints with application of cold bitumen. (iii) Applying two coats of aluminum paint over the APP membrance .

M&L for providing cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded of chamfered on edges.

M&L two coat Damp proof paint in wall.ceiling for arresting leakage and seepage complete all as specified and directed by Engr-in-Charge , and as per manufacturer instructions including preparation of surface. Make - Asian Paints, Dr fixit, Berger, Sika or equivalent.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame)

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames)

S&F powder coated anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified (minimum thickness of poweder coating 50 micron).

S&F for powder coated anodised window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified (thick ness of powder coating not less than 50 micron).

S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane.

S & F 4 mm thick frosted glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane.

M&L in repair for 12 mm thick pre laminated particle board, interior grade prelaminated one side with decorative choice lamination &other side balancing white lamination fixed in screws to timber frame work.

S&F for aluminium wire cloth with 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification & as directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed.

S&F Pressed steel frames for door with one or more rebates including necessary fixing lugs hinges, lock, strike plate etc.complete for frame of size-125x60mm.

S&F Pressed steel frames for door with one or more rebates including necessary fixing lugs hinges, lock, strike plate etc.complete for frame of size-105x60mm.

M&L for PCC 1:3:6 type C-0 in filling of pressed frame.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.

S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.

S&F in repair stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed withstainless steel wire stapple complete all as specified and directed.

S&F aluminium alloy 250mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed.

S & F 75 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type C-21.

S & F 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type C-21.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section.

S&F in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified.

Taking down rain water pipes inculding all fittings any size and pattern.

S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls.

S & F 75 mm bore PVC (SWR) bends of any radius.

S&F 15mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor including dismantling of old tube.

S&F 20mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor including dismantling of old tube.

S&F 25mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor including dismantling of old tube.

S&F in repairs 15 mm bore, chromium plated fancy type, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repairs 15 mm bore chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified.

S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level slimline or equivalent make / model with all accessories.

M&L 75 mm bore PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L 75 mm bore for PVC (SWR) multi floor trap with grating including jointing with solvent cement

Supply & Fix in repairs Wash down water closet (Pedestal pattern), incl Plastic water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand, including x 32 mm dia., Waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed incl 32mm dia PVC waste pipe complete all as specified and directed.

S&F in repairs Vitreous China squatting pan "Orissa" patern size 580x440mm white with integral foot rest (Excluding flushing cistern & flush pipe).

PVC connection 15 mm bore 450 mm long.

S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges.

S&F in repairs Brass chromium plated shower rose 125mm size.

M&L for 100 mm thick cement concrete type D-2 (1:2:4) using 20 mm graded stone aggregate as in path/hardstanding complete all as specified incl demolition of old cement concrete of any description.

Dismantling PVC/RCC water tank and removing to store exc 500 & not exc 1000 ltrs.

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed.

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth without using extra cement.

Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedeed and pointed in any morter etc.

S&F for 20 mm thick Granite of any type cut beded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in vertical surfaces of wall incl 10 MM thick rendering in CM 1:4 Including complete all as specified and directed.

S&F for 20mm thick Granite of any type cut beded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 MM thick bed 1:6 CM in floors.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floors. NOTE: Water proofing compound will be measured separately.

M&L applying one coat of NITTO proof to sides and bottom of floors to sunken floors.

M & L for plain cement concrete Type E2 1:5:10 (using 40mm graded stone aggregate) in foundations, filling and mass concrete.

M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed.

M&L for preparation of old decorated plastered wall surface applying One coat of oil bound distemper on wall all as specified and directed.

M&L applying a coat of 1mm thick wall care putty over plaster surface to prepare the surface even and smooth as per manufacture instruction complete all as specified and as directed.

Preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint, over a coat of red oxide, zink chrome.

Preparation of new or previously untreated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint over one coat of pink primer.

S&F in repair sink made of stainless steel 1 mm thick for kitchen with plug waste pipe washer includind cantiliver cast iron brackets conntecting union etc overall size 495 mm X 420 mm with bowl size 410 mm X 330 mm X160 mm.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.

S&F in repair kitchen plate rack made of stainless steel sheet not less than 0.63 mm thick of over all size 1050 x 750 x 250 mm complete all as specified and as directed.

Supply & Fix in repairs Vitreous EWC Wash down water closet (Pedestal Pattern)white with includig 'P' or 'S' traps.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door.

S & F 110 mm bore PVC (SWR) Vent Cowl.

S & F 50 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm.

Supply & fix in repairs 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store.

Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store.

Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F in repairs 15mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S & F in repairs 15 mm bore chromium plated two way bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union.

Supplying and fixing in frame at site, factory made solid panel pvc moulded door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges and fixed.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium staple complete all as specified and directed.

M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cement mortar (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement.

Supply only Integral water proofing compound

M&L rendering 5mm thick of cement plaster (1:3) on concrete surfaces of ceiling finished even and smooth(without using extra cement).

M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty.

Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty.

M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty.

Preparing new surfaces of ceilings and applying two coats of white wash.

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete.

SNEH CORPORATION (BID ID -3380531)

DHEERAJ CONSTRUCTION (BID ID -3384839)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3377551)

M/S DB TRADING CO (BID ID -3377541)

Markson (BID ID -3384684)

M/S RANA ENGINEERING ENTERPRISE (BID ID -3383092)