Kerala

Active

Works

Civil Works - Buildings

Annual Plan-Kokkayar GP 112/26 Maintanance of Kanakapuram Angan vadi (RETENDER)

Local Self Government Department

KOKKAYAR GP | Kottayam, Kerala

Amount: Refer DocsCloses: 14 Oct 20262d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published5 Oct 2026
Closes14 Oct 2026
Bid Opening16 Oct 2026

Tender Value

Refer Docs

Closing Date

14 Oct 2026, 12:00 pm2d left

Tender Inviting Organisation

Name

Address

KOKKAYAR GP AE SECTION

Work Description

Annual Plan-Kokkayar GP 112/26 Maintanance of Kanakapuram Angan vadi (RETENDER)

Tender Information

Tender ID

2026_LSGD_876152_1

Reference Number

22/AE/LIDANDEW/KKR2026-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

KOKKAYAR GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredPRELIMINARY AGREEMENT (.pdf)

RequiredE - PAYMENT FORM (.pdf)

RequiredPACT CERTIFICATE (.pdf)

RequiredAFFIDAVIT (.pdf)

RequiredFORM OF TENDER (.pdf)

Fee & Financial Details

Tender Fee Amount

₹335

Tender Fee Exemption Allowed

Yes

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

5 Oct 2026

Published

5 Oct 2026

Bid Opening

16 Oct 2026

Download Starts

5 Oct 2026

Download Ends

14 Oct 2026

Submission Starts

5 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (6 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Roofing
1.001	50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood	0.07	cum	-	-
1.002	50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood	3.04	sqm	-	-
1.003	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	0.89	kg	-	-
1.004	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	0.42	sqm	-	-
1.005	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	53	kilogram	-	-
1.006	OD483291/2025-2026:Providing and fixing precoated galvanised iron profile sheet(CE OBSERVED DATA)(size,shape and pitch of corrugation as approved by Engineer-in-charge)0.35 mm(+0.05%),total coatedthicknesswith zinkcoating 120gramsper sqmas per IS:277,in 240 mpa steel grade ,5-7 micronsepoxy primer on both side of the sheet and polyester top coat15-18 microns.Sheet should have protective guard filmof 25 microns minimum to avoid scratches during transportationand should be supplied in single length upto 12 metreor as desiredby Engineer - in- charge.The sheet shall be fixed using self drilling / self tapping screws of size(5.55X55 mm)with EPDM seal complete upto any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required	12	sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.22 MB

Work Item Documents

FFT.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Roofing
1.001	50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood	0.07	cum	-	-
1.002	50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood	3.04	sqm	-	-
1.003	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	0.89	kg	-	-
1.004	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	0.42	sqm	-	-
1.005	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	53	kilogram	-	-
1.006	OD483291/2025-2026:Providing and fixing precoated galvanised iron profile sheet(CE OBSERVED DATA)(size,shape and pitch of corrugation as approved by Engineer-in-charge)0.35 mm(+0.05%),total coatedthicknesswith zinkcoating 120gramsper sqmas per IS:277,in 240 mpa steel grade ,5-7 micronsepoxy primer on both side of the sheet and polyester top coat15-18 microns.Sheet should have protective guard filmof 25 microns minimum to avoid scratches during transportationand should be supplied in single length upto 12 metreor as desiredby Engineer - in- charge.The sheet shall be fixed using self drilling / self tapping screws of size(5.55X55 mm)with EPDM seal complete upto any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required	12	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Roofing

1.001

50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

0.07

cum

1.002

50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood

3.04

sqm

1.003

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

0.89

1.004

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

0.42

sqm

1.005

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

kilogram

1.006

OD483291/2025-2026:Providing and fixing precoated galvanised iron profile sheet(CE OBSERVED DATA)(size,shape and pitch of corrugation as approved by Engineer-in-charge)0.35 mm(+0.05%),total coatedthicknesswith zinkcoating 120gramsper sqmas per IS:277,in 240 mpa steel grade ,5-7 micronsepoxy primer on both side of the sheet and polyester top coat15-18 microns.Sheet should have protective guard filmof 25 microns minimum to avoid scratches during transportationand should be supplied in single length upto 12 metreor as desiredby Engineer - in- charge.The sheet shall be fixed using self drilling / self tapping screws of size(5.55X55 mm)with EPDM seal complete upto any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required

sqm