Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance NAYA BASS MAHAMANDIR JODHPUR RAJASTHAN 342006 | JODHPUR | JODHPUR | RAJASTHAN | 342006 | Admitted-Finance |
| 2 | Admitted-Finance SHOP NO 13 MOHINI MARKET KISHORE BAGH MANDORE JODHPUR RAJ | JODHPUR | RAJASTHAN | 342001 | Admitted-Finance |
| 3 | Admitted-Finance H 10 KARNI NAGAR NEW NAGAUR ROAD NEAR MANDORE POLICE STATION 8TH MILL MANDORE JODHPUR 342304 | JODHPUR | JODHPUR | RAJASTHAN | 342304 | Admitted-Finance |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
9 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) R AND D JODHPUR
AGE (I) R AND D DEFENCE LAB JODHPUR
REPAIR/MAINT AND REPLACEMENT OF HT OH LINE/ HT UG CABLES AT DEFENCE LAB JODHPUR
2023_MES_580951_1
8524/E8
Open Tender
Electrical and Maintenance Works
Item Rate
AGE (I) R AND D JODHPUR
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
AGE (I) R AND D JODHPUR
₹19,000
Yes
21 Mar 2023
14 Feb 2023
11 Mar 2023
14 Feb 2023
9 Mar 2023
23 Feb 2023
15 Feb 2023 - 22 Feb 2023
Amount
M&L Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc including taking out old un-serviceable earthing, complete all as directed by Engineer-in-charge. Note: (i) The concrete pit shall be PCC 1:3:6 type C-1, 40mm thick pre-cast cover slab of RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate, reinforced with 8mm TMT bars @ 10 cm c/c on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No. 3 of MES SSR Part-I., (ii) Item includes the cost of GI pipe up to 7.5m for protection of earth strip and 32X6 mm GI strip up to 7.50 m length (iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.
Ditto but using copper plate 60cm x 60cm x 3.15mm thick elctrode and 20 x 3 mm copper strip as earthing lead complete all as specified and directed by Engineer-in-charge.
Disconnecting ,taking out old unserviceable HT under ground cable of size 3 core 95 to 120 Sq. mm. from the trenches / floor / along the pole including recoiling at site of work complete all as directed by Engineer- in-Charge.
M&L XLPE insulated/,screened,PVC bedded,galvanised steel strip or wire armoured heavy duty elelctric cable with aluminium stranded conductor 11000 volts (tearthed) / graded cross sedction area 95 sqmm 3 core complete all as specified and directed by Engineer-in-charge.
M&L XLPE insulated/,screened,PVC bedded,galvanised steel strip or wire armoured heavy duty elelctric cable with aluminium stranded conductor 11000 volts (tearthed) / graded cross sedction area 120 sqmm 3 core complete all as specified and directed by Engineer-in-charge.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes,taking out cable, etc not exceeding 10 sqm on plan and getting out in any type soil complete all as specified & directed by Engineer-in-Charge.
M&L sand cushioning to PVC cable with tibba sand and punning to provide required cover complete all as directed by Engineer-in-Charge. (Note :- For the purpose of payment only punned thickness will be measured).
Supply & laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and n. exc 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified & directed by Engineer-in-charge.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any soil complete all as specified & directed by Engineer-in-Charge.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.
Dismantling old Stay Assembly complete with Accessories as show in Electrical Plate No. 1 of MES SSR Part 1 specificationI, diameter of Stay Rod 20mm complete all as specified and as directed by Engineer-in-charge.
M&L Stay Assembly complete with Accessories as show in Electrical Plate No. 1 of MES SSR Part 1 specificationI, diameter of Stay Rod 20mm complete all as specified and as directed by Engineer-in-charge.
M&L Re-stringing & tightening of stay assembly wire complete all as specified and as directed by Engineer-in-charge.
Dismantling old unserviceable Cradles, hexagonal / rectangular fabricated with galvanised steel wire complete all as specified and as directed by Engineer-in-charge.
M&L Cradles, Hexagonal / Rectangular fabricated with 3.15/4.0mm dia galvanised steel wire complete all as specified and as directed. By Engineer-in-charge.
Dismantling Old unserviceable Lightning Arresters with all fittings of any description, complete all as specified and as directed by Engineer-in-charge.
M&L Lightning arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 KA , 33000V grade all as specified and directed by Engineer-in- charge.
Dismantling old unseviceable Pin/Disc type insulators with all fittings of any description,Discharge capacity and size, complete all as specified and as directed by Engineer-in-charge.
M&L pin type,porcelain,vitreous,white,brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut suitable for 33000 Volt Grade, complete all as specified and as directed by Engineer-in-charge.
M&L Disc type insulator, porcelain, vitreous,socket type white, brown or green, ‘three-in-series assembly’ for tension with tension clamps for conductors, working pressure suitable for 33000 Volt, complete all as specified and as directed by Engineer-in-charge.
M&L sperading crushed stone aggragate of Gauge 40 to 63 mm,in complete yard area around four pole strecture,transformer,GOD etc after removing exiting earth layer of 50mm thickness and removing all grass etc and leveling of ground and spread sand and leveling in layers not exc. 150mm thick, complete all as specified and as directed by engineer-in-charge.
M&L Replacement of all UNSV jumpers,greasing,changing of U clips of horizontal/vertical, fizzi clamps, brass clamps at any 33 KV HT pole including stringing,streaching & binding with insulator existing serviceable aluminium conductor steel reinforced (ACSR) on pole ,stringing properly on insulators and binding with aluminium binding wires,etc complete for any size (Mink,Dog ,ferret, Weasel , Squirel of conductor) complete all as specified and directed by Engineer-in-charge . Note:-The rates deemed to include trimming of tree branches up to two meter distance form line conductor on either span of HT pole & cleaning of ground.
M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in anyshape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified.
M & L for HT Danger notice plate of size 300 x 300 mm with the use of ACP sheet vitreous white,with letters ,figures and conventional skull and bones in single red colour and fixed with M.S. clamps,bolts and nuts of approved size complete all as specified and directed by Engineer-in-charge.
M&L cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of 95 sqmm, complete all as specified and as directed by Engineer-in-charge.
M&L cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of 120 sqmm complete all as specified and as directed by Engineer-in-charge.
M&L cable jointing kit for 33 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of 300 sqmm, complete all as specified and as directed by Engineer-in-charge.
M&L for Prestressed concrete pole, 11.0 metres long. 152mm x 152mm at top and 152mm x 260 mm at bottom, class 9 complete all as specified and directed by Engineer-in-charge.
Dismantling Air Break Gang operated switches,Vertical/Horizontal Mounted including insulators and operating mechanism for repair/replacement of broken/worn out component and insulators or carrying to MES store or credited to contractor, complete all as specified and as directed by Engineer-in-charge.
M&L Switch Air Break, Gang operated, Triple Pole, Mechanically Operated, mounted on Insulators and Steel Frame with Operating Mechanism worked from ground level,current rating upto 400 Amps complete all as specified and as directed by Engineer-in-charge.
Dismantling old unsv Drop out fuse set switches of any current rating and any volts complete all as specified and as directed by Engineer-in-charge.
M&L for Drop out fuse set switches mounted on insulator for 11000 volts complete all as specified and directed by Engineer-in-charge.
Shifting of HT VCB from one place to MRS with the help of suitable arrangement for lifting and transport and complete all connections including opening of duct for cabling at site for the functioning/running of HT VCB complete all as specified.
Dismantling of Old unsv Over Head conductor of any type including all other connected accessories mounted on pole and deposit to all items in MES store all as specified. Note :- 3 Run of conductor from one Pole to another Pole measured as single lenght of metre.
Dismantling of Old Unsv GI/RCC Pole of any lenght and deposited GI Pole to MES Store and RCC pole wastage can be throw out from Defence Lab premises in a suitable place with the help of its own vehicle arrangement complete all as specified.
Shri Electrical Enterprises
Sachiyay maa Electricals
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .