REPAIR _ RE_CANNING POLISHING TO WOODEN FURNITURE AND UPHOLSTERING OF SOFA SETS AT VARIOUS LOCATIONS OF OKHA AND PORBANDAR UNDER GE NAVY PORBANDAR

Amount

WOODEN FURNITURE

Repairs to Bed hard with Plywood Top FD-246/247

Removing U/S plywood from Bed hard & supply & fix new plywood of size 6'.3"x3' of 12 mm thick ply BWR Gde of Make KITPLY / CENTURYPLY / ARCHIDPLY as shown in drg complete all as specified and directed.

Removing of U/s legs supply and fix new legs of size 50 x 50 mm at top and 30 x 30 mm at bottom of Ist class Hard wood (Teakwood) of shape and size all as per drg complete all as specified and directed.

Removing the u/s long rails supply and fix new long rail of size 1980 x 100 x 40 mm of Ist class Hard wood complete all as specified and directed.

Removing the u/s Short rails supply and fix new long rail of size 900 x 100 x 40 mm of Ist class Hard wood complete all as specified and directed.

S&F 4 mm thick veneered phenol bonded ply wood one side teak face on both sides of head rest of the bed and provision of 4 mm thick teak wood beading all round all as per drg complete all as specified and directed.

Repairs to Table bed side FD/E6/MAP/15(R)

Removing U/S top and S&F new top made of 19mm thick pre laminated particle board of BWR gde confirming to IS:303 (One side choice and other side balancing white laminated of size as per drawing and as per existing), with 6mm thick teak wood lipping all as shown in drg and directed by Engr-in- Charge.

Removing of U/s handle and S&F new handle 100mm long powder coated non ferrous metal alloy all as per drg and as specified.

Removing the u/s Telescopic Channel &S&F new Telescopic Channels duly powder coated 250 mm and 1.6mm thick. (both channel to be replaced)

Repairs to Chair dining JCOs/OR FD-279, 228

Removing the following U/S components chair dining and providing new components of size and shape shown in Drg Polishing all exposed parts of chair dining after repairs / replacement of Parts.:- FD/MAP/II/-05

Rear leg made of size 30x55x890mm IInd class Hard wood

Front leg made of size 30 x 55 x 460 mm IInd class Hard wood

Stiffener made out of 20 x 25 x 440 mm 2nd class Hardwood

Seat stiffener duly holed for canning made out of IInd class Hardwood of size 440x65x30mm

S&F of PVC Shoe

Removing of UNSV /Broken PVC seat of chair dining JCO/Ors and providing new seat 4mm thick with 4x10mm thick Ribs moulded alongwith seat in single piece & screwed with frame all as specified in drg and as directed by Engr-in charge. Make AMKO

S&F of supporter under PVC seat made of size 30 x 65 x 356 mm 2nd class Hardwood all as specified by Engr-in-Charge.

Repairs to Chair dining offrs FD/MAP/II/04

Removing the following U/S components chair dining and providing new components of size and shape shown in Drg Polishing all exposed parts of chair dining after repairs / replacement of Parts.:-

Rear leg made of size 35x50x 950 mm IInd class Hard wood

Front leg made of size 35 x 50 x 450 mm IInd class Hard wood

Stiffener made out of 20 x 25 x 440 mm 2nd class Hardwood

S&F of PVC Shoe

Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth. Cost of tapestry cloth should be not less than Rs 250 per meter size of cushion 450x450x75mm thick

Removing of old existing cushion's and replacing with new cushions of size 450x450x75mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified.

Repairs to chair writing: FD - 280 Removing the following unserviceable components of chair writing and providing new components of size and shape complete all as specified and as shown in drawing.

Rear leg made of Ist class Hard wood of size 890x55x30mm

Front leg made of Ist class Hard wood of size 675x55x30mm

Stiffener made of Ist class Hardwood of size 535x65x30mm

Arm rest made of Ist class Hardwood of size 500x60x25mm

Repairs to Chair Easy FD-229 ,201,17 Removing the following U/S components chair easy and providing new components of size and shape shown in Drg, including French polishing the components with matching finish, complete all as specified and as shown in drawing .

Rear leg made out of 50 x25 x 890mm size Ist class Hard wood.

Front leg made of size 50x25 x 545 mm Ist class Hard wood.

Batten rail under seat frame made out of 50 x 25 mm Ist class Hard wood

Hand rest / arm rest made out of 610x65x25 mm Ist class Hard wood all as specified

Re-caning of Wooden Chairs and Chair Verandah:

Re Canning of chairs except chair verandah. Taking down existing u/s old cane from chairs and other furniture like stool dressing, bin soiled linen etc. Cleaning to cane holes. Supply and fix new plastic cane of 2 mm wide, 0.5 mm thick, 1/2 round, approved quality of "GODREJ PATTERN" using minimum weight of cane mentioned in drg and 4 mm wide 1/2 round cane to be used as border al around all as shown in drg. (FD-280, 279, 229, 75(M), 244, 252)

Taking down unserviceable plastic cane or nylon newar from chair verandah by supply and fix new plastic cane of 4 mm wide 0.5 mm thick white colour half round. Weaving shall be matt pattern complete all as specified and as directed by Engineer - in - Charge. (FD-256, FD-359)

Repairs to Teapoy, 600 mm X 450 mm X 540 mm FD– 382, 278 Removing the following U/S components of Teapoy and providing new components of size and shape shown in Drg and polishing all exposed parts of Teapoy after repairs / replacement of parts.

New Table top shall be PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade, lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Legs made of Ist class Hard wood

Top batten stiffener short made of Ist class Hard wood

Top batten stiffener long made of Ist class Hard wood

Repairs to PEG TABLE FD-277, FD-384 Removing the following existing U/s components of table Peg and providing new components of size and shape shown in including French polishing hard wood components with matching finish, complete all as specified and as shown in drawing .

New Table top shall be PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade, lamination both side (teak Shade and balancing white) extended minimum 50mm beyond the bottom edge fixed in position all as specified and directed.

Legs made of Ist class Hard wood

Repairs to Table centre (size 900x450mm) FD-274 Removing the following existing U/S components of Table centre and providing new components of size and shape shown in Drg and polishing all exposed parts of Table centre after repairs / replacement of parts.

Removing of U/S Top and S&F New Table top shall be PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade, lamination (teak Shade) extended minimum 50mm beyond the bottom edge fixed in position all as specified and directed.

Legs made of Ist class Hard wood

Top batten stiffener short made of Ist class Hard wood

Top batten stiffener long made of Ist class Hard wood

Repairs to table dining 6/8 persons FD - 239,273,376, 165

Removing of U/S Top and S&F New Table top shall be PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade, lamination (teak Shade) extended minimum 50mm beyond the bottom edge fixed in position all as specified and directed. Size 1500x900mm

New Table top shall be PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade, lamination (teak Shade) extended minimum 50mm beyond the bottom edge fixed in position all as specified and directed. Size 1800x900mm

Removing the u/s legs supply and fix new legs of size 60 x 60 x 750 mm of 1st class Hard wood (Teakwood)

Repairs to table dining 4 persons FD/MAP-II/03

Removing the US table top supply and fix new top of size 1200x900mm of 18 mm thick pre laminated particle board top one side natural Teak face of Make:ARCHIDPLY/ASSOCIATE/ECOBOARD duly provided with 4 mm thick teak wood edging all around

Removing the u/s legs supply and fix new legs of size 60 x 60 x 750 mm of 1st class Hard wood (Teakwood)

Repairs to table writing FD - 275, 249 S & F of following u/s components and polishing after repairs.

New Table top shall be PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade, lamination (teak Shade of size as per drawing and as per existing) extended minimum 50mm beyond the bottom edge fixed in position all as specified and directed.

Removing u/s legs , supply and fix new legs of 1st class Hard wood as per existing pattern

Removing u/s drawer and replacing with new drawer made with 12 mm plywood BWR Gde as per existing pattern

Replacement of doors with 18 mm pre -laminated board on one side nature Teak face of Make ARCHIDPLY/ASSOCIATE/ECOBOARD with 4 mm thick teak wood beading and piano hinges screwed and new knob all as shown in drg

Upholstering of Sofa Set Five Seater/Sofa Chairs FD-281, 373,258

Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth duly provided by Zip. Cost of tapestry cloth should be not less than Rs 250 per meter size of cushion 560x520x100mm thick.

Replacement of old cushions of Sofa Set Five Seater/Sofa Chairs with newones FD-281, 373,258

Removing of old existing cushion's and replacing with new cushions of size 560 x 520x100mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified.

Repairs to Table 900 x 600 mm with drawers and with outdrawers FD -283, 284

Removing broken legs and replacing with new legs made out of Ist class Hard wood of size 740x50x55mm and as specified in Drg.

New Table top shall be PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade, lamination (teak Shade) extended minimum 50mm beyond the bottom edge fixed in position all as specified and directed.

Removing broken drawer from table with drawers and replaced new drawer made of Ist class Hard wood and fixed with 6 mm ply wood bottom BWR grade of Make KITPLY/CENTURYPLY/ARCHIDPLY all as per drg

Repairs to TABLE DRESSING GENTS FD/E6/MAP/16 M&L after removing the existing U/s parts from Table dressing Gents, repairing including S&F new parts of Table dressing gents and all as specified and shown in Drg and directed by Engr-in-charge.

Mirror shall be of 5.5 mm thick, Backed by 12 mm thick BWR Gde plywood as per IS:303, covered by decorative mould.

Removing broken /UNSV glass shelves S &F new Glass shelves of 8mm thick all as per drg.

Removing broken /UNSV glass holder S &F new Glass holder all as per drg.

Removing broken / UNSV Magnet Catch S& F new magnet catch all as specified and shown in Drg.

Repairs to TABLE DRESSING LADIES WITH STOOL FD/MAP-II/07 M&L after removing the existing U/s parts from Table dressing ladies repairing including S&F new parts of Table dressing ladies and all as specified and shown in Drg and directed by Engr-in-charge.

Mirror shall be of 6 mm thick, Make 'MODIGUARD' duly Teak wood 6 mm thick frame and 6 mm thick plywood BWR commercial 6 mm thick on back side of the frame

Top 18 mm thick pre laminated particle board one side Teak finish and one side veneered of Make Action Tesa with 4mm thick Teak wood edging around.

Removing broken handle, S&F new handle shall be used of 100mm long chromium plated

Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth duly provided by Zip. Cost of tapestry cloth should be not less than Rs 350 per meter size of cushion 440x350x75mm thick

Removing of old existing cushion's and replacing with new cushions of size 440 x 350x75mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified.

French polishing to Following wooden furniture as under :- Note:- (i) Rate includes for Material and Labour for scrapping the existing polished surface with proper/suitable sand paper, filling up the cavities and holes with proper wax or filler to make surface even and smooth, preparation of surface and applying French polish to the following items complete all as specified and as directed. (ii) Work will be executed in BSO's store Accn as well as where the furniture exists in different user unit in OTM/Md Accn of Navy at Porbandar & Okha under the jurisdiction of GE Navy Porbandar.

Bed hard (FD - 246, 21(M))

Board notice of various sizes (FD-1 (M),99(M),117(M))

Chair easy with cushioned (FD - 358)

Chair dining Offers (FD/E6/MAP/10(R))

Chair easy (FD - 17(M), 229)

Chair dining (FD – 16,228,279)

Chair writing (FD - 20(M), 280)

Chair WB without arms (FD -56(M), 225)

Dressing Mirror Gents (FD/E6/MAP/16)

Hat stand with mirror (FD - 233, 362)

Peg table (FD - 25(M), 236, 384)

Rack rifle double 30 rifle (TD-1007)

Rack rifle double 20 rifle (TD-1007)

Rack rifle double 15 rifle (TD-1007)

Rack for 05 rifle (TD-1007)

Sofa chairs (Single) (FD - 373)

Sofa set 4 seater (FD - 373,281, 258)

Sofa set 5 seater (FD - 373,281, 258)

Stool Dressing (FD-252)

Stool wooden 2'high (TP)

Table dressing Ladies (FD - 378, 32(M))

Table dining 6 persons (FD - 30(M), FD - 273)

Table dining 8 persons (FD - 30(M),273, 376)

Table centre (FD - 29(M), 274)

Table writing (FD-33(M), 249, 275)

Table 3'x2' w/o drawer (FD-42(M),FD-284)

Table 3'x2' with drawer (FD-41(M), FD-283)

Teapoy (FD - 278, 232)

Table dressing Gents (FD - 31(M) 379)

Table bed side (FD - 248, 28(M))

Workbench of sizes (FD-145(M), 301)

SMS Enterprises

K K Construction Co

K B N TRADERS

roxy enterprise