SPECIAL REPAIR TO BLDG NO NP-04 AND 05 (TOILET BLOCK) NEAR DS-5 KL AT GRRC UNDER AGE (I) LANSDOWNE

Amount

Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for cement concrete type D-2 1:4:8 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M & L 100mm thick cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) as in path/hardstanding complete all as specified and directed.

M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and directed.

M&L for Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR walling uncoursed or brought upto courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm for lime or sand stone complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M & L for 20mm thick in CM 1:6 screed bed or bedding layer for laying floor finishes complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed by Engr-in-Charge.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 as a backing coat for dado /skirting complete all as specified and directed.

M & L for coloured glazed tiles in vertical surface of size (350mm x 250mm x 7mm/ 450mmx 350mm x 7mm) thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed.

M & L for cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) 75mm thick as in plinth protection complete all as specified and directed.

Taking up or down steel tubing 15mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mmdia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

S & F for Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed.

S & F for GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed.

Taking down cement plaster, any desription on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Material & labour for Rendering 15 mm thick in CM 1:4 on brick/stone or concrete surfaces finish even & smooth without using extra cement complete all as specified and directed.

Material & Labour for Rendering 15 mm thick in CM 1:6 on brick/stone or concrete surfaces finish even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered or unplastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed.

M & L for preparing of newly plastered or un plastered surface of walls and applying two coats of white wash complete all as specified and directed.

M & L preparing of old plastered or un plastered surface of walls and applying two coats of Cement base paint complete all as specified and directed.

M & L preparing of old plastered or un plastered surface of walls and applying two coats of white wash complete all as specified and directed.

S & F in rep Stop valves 15mm dia Fancy type chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Taking down Chowkats or frames incl. shutters (without taking of shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.

S&F for Factory made moulded solid PVC panelled door shutter 30mmthick (Style) consiting of frame made out of MS tubes for top & bottom rails ,MS frame shallbe covered withheat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and palin colour PVC sheet for Toprail : panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealedto the style and rail withsuitable PVC sheet beading and jointed toghether with solvent cement etc fixed with frame at site complete

S&F for 100 mm long stainless steel Butt hinges with stainless steel hinge pin ISI marked complete all as specified and directed .

S&F for 150 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed

S & F for 150 mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed

Supply & Fix for white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and directed.

Supply & Fix in rep PVC valve less syphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve flaot and handle including bracket complete all as specified and directed.

Supply only flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified.

Supply and fix for PVC connection 15 mm dia, 450 mm long including check nut complete, all as specified and directed.

Supply and Fix in rep bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore complete all as specified and directed.

Supply and fix in rep ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm complete all as specified and directed.

Dismantling of water tanks exc 250 & n. exc 500 Ltr capacity etc and removing to store complete all as specified and directed.

S & F for rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (500 Ltrs) capacity complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to stores complete all as specified and directed.

S & F for 110 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints fixed to walls and laid in trenches complete all as specified and directed.

Supply and Fix for PVC (SWR) bends with access door any, radious 110 mm bore complete all as specified and directed.

Supply and Fix for PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

Dismantling Plain, corrugated or RMP sheet any gauge thickness including Nanital or similar pattern roof coverings complete all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick (AZ-150) of an colour having tensile strength of 550 Mpa as in roof ridges, fixed with self tapping screws complete all as specified and directed.

S & F in rep Stainless steel wire mesh 0.36 mm dia of wire average width of aperature 1.4mm fixed to frame complete all as specified and directed.

Panwar Electrical