ADDITION/ALTERNATION AND SPECIAL REPAIRS TO LT DISTRIBUTION SYSTEM AT WED AREA AND CERTAIN SANCTIONED WORKS AT ALWAYE

Amount

Excavation in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth for foundation of pole and laying of underground electric cable in soft/loose soil complete all specified and directed.

Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm complete all specified and directed.

Removing excavated material not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all specified and directed.

Supply and spread River Sand for cushioning and covering of UG cables in trenches complete all specified and directed. (Note : For measurement purpose only punned thickness shall be measured and paid)

Supply and laying un-reinforced precast concrete cable cover class LV type-I flat size 250mm x 150mm x 40mm complete all specified and directed.

Supply and fixing GI pipe light grade with necessary fittingsto walls or laid under road for passing cables complete of size 80 mm dia complete all as specified

Supply and fixing GI pipe light grade with necessary fittingsto walls or laid under road for passing cables complete of size 40 mm dia complete all as specified

Supply and Lay UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated, screened, PVC bedded, steel strip or wire armoured electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 120 Sqmm with suitable cable gland complete all as specified and directed.

Ditto all as per Serial Item No 8, but Cable of size 3.5 core 50 Sqmm

Ditto all as per Serial Item No 8, but Cable of size 4 core 10 Sqmm

Ditto all as per Serial Item No 8, but Cable of size 2 core 10 Sqmm

Supply and fixing thermoplastic polycarbonate IP65 panels, made of high quality Polycarbonate PC - GFS (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, self-extinguishing, having high impact against mechanical load, made of halogen and silicon free recyclable material conform to RoHS directive 2002/95/EC, UV resistant according to IEC 61439-1, having high grade internally embedded gasket made of Polyurethane (PUR). All left or right side enclosures should have pre-moulded knockouts for side cable entry or for future extension. The panel board manufacturer shall have CPRI certification for similar panels in accordance with IEC60439-2.For better safety enclosure should withstand glow wire test at 960 Deg C in accordance with IEC 60 695-2-11 UL subject 94, should be flame retardant and self-extinguishing in nature. Degree of protection against mechanical load IK 08 (5 Joule) ) with accordance with EN IEC 62262, Rated insulation voltage should be 690V AC as per IEC 60664.

The feeder pillar panels shall be fully wired as per latest electrical standards ready to use at site and shall be with Floor mounting frame and canopy suitable for outdoor use. With 250A rated copper bus bar at 1.6A per Sqmm current density for 3 phase and neutral in accordance with IEC 61439-2. Comprising of the following including taking down the old existing panel and necessary earth work and testing complete. Note: Cost is inclusive of all MCCBs, MCBs, EOL, Multi functioning meter and accessories etc. (i) INCOMING: (a) MCCB 4 Pole 100 Amps, 25 KA Breaking capacity - 01 No (b) Multifunctioning meter (Next Gen) - 01 No (c) RYB Indication lamps - 01 Set (ii) OUTGOING:- (a)MCCB 4 Pole 40 Amps, 25 KA Breaking capacity - 03 Nos (b) MCB FP, 32 Amps, 415 Volts, 10 KA Breaking capacity - 02 No

All as per item No 12 above (Size of panel without pedestal 900 x 1200 x 214 mm) with 40 x 40 x 6mm MS angle iron floor mounting frame (i) INCOMING: (a) MCCB 4 Pole 125 Amps, 25 KA Breaking capacity - 01 No (b) Multifunctioning meter (Next Gen) - 01 No (c) RYB Indication lamps - 01 Set (ii) OUTGOING:- (a) MCCB 4 Pole 100 Amps, 25 KA Breaking capacity - 03 Nos (b) MCCB 4 Pole 40 Amps, 25 KA Breaking capacity - 01 Nos (c) MCB SPN 32 Amps, 240 Volts, 10 KA Breaking capacity - 01 No NOTES FOR ITEM NO 12 &13 All MCCBs are of Thermal magnetic release & adjustable type.

Supply, installation, Testing and Commissioning of 6Metre GI Octagonal pole single section with bottom dia 130mm, top dia 70mm having sheet thickness 3mm. The door height cutout should not be more than 500mm with door elevation 500mm. The size of the reinforced rod should be 30x4mm. Size of the base plate should be 250 x 250 x 16mm with thickness of base plate 16mm(Minimum). PCD for the holes should be 260mm with foundation bolt dia M24, length of the foundation bolt 750mm with four foundation bolts .Pole should have arm to mount Single Flood/street light with 15-degree Arm bracket and the total height of the pole should be 6000 mm above the finished Ground level including PCC foundation, J Bolt, nuts and washers as per the drawing of Manufacturer's instructions complete all as specified and as directed. Note:- The rate quoted includes all connected works such as excavation, PCC, RCC, reinforcement , nuts & bolts etc.

Supply & Fix Outdoor type, weather proof, thermoplastic polycarbonate cable junction box, IP-66/69 in accordance with IEC 60529, With 5 pole terminal suitable to terminate up to 10 Sqmm 4 core and 2 core cables with metric knockouts on side walls of size 205 x 255 x 112 mm complete all as specified and directed. Make-Hansel Cat No KF2525 G or equivalent in Legrand/Schneider.

Supply & Fix MCB SPN 6 to 32 Amps, 220 volts, 10 KA, 'C' Series complete all as specified and directed.

Supply & Fixing new generation, energy saving and environmental friendly long life LED Street light 70 watt, made up of pressure die cast aluminium housing, toughened glass with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP 66 Protection and impact resistant of IK07 with 10KV Built in surge protection device complete all as specified and directed.

Dismantling and taking down and refixing of serviceable street light fitting of 70 to 120 watt complete all as specified and directed.

Supply and fix 3 core flexible Alminium cable 4 sqmm from cable junction box to street light fitting with and including ERW Steel conduit of 20 mm dia with clamps, nuts, bolts etc complete all as directed.

Dismantling and taking out of old existing unserviceable steel & iron items from poles such as cross arms, bracing, supports, clamps and back plate fabricated from structural steel sections including nuts & bolts washers of any description and in any position from LT over head lines poles/street light poles complete all as specified and directed.

Dismantling and taking out of old existing unserviceable insulators of any description and in any position from LT OH line poles & Steel light poles complete all as specified and as directed

Dismantling and taking out of old existing unserviceable guard wire of any description and in any position from LT OH line poles & Steel light poles complete all as specified and as directed

Dismantling and taking out of old existing unserviceable aluminium conductor of any description and in any position from LT OH line poles & steel light poles complete all as specified and as directed

Dismantling concrete poles/ struts of any size complete all as specified and as directed

Material and labour for providing Plain cement concrete type B1 1:2:4 using 20mm graded aggreagte as in for filling of road cuttings etc complete all as specified and as directed.

Material & Labour for Earthing complete with GI Steel earth plate electrode 600 x600x6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) earth plate paced on all side with charcoal mixed with salt to a thickness of 150mm in layers, with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia, soldered and riveted to earth plate. Earth strip will be protected by using 40mm dia bore GI pipe light grade. The earthing includes PCC Pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 metres etc complete all as shown in electrical plate No. 3 of SSR Part-I 2009, connected to earthing test point all as specified or indicated including testing on completion.

Material and labour for GI Steel wire 4 mm dia for continuous earthing on poles or for guarding cradles hexagonal or rectangular including stringing and connected to earth wire complete all as specified and directed.

Dismantling of structural steel work including door and gates but excluding framed truss etc complete all as directed.

Demolition of Cement Concrete (Reinforced) of any description and in any position not otherwise specifically provided for columns complete all as specified and as directed.

Material and labour for Plain cement concrete type D2 1:4:8 (40mm graded aggregate) in foundation filling and mass concrete complete all as specified and as directed

Material and labour for Reinforced cement concrete 1:1.5:3 type A1 (nominal mix) Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs , under - reamed piles and mass concrete complete all as specified and as directed.

Material and labour for Reinforced cement concrete 1:1.5:3 type A1 (nominal mix) columns, pillars, Piers, posts and struts complete all as specified and as directed.

Use and waste Form work to sides of concrete foundations, footings, basement of columns, raft and raft beams, side and soffits (if any) of foundation and plinth beams; and similar work; vertical or to better complete all as specified and as directed.

Use and waste Form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Material and labour for Mild steel TMT bars 10mm dia cut to length, bent to shapes required including cranking, bending, spirally hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde E-250) Part I quality -A or Fe 290 (Gde-E-165) complete all as specified and as directed.

Material and labour for TMT bars 6mm dia and over up to and including 10mm dia as in stirrups, spacers and binders with including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde E-250) Part - I quality -A or Fe 290 (Gde-E-165) complete all as specified and as directed.

Supply and fixing and erection of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., with steel of Grade Fe 410-W (Gde-E- 250) quality-A, complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Supply and fixing and erection of 1.25mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required complete all as specified and as directed.

Using Tools & Plants Reinforced cement concrete cutting up to a depth of 2.5 cm into concrete walls and trimming surface as required , girth exceeding 30 cm complete all as specified and as directed.

Add for every 2.5 cm extra to Sl Item No 39 or part thereof in depth (up to 30 cm) complete all as specified and as directed

Material and labour for providing Plain cement concrete type B1 1:2:4 using 12.5mm graded aggreagte as in hold fast fixing, etc complete all as specified and as directed.

Material and labour for Rendering 15mm thick, in cement mortar 1:4 on fair faces of brick work, finished even and smooth without using extra cement complete all as specified.

Supply and fixing of Galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbed at 75mm spacing’s and straining and fixing to wire entanglements aprons, barriers, gates etc. including, securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc. as directed (each line wire to be measured)

Taking down and re-fixing (During execution if required ) in framed work as in door or gate of angle or other section with gasket plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering (exclusive of steel sheet or other covering, running rails and guides) hanging/ fixing in same opening all as directed by Engineer In-Charge.

Material and labour for preparing new surface and applying two coats of cement base paint over alkali resistance primer on new plastered surfaces of wall complete all as specified.

Material and labour for preparation of new or previously untreated surfaces exceeding 10 cm width or girth applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing of concertina coil of 980mm diameter made out of 2.6mm dia spring steel core wire 240 Gram/m2 (minimum) dipped with corrosion preventive fluid (rusilo 901) of Castrol make in white colour, each coil having a minimum 56 turns (circles) and an average weight not less than 14.0 Kg (plus or minus 5%) razor length minimum 10 mm and spacing between razors 25mm centre to centre including handle and spike at both ends of coil, erected in position on top of security gate/ compound wall (length of each coil 12.0 metre) complete all as specified and directed.

Supply and fixing Mild steel round bars 10mm dia for tieing concertina coil to angle iron stand, Fe-410-W (Gde E-250) quality-A or Fe 290 (Gde - E-165) cut to length, bent to shape required, including cranking, bending spirally for hooping for grills, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

Supply and fixing of Round/Square pipe Delineators 800mm height with reflective tape including excavation,plain cement concrete 1:3:6, returning filling etc complete all as specified and directed.

Supply and fixing of Cat's Eye/Road Studs/Raised Payment Marker of size 90X110X17mm complete all as specified and directed.

Supply and fixing of Road Safety Convex Mirror 800mm dia With stand and post including excavation, plain cement concrete type B1, 1:3:6, returning, filling etc complete all as specified and directed.

Material and labour for thermoplastic road reflective paint for road marking as lines of width 100 to 150mm and colour as directed by Engineer In Charge.

Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having 80 litres approximate storage and 40 litres per hour nominal cooling capacity (BEE 5 Star rated) with fittings, drain pipe etc as required at site complete all as specified.

Supply and fix Voltage stabilizer with copper wounded transformer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A, 240V and connecting complete all as specified.

Material and labour for sub main wiring with 2 runs of 2.5 Sqmm PVC insulated unsheathed single core multi standard copper conductor cable, FRLS, ISI marked and one run of 2.5 Sqmm multi stranded insulated copper conductor cable, FRLS, ISI marked as earth continuity conductor drawn through concealed stove enameled steel conduit of suitable size and all accessories, not less than 2mm thick, fire resistant, ISI marked and making good the disturbed surfaces of walls / floors / ceiling etc and including removing the existing aluminum sub main wiring cable, all as specified and directed. (Note:-Required for continuation of point wiring beyond 7.5 metrs)

Supply and fix in repairs MCB SP 6 to 32 Amps, 'C' series all as specified and directed.

Supply and fixing of 250 Litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified.

Supplying and laying of 20 mm outer dia bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Supply and fixing CPVC Ball Valve outer diameter 20 mm screwed both ends or flanged both ends including taking out existing unserviceable gate valve complete all as specified.

Supply and fixing Ball brass valves, high pressure 20 mm with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified.

Supply, installation, testing and commissioning of split air conditioning unit 1.5 TR capacity Inverter type complete with cordless remote control, minimum 5 star labeled, five year warranty on indoor and outdoor PCBs, Ten year warranty on compressor, eco friendly refrigerant gas, 4500 Kcal / Hr, 50 Hz, 240 volts, air cooled copper condenser with all accessories varied speed including fixing the outdoor unit with suitable stand site requirement and fixing of room (high wall) unit on wall with necessary wall cutting/ making holes to pass the refrigerant pipes, drain pipes, cables etc and making good to match with existing finishing complete, providing and making interconnection, including suction and discharge copper pipes with refrigerant including with nitrile rubber insulation and control cable from indoor to outdoor as required at site, Power cabling from Isolator/ Enclosure to unit, first charging of refrigerant gas, drain piping of suitable size including connection drain lines from unit to nearest drain points complete all as specified

Supply, installation, testing and commissioning of split air conditioning unit 2 TR capacity Inverter type complete with cordless remote control, minimum 5 star labeled, five year warranty on indoor and outdoor PCBs, Ten year warranty on compressor, eco friendly refrigerant gas, 6000 Kcal / Hr, 50 Hz, 240 volts, air cooled copper condenser with all accessories varied speed including fixing the outdoor unit with suitable stand site requirement and fixing of room (high wall) unit on wall with necessary wall cutting/ making holes to pass the refrigerant pipes, drain pipes, cables etc and making good to match with existing finishing complete, providing and making interconnection, including suction and discharge copper pipes with refrigerant including with nitrile rubber insulation and control cable from indoor to outdoor as required at site, Power cabling from Isolator/ Enclosure to unit, first charging of refrigerant gas, drain piping of suitable size including connection drain lines from unit to nearest drain points complete all as specified

Dismantling cutting and refixing of existing Polycarbonate sheet as per Site requirement including connected accessories and fittings such as nut, bolts or any cutting/binding works complete all as specified and directed.

Supply and installation of air Exhaust Ventilator driven by natural wind, operate by the utilizing the wind energy to induce the air flow in the building .The Manufactured air exhaust ventilators employ the centrifugal force to get the air drawn through the turbine along with withstands high wind velocity, anti capillary side lap ,leak proof made out of aluminium with blade 42 nos , side 24 inches ,surface treatment painted of silver colour ,Polycarbonate sheet, back plate etc as per requirement including connected accessories such as nut bolts or cutting/binding works complete all as specified and directed.

Amount of Credit Schedule shall be deducted to arrive the Contract Sum.

Sreema Enterprises

M/s.Rejoy Constructions