Electrification, LED illumination, Solar

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing two module type stepped type electronic fan regulator on the existing modular plate switch box including connections butexcluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75 mmX75 mm)

6 Module (200 mmX75 mm)

8 Module (125 mmX125 mm)

12 Module (200 mmX150 mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 amp socket outlet

Telephone socket outlet

TV antenna socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way, Double door

12 way , Double door

16 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

6 way (8 + 18), Double door

8 way (8 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 63 A rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63 A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300mm long, copper tube, having single prong at top, with 85 mm dia 3mm thick copper base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/sweating and soldering etc as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Above 95 sq. mm and upto 185 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

120 mm dia (OD-120 mm & ID-103 mm nominal)

Supplying and fixing of following type recessed / surface mounted LED light fixture complete with drivers, earthing point complete as required. (Havells or equivalent)

18W LED downlighter

36-40 watt LED(1X4)

36-40 watt LED(2X2)

LED TUBE 20 watt batten

mirror light 7-9 watt

12W LED bulb

Supplying including fitting fixing of A.C. Ceiling fan 1200 mm sweep 50 watt complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator].

Supplying including fitting fixing of A.C. Exhaust fan High Speed 225 mm sweep in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.

Supply of ISI marked Copper conductor XLPE insulated cable as per IS , armoured, sheathed 1100 volts grade as required.

4cx10 sq mm

3.5cx150 sqmm

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & vermin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,terminal arrangement for incomings/outgoings cables and also outgoing terminations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate, amps meter , volt metes and led indicaotrs etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing.PTTA Panel Incomer : - 400 amps four pole MCCB 36 KA. Busbar : - 400 amp 3 phase and neutral as per incomer. Changeover :- 400 Amps chngeover switch. Outgoings: - 63 amps four pole MCCB 25 KA. - 6 nos. 63 amps four pole MCB 25 KA. - 4 nos. 32 amps four pole MCB 25 KA. - 4 nos. 32 amps double pole MCB 10 KA. - 4 nos.

SITC OF 160 KVA SILENT DG SET COMPRISING DIESEL ENGINE 4 STROKE 1500 RPM WATER COOLED 150O RM COUPLED TO 160 KVA 415 V ALTERNATOR COMPLETE WITH BASE FRAME FUEL TANK AVM PADS BATTERY WITH LEADS MANUAL CONTROL PANEL AND WEATHER PROOF CANOPY. THE DG SET MUST BE CPCB2 APPROVED.THE CONTOL PANEL MUST COMPRISE OF RATED MCCB, CONTOL UNIT TO INDICATE ALL INPORTANT PARAMETERS ALONG WITH ALL SAFETIES OF DG SET

Solar Lights Supplying installation, testing and commissioning11W or 2000 LUMENS ALL IN ONE SOLAR LIGHT Integrat LED Solar Street Light Pressure Die Cast Aluminium Housing reliable & robust construction, minimum system efficacy of 2000 lumens, system wattage 12V DC, 11Watts (+/-10%), SMD LEDs With PMMA Lens plat, External built proper heat sinks and UV stabilized polycarbonate cover IP65 & life of LED luminaire engine should be 50000hrs. Overall total Efficiency of the Electronics should be Minimum 90%. High efficiency reliable PV Module suitable for even harsh conditions, CCT >5700K, CRI 70. Solar panel module capacity 12V, 28Watts peak & Solar Cell Efficiency min 12%, crystalline & highly efficient MPPT based charge controller and 12.8 V, 13.6 Ah IP68 Lithium Ferro Phosphate (LiFePO4) battery with proper battery management system. The luminaire should be housed in IK 08 impact resistance certified aluminium pressure diecast housing with anti-corrosive coating and must have a UV stabilized polycarbonate cover. The fixture should have designed for Street light application & should have flexible angle of mounting from 0-15 degree adjustable, Arm & Pole Mount for diverse geographical condition. Ambient temperature range for charging 0 to +45 °C Ambient temperature range for discharging (when light is on) -20 to +35 °C. Factory configured LED’s Load & PIR sensor dimming for optimum of autonomy uses up to 24hrs. Dimming profile should be as from dusk –first 05 hours sensor enabled, next 05 hours sensor disabled with fixed at 30% brightness, & next till dawn sensor enabled. System should have smart self-diagnostic feature for indicating battery charging, cut off & fault if any. Company Logo shall be engraved to avoid any distrusts & complete system should have minimum warrantee of 12 months. Lighting fixtures will be mounted on 6-meter pole GI Pole(included) .

façade lighting

Supply, Installation, Testing & Commissioning of LED projector light fixture 10W, LED, 3000-6000K Color tunable IP 67, IK08. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK08. Voltage input DC24V . The luminaire should have options for various beam angle: 30°. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature . Minimum Light fixture Lumen output atleast 600 Lumens. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. Test report required as per standards; LM79 Test Report, Vibration Test (IEC60068-2-6), Drop Test (IEC60068-2-31:2008), IK Test Report (IEC62262), Heat Resistance Test Report (IEC60598-2-3), Thermal Test Report (IEC60598-2-3), IP Test Report (IEC60598-2-1), Electrical/ Insulation Test Report (IEC60598-2-3), Endurance Test Report (IEC60598-2-3), Humidity Test Report (IEC60598-2-3).

Supply, Installation, Testing & Commissioning of LED projector light fixture 40-45W, LED, 3000-6000K Color tunable IP 67. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK08. Voltage input DC24V . The luminaire should have options for various beam angle: 40°. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature . Minimum Light fixture Lumen output atleast 2400 Lumens. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. ; LM79 Test Report, Vibration Test (IEC60068-2-6), Drop Test (IEC60068-2-31:2008), IK Test Report (IEC62262), Heat Resistance Test Report (IEC60598-2-3), Thermal Test Report (IEC60598-2-3), IP Test Report (IEC60598-2-1), Electrical/ Insulation Test Report (IEC60598-2-3), Endurance Test Report (IEC60598-2-3), Humidity Test Report (IEC60598-2-3).

Supply, Installation, Testing & Commissioning of LED projector light fixture 40-45W, LED, 3000-6000K Color tunable IP 67. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK08. Voltage input DC24V . The luminaire should have options for various beam angle: 2°. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature . Minimum Light fixture Lumen output atleast 2400 Lumens. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. ; LM79 Test Report, Vibration Test (IEC60068-2-6), Drop Test (IEC60068-2-31:2008), IK Test Report (IEC62262), Heat Resistance Test Report (IEC60598-2-3), Thermal Test Report (IEC60598-2-3), IP Test Report (IEC60598-2-1), Electrical/ Insulation Test Report (IEC60598-2-3), Endurance Test Report (IEC60598-2-3), Humidity Test Report (IEC60598-2-3).

Supply, Installation, Testing & Commissioning of LED projector light fixture 100-110W, LED, 3000-6000K Color tunable IP 67. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK08. Voltage input DC24V . The luminaire should have options for various beam angle: 25°. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature . Minimum Light fixture Lumen output atleast 6000 Lumens. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. ; LM79 Test Report, Vibration Test (IEC60068-2-6), Drop Test (IEC60068-2-31:2008), IK Test Report (IEC62262), Heat Resistance Test Report (IEC60598-2-3), Thermal Test Report (IEC60598-2-3), IP Test Report (IEC60598-2-1), Electrical/ Insulation Test Report (IEC60598-2-3), Endurance Test Report (IEC60598-2-3), Humidity Test Report (IEC60598-2-3).

Supply, installation, testing & Commissioning of LED linear wallwasher 18-20W, 3000-6000K Color tunable with DMX512 decoder inside the housing made of aluminium extrusion, , exterior-rated linear luminaire (1000mm), DMX512 with inbuilt decoder PCB for individual addressing for programming, Rated input supply of Input Voltage 24V DC, Luminaire luminous flux Minimum range 1090Lm. IP protection rating : IP67 and IK07. ; LM79 Test Report, Vibration Test (IEC60068-2-6), Drop Test (IEC60068-2-31:2008), IK Test Report (IEC62262), Heat Resistance Test Report (IEC60598-2-3), Thermal Test Report (IEC60598-2-3), IP Test Report (IEC60598-2-1), Electrical/ Insulation Test Report (IEC60598-2-3), Endurance Test Report (IEC60598-2-3), Humidity Test Report (IEC60598-2-3).

Supply, installation, testing & Commissioning of LED linear wallwasher 10-12W, 3000-6000K Color tunable with DMX512 decoder inside the housing made of aluminium extrusion, , exterior-rated linear luminaire (500mm), DMX512 with inbuilt decoder PCB for individual addressing for programming, Rated input supply of Input Voltage 24V DC, Luminaire luminous flux Minimum range 600Lm. IP protection rating : IP67, IK08. ; LM79 Test Report, Vibration Test (IEC60068-2-6), Drop Test (IEC60068-2-31:2008), IK Test Report (IEC62262), Heat Resistance Test Report (IEC60598-2-3), Thermal Test Report (IEC60598-2-3), IP Test Report (IEC60598-2-1), Electrical/ Insulation Test Report (IEC60598-2-3), Endurance Test Report (IEC60598-2-3), Humidity Test Report (IEC60598-2-3).

Supply, installation, testing & Commissioning of LED 16mm wide Flexible Strip IP68, IK08 fully diffused with Aluminium channel 10W/mtr, 24V, 3000K, ; LM79 Test Report, Vibration Test (IEC60068-2-6), Drop Test (IEC60068-2-31:2008), IK Test Report (IEC62262), Heat Resistance Test Report (IEC60598-2-3), Thermal Test Report (IEC60598-2-3), IP Test Report (IEC60598-2-1), Electrical/ Insulation Test Report (IEC60598-2-3), Endurance Test Report (IEC60598-2-3), Humidity Test Report (IEC60598-2-3).

Supply, installation, testing & Commissioning of LED 8mm wide Flexible Strip IP68, IK08 fully diffused with Aluminium channel 6W/mtr, 24V, 3000K for periphery highlighting, ; LM79 Test Report, Vibration Test (IEC60068-2-6), Drop Test (IEC60068-2-31:2008), IK Test Report (IEC62262), Heat Resistance Test Report (IEC60598-2-3), Thermal Test Report (IEC60598-2-3), IP Test Report (IEC60598-2-1), Electrical/ Insulation Test Report (IEC60598-2-3), Endurance Test Report (IEC60598-2-3), Humidity Test Report (IEC60598-2-3).

Supply, installation, testing & Commissioning of 2X512 DMX 512 Controller and synchoronization with the existing DMX controller, Input Power 5-5.5V DC 0.6A, Output Protocol DMX512, Programmability Windows, Mac OS, iOS, Android, Connections Type C USB, XLR3, Ethernet, HE20, battery Memory microSD SD & SDHC, Environment IP20. 0°C - 50°C, Buttons 10 buttons for direct access, 2 buttons to change scene, + 1 button to change zone Dimensions 160x90x45mm 268g, OS Requirements Mac OS X 10.8-10.15, Windows 7/8/10 64bit Standards EC, EMC, ROHS.

Supply, installation, testing & Commissioning of Signal Booster/Splitter with 8-Way output for spreading and amplyfing the DMX Data signals in multiple directions, Input-220-240V AC

Supply, installation, testing & Commissioning of DMX Special cable DMX cable (single pair) having one 22AWG pair stranded (7x30) tinned copper conductors, Datalene (FHDPE) insulation, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacketCable.

Hot dipped galvanised junction box fabricated from 1.6mm thick sheet steel having size: 300x150x100mm with stud type terminal suitable for terminating 4C X 10.0 sq.mm. armoured Copper cable & LED driver

Supply, installation, testing & Commissioning of MS Pole 76mm diameter, 3300mm height with the required base plate, foundation nut bults, template, with required window for electrical access. The pole should be equipped with the required brackets for the mounting of projector lights along with the accomodation of the power supplies.

3 Phase, 415V Lighting panel outdoor type, wall mounted, double door with lockable arrangement made from 2 mm thick CRCA sheet steel, powder coated with off white colour (inside & outside), 1 no. earth stud on each side face, LED indicating lamps for incomer: I/c. 40A 4P MCCB (25kA) - 1no., 40A 4P contactor, 24hrs. Timer, O/G: 10A 3P MCB (10kA) - 5 nos. (including 1 no. spare)

Supply & laying of Cables 1.1 kV grade 4Cx10 sq.mm, Copper conductor, XLPE insulated, PVC sheathed, armoured cable as per IS 7098 (Part-1) - 1988 (to latest amendment).

Supply & laying of Cables 1.1 kV grade 4Cx6 sq.mm, Copper conductor, XLPE insulated, PVC sheathed, armoured cable as per IS 7098 (Part-1) - 1988 (to latest amendment).

Supply & laying of Cables 1.1 kV grade 3C x 2.5 sq.mm., stranded copper conductor, PVC insulated cable as per IS 694 - 1990 (to latest amendment).

Supply & termination of cable using Single compression glands & Copper lugs for 1.1 kV grade 4Cx10 sq.mm, Copper conductor, XLPE insulated, PVC sheathed, armoured cable as per IS 7098 (Part-1) - 1988 (to latest amendment).

Supply & termination of cable using Single compression glands & Copper lugs for 1.1 kV grade 4Cx6 sq.mm, Copper conductor, XLPE insulated, PVC sheathed, armoured cable as per IS 7098 (Part-1) - 1988 (to latest amendment).

Supply & installation of Double walled corrugated (DWC) HDPE pipe 50/38mm(outer/ inner dia.) as per IS 14930 (to latest amendment) from feeder pillar to pole / luminaries, including excavation, backfilling and making the surface good.

Supply & installation of following Miscellaneous Items:Bracket (Angle) for installing projector ( 1 mtrs. Long 25x3mm GI flat)

Supply & installation of following Miscellaneous Items:Bracket for installing wall washer (2mtrs. Long 25x3mm GI flat)

Supply & installation of following Miscellaneous Items: Bracket for installing JB (1 mtrs./ JB)

Supply, installation, testing & Commissioning of IP67 power supply 24V output. Power consumption- 200W

Supply, installation, testing & Commissioning of enclosure for DMX splitter, controller, power supply : Size 450 x 300 x 250 mm, plain sides, grey cover, Degree of protection: IP 67/ IP 67, Impact strenght: IK 08, Material, base: Fiberglass reinforced polycarbonate, Material, cover: Polycarbonate, Material, cover screws: Polyamide, Material, gasket: Polyurethane, Colour: RAL 7035

Programming, Testing, Troubleshooting and synchronization of exisitng DMX control system with the new controller. The shifting of various data wire connections for the proper scene settings including the addressing of fixtures with the multiple scenes(atleast 20Themes) as per instruction of engineer in charge.

SITC and programming of Online DMX Controller System with Standalone interfaces along with centralized control system USB – DMX 512/1024 channels, capability of windows 10/9/8/7/XP / VISTA / MAC, Ubuntu, cloud application, mobile application with 32/64 bit CPU technology. The features should be ‘real time monitoring’, ‘Wireless cellular (2G/3G/4G/WiFi), LoRA WAN, etc. ’ , ‘sensor data collection’, ‘video/image/information displaying capability for future aspects’, etc. • 40 main playback faders • Triggering via MIDI messages and Time code • Supports for DMX expansion up to 512 universes • USB to DMX • Artnet (Unicast, Multicast) • E1.31 • sAcn • DDP

SITC of 24 Giga port network Switch i/c connection etc as required.

Shubham Traders