MLA ADS 2025-26 Sri Govindan master MLA - Supply and installation of solar mini mast lights and construction of footpath at Vellikkeel tourism centre and nearby places in Anthoor Municipality, Taliparamba LAC

CIVIL WORKS - FOUNDATION FOR MINI MAST

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

PATHWAY INTERLOCKING

50.6.3.1 Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete

50.2.25.1 Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

OD224221/2025-2026 Providing and laying 60mm thick factory made cement concrete intrelocking block of M-30 grade made by block making machine with strong vibratory compactor of approved size, design and shape laid in required colour and pattern over and including 50mm thick stone aggregate 6mm nominal size filling the joints with fine sand etc all complete and as per the direction of Engineer in-charge. (Modified 16.68 by replacing sand bed 6 mm stone aggregate bed)

PATHWAY HANDRAILS

10.16.3 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes

SOLAR LIGHTS

OD105333/2025-2026 Supply and installation of 2*30W LED Solar system output greater than 120 lumen/W 3000-3700 K with IP 66 protection LED Chip make Cree/Bridgelux/Nichea, which come with 50,000 hours guaranteed performance, Aluminium extrusion/ Aluminium pressure die-cast powder cotted led lamp housing, facbricated G.I powder cotted panal mounting structure, 125w policristaline solar panal, 25.6/24Ah LiFePo4 battery & solar panal detect day/night condition and automaticaly turn the lamp on at sunset and off at sun rise, High efficient PWM or MPPT charge controller and charging time 5-6hrs ,internelly programed dimming functions,overcharge and battery low cut protection, LED driver efficiency 80%

OD105527/2025-2026 Supply installation testing and commissioning of G.I Pole made of 70 mm diameter thickness 3mm base plate dimensions of 200x200x10 mm suitable for wind speed as per IS 875 Part III 0.2 M long GI pipe connected to bracket suitable for fixing Solar panels, bracket size- 110 mm x 200 mm double arm bracket 0.5mt including connectorfoundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 6 Meters.