Construction of Market Shed 20(Twenty) Nos. near Sonamura Electric office under Sonamura Nagar Panchayat during the year 2025-26.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil

Filling available excavated earth (excluding rock) in trenches plinth,sides of foundations etc, in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering,lead up to 50 m and lift upto 1.5m. -All kinds of soil

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All work upto plinth level: 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)

1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm/20mm nominal size). D.P.C. 40 mm thick

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement. All work upto plinth level. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering shuttering including struttings, propping etc. and removal of form work for: Foundations, footings, bases for columns etc. for mass concrete with timber plank.

Suspended floors, roofs, landings, balconies and access platform with timber planks

Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank

Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank

First class brick work in foundation and plinth including cost of all materials as required complete: - In cement mortar 1:4 ( 1 cement: 4 fine sand ).

Half brick masonry work with first class bricks in superstructure up to floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement: 4 fine sand ).

Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course of half brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete: - In cement mortar 1:4 (1 cement: 4 fine sand ).

Supplying and fixing rolling Shuttering of approved make made of required size M.S. laths interlocker through their entire length and jointed together at the end-by-end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 275 mm long wire spring grade No.02 and M.S. With handles, hold fast including embedding in cement concrete of required grade required for fixing in position all necessary fittings, including applying of approved steel primer etc. complete as required. 80x1.20mmM.S. laths with 1.20mm thick top cover

Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand: 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete as per direction of Engineer-in-charge. 40mm thick with 20 mm nominal size stone aggregate. 40mm thick with 20mm nominal size

Providing and laying cement plaster skirting up to 300 mm height with cement mortar 1 : 3 ( 1 cement: 3 fine sand ) finished with a floating coat of neat cement including rounding of junctions etc. complete all complete as per direction of Engineer-in-charge 18mm thick.

Tile work in skirting, risers of steps, dado upto 2 m height over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand) jointed with grey cement slurry @ 3.3 Kg/sqm, including pointing with white cement mixed with pigment of matching shade complete as per direction of Engineer-in-charge 8mm thick Rajnagar marble tiles (polished)

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement: 4 fine sand) making good the wall etc. complete as per direction of Engineer-in-charge. 110mm

Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete. 110mm

Providing and fixing fan clamp type-I of 16mm dia M.S. bar bent to shape with hooked ends in RCC slabs during laying including painting the exposed portion of loop all as per standard design complete.

12 mm cement plaster of mix In cement mortar 1 : 4 ( 1 cement : 4 fine sand )

15 mm cement plaster on the rough side of single or half brick wall of mix: In cement mortar 1 : 6 ( 1 cement : 6 fine sand )

Neat cement punning.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.[Payment shall be made after submission of Test Certificate issued by the Manufacturer] New Work (two or more coats) over and including water thinnable priming coat with cement primer.

Finishing walls with premium acrylic smooth exterior paint with Silicon additives of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete. Water thinnable cement primer