PROVISION OF TOILET IN SMC AND PROVISION OF 04 NOS 1.5 TON SPLIT AC AT AIR FORCE STN PHALODI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiling to store and rubbish off the premisses complete all as specified and directed.

Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, walls, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for precast cement concrete type C-1, (1:3:6) using 20mm graded aggregate masonry with solid blocks exc 10cm in width and setting in cement mortar (1:6) in wall complete all as specified and directed.

M&L for precast cement concrete type C-1, (1:3:6) using 20mm graded aggregate building block or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:6) in wall complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) (1:2:4) type B0 using 12.5mm graded stone aggregate as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed..

M&L for Rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and even complete all as specified and directed.

M&L for three coats of white wash to undecorated wall surfaces including preparation of new surfaces complete all as specified and directed .

M&L for Coloured Glazed ceramic tiles in vertical surface 450 x 300 x 7 mm/350 x 250x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick plaster in cement mortar (1:3) complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate ) as in floor finishes and leveling course complete all as specified and directed.

M&L Non skid coloured joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes. complete all as specified and as directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exc 0.36 sqm , over 15 mm thick screed bed CM (1:6),in floors etc set and jointed in neat cement slurry and pointed in white cement slurry and pointed in white cement or coloured cement to match the shade of tiles complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 2mm thick Moulded colour PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed.

S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.

S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood kail beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F factory made steel window or ventilators fixed type including glazing barscomplete all as specified and directed.

M&L for preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying a coat of pink primer and two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer complete all as specified & directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F Aluminium alloy handles fabricated type anodised of size 150mm long, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 150mm long of extruded section complete all as specified and directed.

S&F 300 mm aluminium alloy, anodised sliding door bolts with hasp, staple and fixing clips of sheet, cast or extructed section and fixing bollts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium/GI/MS as per specification and drawings complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 mm x 605 mm including adjustable hook and wire for false ceiling and section of grid as specified in SSR Part I -2009, weight of section not less than 0.70 Kg/Sqm of size 40 mm x 25 mm including hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of cealing cleats made out of G.I flat 40x3mm size 60mm long complete all as specified and directed.

S&F vitreous china wash down water closet pan wall hung EWC white/ivory/off white(closed pattern), including all necessary accessories like rag bolts/gel gasket etc excluding flushing cistern and flush pipe, including plastic water closet seat, black closed pattern with flat bottom, and cover and mild steel chromimum plated hinging device complete all as specified and directed.

S&F Health faucet(ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.

S&F vitreous china urinal,bowl type of size 465x355x265mm(minimum) white with grating and union for discharge pipe(excluding flushing cistern, flush pipe and waste pipe) type (back or corner wall type) complete including providing and fixing plugs badding uinal against wall in cement concrete (1:2) ,securing urinal to plugs with and including 60 mm long bass scews ,pointing around urinal back in cement ,fixing automatic flushing cistern in brackets,flush pipe,grating and union for discharge pipe(exclusive of fixing supply pipe to flushing cistern ,trap and waste pipe) complete all as specified and directed.

S&F Vitreous china wash basin white flat back size 580 x 450mm size, including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste fitting & waste pipe 32mm bore complete fixed complete all as specified and directed.

S&F 20mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of 500 Ltr capacity triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed.

Supply, laying, jointing & testing of 20mm outer dia 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings as socket, elbow, reducer, end cap, male & female threaded elbow, male & female threaded socket, Tee fixed complete to walls, ceilings or in floors, in trench etc. complete all as specified and directed.

Supply, laying, jointing & testing of 16mm outer dia 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings as socket, elbow, reducer, end cap, male & female threaded elbow, male & female threaded socket, Tee fixed complete to walls, ceilings or in floors, in trench etc. complete all as specified and directed.

S&F bib taps 15mm dia, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified and directed.

S&F 15 mm dia fancy type chromium plated stop/angle valves, cast copper aloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron and fixed complete all as specified and directed.

S&F pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed.

S&F PVC valve less, syphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F Grating square (slit) 150 of PTMT (min weight 100gms)with or without hole complete all as specified and directed.

S&F PVC (SWR) 75mm bore floor trap, plain with grating including jointing with solvent cement fixed complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed.

S&F toilet paper holder of vitreous china fixed to walls with brass chromium plated or stainless steel brass screws fixed complete all as specified and directed..

S&F soap dish vitreous china white of size 160x160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good for pipes and cutting out existing benching for and forming branch channels(1/2 round or ¾ section) in cement concrete (1:2:4), type B-1 smooth finished and forming benching as required for 100 mm dia pipe complete all as specified and directed.

M&L for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to floors of 75 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to floors of 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore fixed complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Removing excavated soil/material to a distance exc 250m but n.exc 500m and depositing where directed at a level not exc 1.5m above starting point complete all as specified and directed.

M&L for point wiring for one light/fan/exhaust point controlled by one switchwith PVC insulated, unsheathed 1.5 sqmm FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC concealed conduit medium grade not less than 20 mm dia ISI marked ivory colour with and including all conduit fittings and fixing accessories including not less than 1.60mm thick sunken anodised pressed steel terminal boxes/modular boxes suitable for fixing of modular face plates, 3.0 mm thick hylam sheet cover/modular plate cover for mounting switches, sockets, fan regulators etc incuding 1.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete all as specified and directed.

S&F ceiling rose 63 x30 mm three terminals polycorbonate body, complete all as specified and directed.

S&F flush type switch standard size of polycarbonate body single pole, one way 6 Amp complete all as specified and directed.

M&L for Sub main wiring with 2 runs of 2.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked 25mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 2.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor complete all as specified and directed. Note : Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.

S&F surface and wall mounted 20 watt LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

S&F Exhaust fan 300mm sweep, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery dishcarge 1710 CMH suitable for SP 230/250V, 50 Hz AC Supply with protective bird guard with louver shutters including grouting of frame in wall and connecting with and including 3 run 0.5 Sqmm single core, PVC insulated but sheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan complete all as specified and directed.

Supply, installation and testing of hi wall split unit indoor/outdoor complete with cordless remote control unit and with inbuilt air ionizer and plasma filter for better indoor air quality with capacity 1.5 Ton BEE 3.2 Star rated complete all as specified and as directed.

S&F voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 Volts with output voltage stabilzed at 230 Volts with accuracy of (+/-) 2.5% and speed of correction 8 volts per second of capacity 5KVA with and including connected accessories complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosures with 2 pin and earth plug and socket complete with one SPN MCB of 20 Amp rating 240 Volt complete all as specified and directed.

M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked 32mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth conductor and one run of PVC conduit of 32mm dia shall be measured and paid as one unit length.

S&F MCB Triple pole & neutral, 240 Volts, 63 amps breaking capacity 10KA (type 'B') complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply, laying, testing and commissioning cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, elecric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion complete all as specified and directed.. Note: (i) Excavation earthwork charcoal PCC pit is covered under this item. (ii) The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

S&F GI tubing light grade 25 mm dia along the wall/ in trenches/in duct/ in culvert/ road crossing and including provisioning of sitable mild steel flat iron clams and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.

LADDOS BUILDCON

KRISHNA CONSTRUCTION COMPANY