PROVISION OF SECURITY WALL NEAR WATCH TOWER NO 04 AT AF STN PHALODI

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pierholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out Hard or dense soil complete all as specified and directed.

M&L for Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) using 20mm graded stone aggregate as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified.

Formwork to sides of concrete foundations footings bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished of flat surface complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. for rough finished surface of concrete complete all as specified and directed.

Formwork to sides of pillers, posts, struts, piers, columns and stanchions of square , rectangular or polygonal for rough finished surface of concrete complete all as specified and directed.

M&L for TMT MS bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT MS bars of 5mm dia and upto 10mm dia as in stirrups and spacers cut to lengh bent to shape reqd incl cranking bending spirally for hooking for column and binding with MS annealed wire not less than 0.9mm dia complete all as specified and directed

M&L for precast cement concrete type C-1, (1:3:6) using 20mm graded aggregate masonry with solid blocks exc 10cm in width and setting in cement mortar (1:6) in wall complete all as specified and directed.

M&L for Mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, matching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for erecting of 610 mm dia punched tape concertina coil fencing, stretches along with two lines for RBT (supporting wire of the same material as concertina coil) having stranded specifications, average weight not less than 1.06 Kg/RM including coating of px2 compound (Anti Rust) and fixed in angle iron brackets on compound wall with and including using necessary scaffolding along the length of wall complete all as specified and directed.

S&F mild steel framed work as grills, gratings etc with end of bars shouldred and / or rivited or forged into spikes, framed guard bar barred iron door ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer complete all as specified & directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and even complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer on walls, complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed.

Removing excavated soil/material to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above starting point complete all as specified and directed.

Aggarwal Brothers and company (BID ID -3123254)

AJAY CONSTRUCTION COMPANY (BID ID -3123457)