Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAccepted-AOC 38 30 92 SAI NAGAR MARRIPALEM VISAKHAPATNAM 530 018 | VISAKHAPATANAM | ANDHRA PRADESH | 530018 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹9.1 L+₹1.7 L (23.0%)Rejected-Finance DOOR NO 57 28 10 4 2 BHAVANI GARDENS INDUSTRIAL ESTATE POST VISAKHAPATNAM 530 007 | VISAKHAPATANAM | ANDHRA PRADESH | 530007 | L2 | Rejected-Finance Being not L1 | |
| 3 | L3₹8.7 L+₹1.3 L (17.2%)Rejected-Finance | L3 | Rejected-Finance Being not L1 | |
| 4 | L4₹8.9 L+₹1.5 L (20.5%)Rejected-Finance D NO LIG 98 RAJEEV NAGAR KURMANNAPALEM VISAKHAPATNAM 530 048 | VISAKHAPATANAM | ANDHRA PRADESH | 530048 | L4 | Rejected-Finance Being not L1 |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
14 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Nitesh K Singh, IDSE AEE AGE (I) R and D NSTL
AGE (I) R and D, NSTL Complex, Visakhapatnam 530027
8411 REPAIRS/ MAINTENANCE TO SWITCH GEARS, LT FEEDER BOXES AND CONNECTED ACESSORIES AT NSTL RESIDENTIAL AREA UNDER AGE (I) RnD NSTL, VISAKHAPATNAM
2022_MES_553840_1
AGE I R AND D NSTL VIZAG 8411
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Visakhapatnam
Class E, Cat B(i)
7 documents required · 7 mandatory
₹500
AGE I R and D NSTL Visakhapatnam
₹19,000
31 Jan 2023
23 Sept 2022
17 Oct 2022
23 Sept 2022
14 Oct 2022
30 Sept 2022
Amount
M & L opening the bus bar and rear panel of LT Panel board (01 Nos incoming and upto 04 Nos outgoing), disconnecting the cables from the busbars, replacement of suitable size of aluminium lugs of various size (25 sq mm to 300 sq mm) through desired method, replacement of burnt out nuts/bolts, replacement of cable glands, replacement of internal wiring, replacement of partially burnt out bus bar (if required) taking down carefully the copper/aluminium bus bar as required at site, scrapping the bus bar by emery paper for removing the silt/carbon, replacement of PVC insulation tape (RYB),and taking down the rusted portion of door including removing bends/dents,refixing the door with new hinges,handles,nut bolts making good to disturb area & complete assembling the bus bar, LT Panel board complete for testing all as specified and directed by Engr-in-charge.
All as per item No. 02 above but of (01 Nos incoming and upto 08 Nos outgoing)
M &L for preparation of external & internal surfaces of LT panel boards/feeder pillar boxes consoles etc by scrubbing/CTC by emary paper by removing stains/rusted scales etc and applying two coats of synthetic enamel paint as colour approved by Engr-in-charge over a one coat of zinc oxide primer complete and cleaning meters/indicators/MES Nos,making good complete all as specified and directed by Engr-in-charge.
M &L for repairs to LT panels/Feeder pillar boxes/cope point box by opening door hinges and taking down the rusted portion of door including removing bends/dents,refixing the door with new hinges,handles,nut bolts making good to disturb area complete all as pecified and directed by Engr-in-charge.
M &L for taking down LT Air circuit breakers of various capacities for repairs,servicing comprising the following and refixing the same,re-orientation and taking down defective parts and refixing the same spare parts all as specified and directed. (a) Checking/repair of mechanical sysytem of ACB. (b)Checking/repair of the manual closing/tripping of breaker
S&F in repairs indicating lamp holder with bulb LED(Red Yellow,Blue,Green) type to indicate incoming supply suitable for 24 V DC/110 VAC/230Volts AC and all as specified and directed. Make:Teknic/ C&S /L&T
Material & Labour for cleaning and Servicing of APFC Panel including checking all connections, find faults for required power factor, checking control wiring circuit, replacement of control wiring if required, Replacement of spares like contactors, Capacitors and commissioning and testing of APFC panel after repair work to achieve required power factor complete all as specified and as directed by Engineer-in-charge. Note: Spares like contactors and capacitors are measured and paid separately as "Supply only".
Supply only Power capacitor cylindrical type Resin/ gas filled heavy duty 440 V, 50 Hz , 3-ph, AC having of capacity 5 KVAR all as specified and as directed. Make : L&T /Crompton / C & S
All as per item No.10 here in above but of capacity 10 KVAR all as directed.
All as per item No.10 here in above but of capacity 15 KVAR all as directed.
All as per item No.10 here in above but of capacity 25 KVAR all as directed.
Supply only Power contactor suitable for 5 KVAR capacitor 440 V, 50 Hz , 3-ph, AC having of capacity 5 KVAR all as specified and as directed. Make : L&T /Crompton / C & S
All as per item No.14 here in above but of capacity 10 KVAR all as directed.
All as per item No.14 here in above but of capacity 15 KVAR all as directed.
All as per item No.14 here in above but of capacity 25 KVAR all as directed.
Supply and fixing in repair MCCB, AC 415 V, 50 HZ, fixed type, capacity 400 Amps, 4 Pole, 36 KA, suitable to be fixed in LT panel complete all as specified and directed Make: Siemens/Legrand/ABB
All as per item No. 18 above but of capacity 250 amps 25 KA. Make: Siemens/Legrand/ABB
All as per item No. 18 above but of capaqcity 200 amps 25 KA. Make: Siemens/Legrand/ABB
All as per item No. 18 above but of capaqcity 160 amps 16 KA . Make: Siemens/ABB/Legrand
All as per item No. 18 above but of capaqcity 125 amps 16 KA . Make: Siemens/ABB/Legrand
All as per item No. 18 above but of capaqcity 25 Amps to 100 Amp 16 KA . Make: Siemens/ABB/Legrand
Supply only Aluminium lugs suitable for XLPE UG cable size of 10/16/25 sq mm
Supply only Aluminium lugs suitable for XLPE UG cable size of 35/50 sq mm
Supply only Aluminium lugs suitable for XLPE UG cable size of 70/95/120 sq mm
Supply only Aluminium lugs suitable for XLPE UG cable size of 185/240 sq mm
Supply only Aluminium lugs suitable for XLPE UG cable size of 400/630 sq mm
M & L for Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth including taking down old cable all as specified & directed in any soil complete all as specified and directed.
M & L for Returning filling in including spreading, levelling, watering and well ramming in layers not exc. 25 cm in thick all as specified and directed.
M & L for Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified by the Engineer-in-charge.
Supply and laying un-reinforced precast concrete cable cover Class LV type I, size 250 x 150 x 40mm
M & L for river dry sand cushioning to under ground cable intrenches including spreading, levelling and hand punning complete all as specified.
Material and labour for fault finding on HT/ LT cables of any size and any length with fault detective machine by thumbing method and suitable high voltage and all as and directed by Engineer-in-charge.
Supply, laying and fix in repair LT Cable laid in trenches, passing through pipes and fixed on wall/ floor/ ceiling with proper saddles , including testing of XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following size 10 sq mm 4 core including taking down old u/s UG cable. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it. 2. The excavation, earth work, sand cushioning and brick protection etc will be measured and paid separately under respective items.
All as per item No.35 above but of size 16 sq mm X 4 core
All as per item No.35 above but of size 25 sq mm X 3.5 core
All as per item No.35 above but of size 35 sq mm X 3.5 core
All as per item No.35 above but of size 50 sq mm X 3.5 core
All as per item No.35 above but of size 70 sq mm X 3.5 core
All as per item No.35 above but of size 95 sq mm X 3.5 core
All as per item No.35 above but of size 120 sq mm X 3.5 core
Supply and fixing cable jointing STRAIGHT THROUGH JOINT for 1100V grade cable for straight through joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3.5 core XLPE armoured, alluminum conductor cable of size 70 to 185 sq mm and all as directed by Engineer-In-Charge. Make :- 3M/ RAYCHEM/ CAMPAQ
Supply and fixing cable jointing STRAIGHT THROUGH JOINT for 1100V grade cable for straight through joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3.5 core XLPE armoured, alluminum conductor cable of size 240 to 400 sq mm and all as directed by Engineer-In-Charge. Make :- 3M/ RAYCHEM/ CAMPAQ
Supply and fixing cable jointing STRAIGHT THROUGH JOINT for 1100V grade cable for straight through joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3.5 core XLPE armoured, alluminum conductor cable of size 10 to 50 sq mm and all as directed by Engineer-In-Charge. Make :- 3M/ RAYCHEM/ CAMPAQ
Supply and fixing cable jointing kit 1100V grade cable for out door termination joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3.5 core XLPE armoured, alluminum conductor cable of size 240 to 400 sq mm and all as directed by Engineer-In-Charge. Make :- 3M/RAYCHEM/CAMPAQ
Cutting trench of width 30cm and depth n.exc. 60cm through road/ hard standing for laying cable through GI pipe and returning, filling in including spreading leveling watering and well ramming in layers not exc 25cm after laying the cable complete including provision of PCC type B1 filling for top 100mm layer all as directed.
GI Tubing light grade 40 mm dia for cable protection, laid under plinths/floors /roads /culverts or fixed on walls or concealed in walls or along the steel poles by means of M.S.F.I clamps with necessary bolts nuts washers etc Including taking down old u/s pipe complete all as specified.
All as per item No. 48 above but of GI Tubing light grade 80 mm dia
Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to GI earth strip 32x6 mm by mean of bolts, nuts, check nuts and washer of galvanised iron steel all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe of suitable size including testing on completion all as specified and directed.
M&L Earthing continuity galvanised iron strip 32x6 mm dia or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed by Engr-in-Charge.
M&L for PCC earth pit cover suitable as per site requirement making good to disturb area complete as specified and directed by Engr-in-charge.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .