Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-Finance | L1 | Accepted-Finance Lowest | |
| 2 | L2₹6.5 L+₹98,704 (18.0%)Rejected-Finance | L2 | Rejected-Finance reject |
Tender Value
₹5.8 L
EMD Value
₹11,700
Closing Date
7 Dec 2023, 11:00 amClosed
Executive Engineer
Jal Shakti DIvision Rajgarh
SH CO RCC sumpwell 20,000 lits cap., repair of pump house and providing steel roof over existing pump house
2023_HPIPH_82057_1
6570-6669 dated 29-11-2023
Open Tender
Civil Works
Item Rate
90 days
Rajgarh
Please refer Tender documents.
9 documents required · 9 mandatory
₹250
₹11,700
Yes
23 Dec 2023
1 Dec 2023
7 Dec 2023
1 Dec 2023
7 Dec 2023
1 Dec 2023
Amount
Excavation in foundation and trenches in all type of soil such as pickwork jumper work Kankar, moorum, shingles including decomposed soft and hard rock etcupto all heights stacking the excavated earth not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts as per the direction of Engineer in-charge.
Providing and laying cement 1:4:8 (1 Cement 4 approved sand 8 app. Graded stone agrregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth and as per the direction of Engineer-in-charge
Providing and laying cement concrete 1:1.5:3(1cement:1.5approved sand:3approved graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-
Foundation and plinth including entire carrige of material up to all leads and lifts.
Wall (any thickness but not less than 0.1m thickness) attached pillasters,buttresses plinth and string courses etc. from top to foundation level upto floor two level and as per the direction of Engineer-in-charge.including entire carriage ofmaterial upto all leads and lifts.
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring,shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in:-
Vertical surface such as wall of (any thickness) partition and the like including attached pillaster buttresses plinth and string courses and like and as per the direction of Engineer-in-charge .including entire carriage of material upto all leads and lifts.
Providing tor steel reinforcement for RCC work including bending,binding and placing in position complete upto floor two level.as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.
laying and jointing of GMS pipes (light grade) in scour pipe and overflow inlet and outlet 50 mm dia
Steel work welded in built up sections, trusses framed work including cutting hoisting, fixing in position and applying a priming coat of red lead paint in gratings, framed guard bars, Ladders railing, brackets and similar works with all leads and lift.
laying and jointing of GMS pipes (medium grade) in scour pipe and overflow inlet and outlet 150 mm dia
Providing and fixing double flanged cast iron sluice valve of following dia of leader Kirloskar/BIR/Kartar make as per as per IS 780 class PN 1.6 and capable of with standing the normal seat pressure as per direction off the engineer in charge
Demolition of stone masonry above GL up to floor two level including attacking of servicable material, disposal of unserviceable materials with in 20 meter lead and un-rainforced cement cocrete more than 15cm thickness.
Repair to plaster in patches of 2.5 sqm and under and 10 to 15 mm thick including cutting the patch in proper shape and replastring the surface of the wall including disposal of rubbish to the during ground with in a lead of 20 meter with cement mortar 1:6 (1 Cement 6 Sand) including all leads lifts and carriage of material and directed by the engineer in charge
Applying a priming coat over new steel and steel based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and knotting ready mixed paint brushing red lead, red oxide/ zinc oxide chrome including all leads lifts and carriage of material and as directed by the engineeer in charge.
Painting to coat (excluding priming coat) on new steel and steel based surface with ready mixed paint brushing to give an even Shade including clearing of all dirt dust and other foreign matter sand paper and stopping with ready mixed paint other than white, including all leads and lifts and carriage of material at site and as directed by the engineer in charge.
Applying a priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and knotting ready mixed paint brushing with white lead for priming including all leads lifts and carriage of material and as directed by the engineeer in charge.
Painting one coat (excluding priming coat) on new wood and wood based surface under coat with enemal and finishing coating with flat oil paint brushing to give an even Shade including clearing of all dirt dust and other foreign matter sand paper and stopping with white enemal paint, including all leads and lifts and carriage of material at site and as directed by the engineer in charge.
Cmement cocrete flloring 1:2:4 (1 Cement: sand 4 : graded stone aggregate 20mm nominal size) and laid in one layer finished with a floating coat of neat cement, 50mm thick including all leads lifts and carriage of material at site as per the direction of Engineer-in-Charge.
6mm thick cement plaster to ceiling in cement mortar 1:3 (1 Cement 3 3 sand) including all leads, lifts and carrige of material at site and as directed by the Engineer-in-Charge)
White washing with lime on undecorated wall surface to coat to give an even shade including throughly broomimg the surface to remove all dirt, dust and other foreign matter including all leads lifts and carrige of material at site and as directed by the Engineer-in-charge.
Providing and fixing Evaves board of required pattern with in all accessories including all leads, lifts and carrige of material and as directed by the Engineer-in-Charge
Steel work welded in built up sections, trusses framed work including cutting hoisting, fixing in position and applying a priming coat of red lead paint in gratings, framed guard bars, Ladders railing, brackets and similar works with all leads and lift.
Providing and fixing 0.45 cm thick pre painted steel sheet in rooffing with hot dipped metelic zinc caoted.
Providing and fixing 15cm wide 45cm overall semi circullar palin G.I Sheet gutter with iron bracket 40x3mm size bolt and nusand washers etc.
Providing and fixing 110 mm HDPE pipes.
Providing electrical fitting in pump house.
Dharmender Kumar
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .