StateplanAugmn10MLDWTPAnicadPt

Work Name:State Plan-WSS to Mallappaly, Anicad and Kottangal (part ) Panchayaths.-Augmentation of 10 MLD Water treatment plant at Anicad GP -Pipeline Work

1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)1
50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack woodcum_
50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack woodŸOD238414/2024-2025:Fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections from existing structure, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) details for 40kg 1 kilogramXOD238413/2024-2025:Providing and fixing finished brass hard drawn hooks and eyes: 70mm WOD238411/2024-2025:Providing and fixing finished brass hard drawn hooks and eyes:150 mm€OD238415/2024-2025:Providing and fixing ISI marked, S S heavy weight butt hinges with necessary screws etc. complete : 3 inch ;OD238412/2024-2025:Providing 10mm MS round bars for windowskilogramrSupply erection & commissioning of floor mouted type vaccum operated gas feed chlorinator of capacity 5 kg/hr £OD238405/2024-2025: Supply erection and commissioning of Vacuum operated brand new gas feed Chlorinator having a maximum feeding capacity up to 5 kg/hr with Auto Vacuum regulator, consist of vacuum and vent tube connectors flow control valve mounted with ‘O’ rings Chlorine inlet assembly with valve and stud, Hast-alloy C spring, Teflon seating etc. Mounted on brackets with screws, Rotametor tube assembly with Teflon float duly calibrated, injector assembly with water inlet valve, jet and throttle arrangements, gas mixing with water outlet arrangement solutions outlet system, vacuum pressure regulator / breaker fitted with neoprin ‘O’ ring, Hast alloy C spring loaded Teflon diaphragm assembly, Hast alloy C Hex nipple connection with nuts Teflon connecting tubes, glycerin filled diaphragm type chlorine pressure gauge, Vacuum pressure gauge, water pressure gauge, with necessary connection, brackets, blocks, Chlorine solution out let should be connected to the sump with pipes and fittings, Required length of best quality Teflon pipe assembly for gas flow from cylinders to the Chlorinator along with Hast alloy C connectors in both ends etc. complete.t
OD238404/2024-2025:Supply of new filled chlorine cylinder of capacity 100 kg suitable for the chlorinator unit with necessary test and explosive certificate including testing, registration chlorine filling from TCC, conveyance charges, chlorine filling charges, fitting charges and conveying to site etc complete as per the direction of departmental officers in chargePainting of WTP areaú14.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .Ô14.17: Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-ChargeŠ13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer‡13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new workFurnitures and lab chemcalsŠOD238403/2024-2025:Lab Chemicals needed for all the lab needs such as jar test, RC resting, etc as per the direction of engineer in charge