State Plan-Rehabilitation of Aruvikkara Dam

Amount

State Plan 2022 -23 - Replacement of shutters of Aruvikkara Dam

OD5374/2023-2024:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead

OD5375/2023-2024:Removing & existing hoisting mechanism and old structures and stacking in suitable place.

OD5376/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD5377/2023-2024:Design and Fabrication and supply of Hoisting bridge unit in structural steel confirming to IS2062Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc with proper safety measures, safety harness and PPEs and scaffolding units as per the site condition.

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD5378/2023-2024:Erection of the bridge including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

OD5379/2023-2024:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

OD5380/2023-2024:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

OD5381/2023-2024:Cleaning of structural steel surface of by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge

OD5382/2023-2024:Providing and fixing bolts including nuts and washers complete.

OD5383/2023-2024:Supplying and stacking of 30 Tonne capacity rope drum hoisting unit having13.5 m lift at a hoisting speed of about 0.33 m/min(+/-10%) through pulley arrangements with 4 numbers of falls on either side with 22mm tested galvanized wire rope 6/36 construction, fibre core having breaking capacity 288488Kg anddriven by TEFC squirrel cage induction motor hoist duty type having capacity not less than 5HP and driven through self locking worm reducer and open gear reduction unit excluding the cost of line shaft but including 2 nos. of plummer blocks with bearings for line shaft supported at proper intervals and including cost of electro magnetic thruster brake assembly manual operating systems, electrical accessories like DOL starters, limit switch, main switches and other safety equipments as per drawings specifications and statutory requirements etc complete but excluding cost of wire rope

OD5384/2023-2024:Conveying and Fixing wire rope already supplied to the new gates and Hoisting unit safely and conducting Trial run

OD5385/2023-2024:End wheel with brass bush and pin

OD5386/2023-2024:Providing and fixing taper roller bearing with cover details

OD5387/2023-2024:Providing and fixing side wheel with bush and pin detail for 1 set

Fabrication and fixing dummy shutter

OD7835/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD7459/2023-2024:Design and Fabrication of dummy shutter in structural steel confirming to IS2062Gr including ladder, covers for hoisting unit etc. as per approved specifications and site conditions and directions of deptl. officer at site including cost of design, labour, machinery, incidental and handling charges for fixing handrails, epoxy painting charges and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc with proper safety measures, safety harness and PPEs and scaffolding units as per the site condition.

OD7464/2023-2024: Hoisting and erection of dummy shutter including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material

OD7465/2023-2024:Dismantling and placing dummy shutter including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete

OD7926/2023-2024:Conveying and stacking dismantled shutters, MS Channel, MS Section, Wire rope, Gear box,Electric motor etc including loading unloading hire charge of machinery and truck, inherent charges within 5 km from site as per directed from departmental officers

100.98.1007:Engaging Beldar

100.52.S.1:Sub Data for providing Earth filled cement bags including cutting of the Earth, filling, conveying and placing in position.

Bidder Name

HARDWARE TOOLS AND MACHINERY PROJECTS VT. LTD