CUSTOMISED 12.00 MT HIGH MAST POLE WITH LED FLOOD LIGHT INCLUDING NECESSARY CABLES, WIRES, FITTING AND FIXTURES AT PANDYA CHOWK at MAHMEDABAD NAGARPALIKA

NAME OF WORK:- CUSTOMISED 12.00 MT HIGH MAST POLE WITH LED FLOOD LIGHT INCLUDING NECESSARY CABLES, WIRES,

FITTINGS AND FIXTURES AT NEAR PANDYA CHOWK, AT MEHMEDABAD Dist.KHEDA

Item Description Quantity Unit Total Rate

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

1 copper cable 1.1 KV grade to be erected as directed of following 20.00 Mtr. 137.36

size. (E) 3 core 2.5 Sq. mm

Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 K.A. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic

release suitable to work on A.C. supply 50 cys. with all internal

connections & complete erected in16 G.M.S. housing on angle

providing and erecting Miniature circuit breaker single pole 6A

to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

4 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 3.00 Kg 794.87

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

5 (A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs 1.00 Each 5760.03

Back filling Compound :1 no. Bag of 25 Kg.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (C) 4 core 10 Sq. mm

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

7 necessary connecting accessories of same material at required 100.00 Meter 62.62

depth in existing trench for laying of cable. below ground /

road surface for enclosing cable (A)50 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

Item Description Quantity Unit Total Rate

Supplying, erecting, testing, commissioning approved make M.S.

Polygonal High Mast Pole having following general

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN

10025 & Hot deep galvanized minimum 65/86 micron (as per

IS 2629 /1985) Lantern carriage with ring and rubber lines for

erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia S.S.

9 Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lightening

arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core ISI

copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible motor

and switchgears having door not more than 1400mm x 300mm

with waterproof gasket & hinges & locking arrangement.

(f) Pole structure comprises suitable size of reversible motor,

cable and necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports

ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including

testing & commissioning of the entire structure for following

size of High Mast poles

[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm,

No. of Sec. No. - 1, Bottom Thickness - 3 mm, Size of Base Plate -

Dia 520 mm x 20 mm thick, Foundation Bolt Size M24 x

mm, Qty - 6 Nos., Suitable for mounting Fitting of Light - 6 Nos.

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

10 embossed 160 to 270 V,Power Factor more than 0.95, THD <

%, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.

(fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

(vii)above 200 to 250 watts Cat.-III 6.00 Each 10261.6

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup

channel day clock with 14 memory programme, suitable to

operate on 240V + 5%, 16A with, floating contacts Minimum

11 switching setup time 1 minimum & LCD display. Also comprised 1.00 Each 3168.37

permanent ON/OFF switching. Programming switches &

housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as

Supplying & erecting power contactor ,AC3 duty for time switch

12 complete erected as per direction Cat III - (B) 2 pole 250V 32 1.00 Each 1883.65

Item Description Quantity Unit Total Rate

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door internally

13 supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x 5 mm

M.S. Angle of Two Nos. one is welded and other with nut and

bolt for erecting Bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS 2147 of

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 1.00 Each 3595.6

mm thick MS angle.

Making trench in Hard Murrum / Tar Road of suitable width of

90 cm or required depth for laying any size of cable or locating

the fault all over the run and back filling the same and making

the surface as normal ground.

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete

15 with cutting, welding, grinding & finishing duly painted with 180.00 Kg 77.77

one coat of red oxide with erection on site as per direction of

engineer in charge with necessary grouting, cementing,

plastering & finishing complete.