Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 CrAccepted-AOC | ₹4.4 Cr | L1 | Accepted-AOC Agreement done by the contractor |
Tender Value
₹3.6 Cr
EMD Value
₹7.3 L
Closing Date
8 Feb 2021, 3:30 pmClosed
Executive Engineer Water Services Division Ambala
Executive Engineer Water Services Division Model Town Ambala
Constructing RCC Open Trough from RD 4000 to 6000 and RD 15000 to 16000 of Mahesh Nagar drain
2021_HRY_158455_1
114/2a DATED 29/01/2021
Open Tender
Civil Works
Item-rate/Agreement basic
150 days
Ambala
Please refer Tender documents.
2 documents required · 2 mandatory
₹15,000
Yes
₹7.3 L
Yes
Executive Engineer Water Services Division Ambala
10 Mar 2021
3 Feb 2021
8 Feb 2021
3 Feb 2021
8 Feb 2021
3 Feb 2021
5 Feb 2021
Amount
Earth work excavation in ordinary soil exclusive of compensation of earth, duly dressed with all leads and lifts including breaking of clods
Earth work excavation in ordinary soil dully dressed, breaking of clods i/c loading, unloading by mechanocal means and dressed with a combined
Rehandling of recently deposited earth work (for back filling of drain)
Dressing of new Earth work or remodelling work
Extra for Slush (As per HSR Item No. 6.2(i)
Shuttering with steel shuttering for faces of concrete foundations and foundation beams (vertical or battering) A&C SLIP NO CZC-7 Dated 4-11-2010 note(1)
Centring and shuttering with steel shuttering for faces of walls, partitions, retaining walls,well steining and the like (vertical or battering)including attached pilasters etc.(as per HSR item no.9.5 + A&C SLIP NO CZC-7 Dated 4-11-2010 note(1)
Providing & laying in position machine batched and machine mixed design mix M-15 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site laying but excluding the cost of centering, shuttering,finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impariing strength and dudrability as per direction of Engineer-in-charge in foundation and plinth.(Note: Cement content considered in this item is @ 240 Kg/cum).
Providing & laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site laying but excluding the cost of centering, shuttering,finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impariing strength and dudrability as per direction of Engineer-in-charge in foundation and plinth.(Note: Cement content considered in this item is @ 340 Kg/cum).
Steel reinforcement TMT bars Fe-500 EQR/FE-500-D grade or more for RCC work, where no included in the complete rate of RCC including straightening, bending, binding, wastage , over laps, welded joints, spacer bars, chairs, stays , hangers and annealed steel wire etc and placing in position complete in all respect for all heights/depths/storeys/basements etc. Note: Reinforcement shall be measured in length including hooks, if any separately for different diameters as actually used in work, excluding overlaps, wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annelaled steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.
Providing and fixingWater Stop Seal (In base) 300mmx12mm
Providing and fixingWater Stop Seal (On Walls) 200*12 MM
Prviding , Lowering laying cutting(cut surface to be uniformly finished) jointing with rubber rings markeds with IS:5382 and testing of nspigot and Sockting Rcc NP2 900mm Dia marked with IS 498-1988 and special into trenches for all depth including carriage loading, uploading stacking handling re-handling etc. complete in all respects to the statisfaction to the engineer . 900mm dia(as per HSR item no. 28.60@ Rs 1946)
Lowering laying cutting( cut surface to be uniformity finished) jointing with rubber rings marked with IS:5382 and testing of nspigot and Sockting Rcc NP2 900mm Dia marked with IS 498-1988 and special into trenches for all depth including carriage loading, uploading stacking handling re-handling etc. complete in all respects to the statisfaction to the engineer . 900mm dia(as per HSR item no. 28.60@ Rs 114)
Removing hume pipes- Np 2& 3 above 900mm dia (as per HSR item no.8.365
Dismantling Brick work tile Masonary or tile lining and tile terracing and coping
Credit of dismantled brick work material
Credit for RCC Pipe 900 mm dia Np-2
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .