Construction of 01 No. (G plus 2) 6 unit C type Building and its allied work at the premises of Siliguri Power House Complex behind Siliguri Nodal Store under Siliguri Area Office,WBSETCL

Construction of 01 No. (G+2) 6 unit C type Building and its allied work at the premises of Siliguri Power House Complex behind Siliguri Nodal Store under Siliguri Area Office,WBSETCL

Percentage BoQ

BoQ_Ver3.0

NIT No.:- CE/(O&M)–III/SILIGURI/CIVIL/ 2025-26/05, DATED 26.12.2025

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spills within a lead of 75m as directed. The items include necessary trimming the sides or trenches, leveling, dressing and ramming the bottom, bailing out water as required complete.

a) Depth of excavation not exceeding 1.50m

b) Depth of excavation for additional depth beyond 1.5 m and upto 3m but not requiring shoring .

Filling in foundation or plinth by silver sand in layers not exceeding 150mm, as directed and consolidating same by through saturation with water ramming complete, including the cost of supply of sand.

a) Medium coarse sand

Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration ) with water by weight at the rate of 5 litres per sq,m of the surface before sand bed or sub grade is laid . Holes upto 50 mm to 75 mm deep at 150 mm centre to centre both ways shall be made with 12 mm , diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion . The work shall be carried out as per specification described in para 6.4 of code IS-6313(part -II) 1981

Dismantlling all types of masonry excepting cement concrete plain or reinforced,stacking serviceable materials at site & removing rubbish as directed within a lead of 75 M .

i)In ground floor

Dismantling all types of plain cement concrete work , stacking servicible material at site and removing rubbish as directed within a lead of 75 mm including stacking of steel bars.In ground floor including roof.

a)upto 150 mm thick

Dismantling R.C. floor, roof, beams etc. including cutting rods & removing rubbish as directed within a lead of 75m including stacking of steel bars.

i) In grond floor.

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Brick work with Ist class bricks in cement mortar (6:1 )

(a) In foundation and plinth

(b) In superstructure (i) Gr floor

(ii) 1st floor

(iii) 2nd flloor

(iv) In 3rd floor

125 mm th. Brick work with 1st class brick in cement mortar (1:4) (i) In gr floor.

(ii) In 1st floor

(iii) In 2nd floor

(iv) In 3rd floor

Ordinary Cement Concrete (mix 1:11/2:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, as per relevant IS codes. a) River bazree (i) In Ground floor.

(i) In 1st floor

(ii) In 2nd floor

(iii) In 3rd floor

Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety. (a) 1:3:6 proportion

i) In Ground floor

Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm.dia rod complete including mending damages. Payment for damage and repair to be made separately.

R.C. shelves (1:1.5:3) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8% main and 0.2% distribution bars), shuttering etc. and 10 mm. thick cement plaster (1:4) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages as necessary complete.(a) 50 mm. Thick panels.SAIL/ TATA/RINL

i) In ground floor.

ii) In 1st floor

iii) In 2nd floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)

(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.(i) In Ground floor

(ii) In 1st floor

(iii) In 2nd floor

(iv) In 3rd floor

(b) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work (i) In ground floor

(ii) In 1st floor

(iii) In 2nd floor

(iv) In 3rd floor

(c) 25 mm to 30 mm shuttering without staging in foundation) i) In ground floor

Hire and Labour Charges for shuttering with hard wood for precast R.C. Slab curved, or stright and striking out the same including fitting, fixing the precast slab in position with necessary carriage and haulage, hosting etc,complete in all respect.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

a) For works in foundation, basement and upto roof of ground floor/upto 4M

i) Tor steel/Mild steel SAIL/TATA/RINL

(i) In gr floor.

(ii) In 1st floor

(iii) In 2 nd floor

(iv) In 3rd floor

Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)

Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades.

25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed

Supplying and laying polythene sheet (150 gm/ sq.m. ) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches .

Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar(1:2) including making suitable arrangements to hold thestones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of allmaterials, labours, scaffolding, staging ,curing androughening of concrete surface complete. [Using cement slurry at back side of tiles@ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]

i) In Ground floor

ii) In 1st floor

iii) In 2nd floor

Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {Whitecement and Pigment to be supplied by the Agency] Area of each Slab/tile upto 0.3 sq.m.With Makrana plain pink / Adranga Pink / Garbh Gulabi/ Udaypur pink / Udaypur Green / Black Bhaslana

i) In ground floor

ii) In 1st floor

iii) In 2nd floor

Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone.

Supplying & laying true to line and level vitrified tiles of approved make ( size not less than 600 mm x 600 mm x10 mm th ) in floor skirting etc set in 20 mm sand cement mortar (1:4) and 2 mm th cement slurry back side of tiles using cement 22.91 kg / m2 or using polymerised adhesiv (6 mm th layer applied directly over finished artificial stone floor/mosaic etc without any backing course ) laid after application slurry using 1.75 kg of cement per sq m below mortar only, joints grouted with admixture of white cement and colourng pigment to match with colour of tiles / epoxy grout material of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of material , labour and all other incidental charges complete true to the manufacturers specification and direction of E.I.C. ( With cement , synthetic adhesive and grout material to be supplied by the contractor. )

With application slurry 1.75 kg / sq m ,20 mm sand cement mortar (1:4) & 2 mm th cement slurry at back side of tiles , 0.2 kg / sqm white cement for joint filling and pigment.

Light colour

i) In Ground floor

ii) In 1st floor

iii) In 2 nd floor

Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge.

i) In ground floor

ii) In 1st floor

iii) In 2nd floor

Supply and laying true to line and level 20 mm /25 mm th. Precast roof tiles made of cement concrete with stone chips as per approved strength and density set in 25 mm avg th. Cement mortar (1:3) and filling up joints (3 mm wide ) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg per sqm back of tiles and then setting close the precast tiles , finishing up the joints with slurry already laid and finally finishing the top surface including providing 150 mm high skirting with the same tiles flushed with the inside surface of parapet wall , finishing the mouth of rain water pipe , curving etc. as necessary complete as per direction of the E.I.C

a) For 25 mm th. Precast tiles (cement 14.6 kg /Sqm underlayer)

(i) In 2nd floor

M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.

M.S. or Ornamental grill of approved design joints continuously welded with M.S W.I flats and bars of windows railing etc fitted and fixed with necessary screws and lugs.

Grill weighing above 10 kg/ sq m and upto 16 kg /sq. m

i) In Ground floor

ii) In 1st floor

iii) In 2nd floor

Collapsible gate with 40 mm x40 mm x 6 mm Tee as top and bottom guide rail ,20 mm x 10 mm x2 mm vertical channels 100 mm apart in fully stretched position 20 mm x5 mm M.S. flat as collapsible bracing properly rivetted and washered including 38 mm steel rollers including locking arrangement , fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes chasing etc. in walls floor etc. and making good damages complete. i) In Ground floor

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx).

Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering & ramming etc. layer by layer complete.

(a) With earth obtained from excavation of foundation

Wood work in door & window frame fitted & fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete , Iron Butt hinges and M.S.Clamp.

a) Sal (Siliguri)

i) In ground floor

ii) In 1st floor

iii) In 2nd floor

Supplying fitting fixing in position of approved P.V.C. door frame (matt finish ) made of extruded P.V.C. multichamber hollow section having dimensions 60 mm x 50 mm x2 mm , horizontal section will be joined with vertical section by galvanuized steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges , one steel tube 40 mm x 20 mm x 1.20 mm will be inserted on one full vertical side of the frame ( hinge side ) as reinforcement , the frame will then be fixed in the opening with the help of P.V.C. expanable fastner wooden gutties and galvanised steel screws including cost of all materials and labours , hire charges of tools and appliances, carriage of all materials , taxes and all other incidental charges complete.

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings (a) 35 mm thick shutters (single leaf)

i) In ground floor

ii) In 1st floor

iii) In 2nd floor

PVC door shutter -30 mm thick . Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete.

i) Ground floor

ii) In 1st floor

iii) In 2nd floor

Supplying fitting and fixing hinge cleat in position excluding the cost of hinge and other fittings.

a) with 75 mm iron butt - hinge

i) Siliguri sal

Supplying fitting & fixing M.S. clamp for door & window frame made of flat bent bar , end bifurcated with necessary screws etc by cement concrete (1:2:4) as per direction . (Cost of concrete will be paid seperately.)

(a) 40 mm x 6 mm, 125 mm length.

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.

Door stopper.(Brass)

Anodised alluminium barrel/tower/socket bolt (full covered) of approved quality manufactured from extruded section conforming to I.S. 204/ 74 fitted and fixed with cadmium plated screws.

i) 300 mm long x 12mm dia bolt

ii) 150mm long x 10mm dia bolt

Anodised alluminium Aldrop/ sliding bolt of approved quality manufactured from extruded section conforming to I.S. specification (2681/66) fitted and fixed complete.

i) 300 mm x 16 mm dia bolt.

Anodised alluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S 205/ 66 ) fitted and fixed with cadmium plated screws.

i) 100 mm x75 mm x4mm

Anodised aluminium D type handle of approved quality manufactured from extruded section conforming to I.S specification( I.S 230/72) fitted & fixed complete. (a) With continuous plate base (Hexagonal/ Round rod)

i) 125 mm grip x 10mm dia rod.

(a) Metallic magic eye of approved quality fitted and fixed complete.

125mm long wooden buffer block:Sal :Siliguri

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] 16mm

i) In Ground floor

ii) In 1st Floor

iii) In 2nd floor

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof.Glossy/Matt/Suede excluding surface texture or metallic lustre Thickness of laminate 1 mm

(i) In Ground floor

ii) In 1st floor

iii) In 2nd floor

Labour for chipping of concrete surface before taking up plastering work

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off of chamfering corners as directed and raking out joints or roughening of concrete surface including throating, nosing and drip course where necessary

i) With 6:1 cement mortar,

a) 20 mm thick plaster.(Inside plaster)

(i) In gr floor.

(ii) In 1st floor

(iii) In 2 nd floor

(iv) In 3rd floor

b) 15 mm thick plaster.(Outside plaster)

i) In gr floor.

ii) In 1st floor

iii) In 2 nd floor

(iv) In 3rd floor

ii) With 4:1 cement mortar,

a) 10mm thick plaster.

i) In gr floor.

ii) In 1st floor

iii) In 2 nd floor

(iv) In 3rd floor

Neat cement punning about 1.5mm thick in wall dado, window, sills, floor, drain etc.

Applying Interior grade Acrylic primer of approved quality and brand on plastered surface or concrete surface old or new to receive Distemper/Acrylic emulsion paint including scraping and preparing the the surface thoroughly, complete as per manufacture's specification and as per direction of E.I.C.One coat

a) Water based Interior grade Acrylic primer.

i) In gr floor.

ii) In 1st floor

iii) In 2 nd floor

iv) In 3rd floor

Applying Exterior grade Acrylic primer of approved and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturers specification and as per direction of E.I.C (One coat)

i) In Ground Floor

ii) 1st Floor

iii) In 2nd floor

iv) In 3rd floor

Protective and decorative Acrylic exterior emulsion paint of approved quality as per manufacturers specification and as per direction of E.I.C.to be applied over a coat of acrylic primer as required. The rate includes the cost of material,labour, scaffolding and all incidental charges but excluding the cost of primer. Manufacturer following are the approved manufacturer. i) Two Coats a) Premium 100% Acrylic emulsion. (a) Berger Paint (b) Asian Paint (c) ICI (d) Nerolac (e) Shalimar

i) In Ground floor

ii) In 1st floor

iii) In 2nd floor

iv) In 3rd floor

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.

Priming one coat on steel or other metal surfacewith synthetic oil bound primer of approved quality including smoothening surface by sand papering.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface , if necessary.

a) On timber or plastered surfaceWith super gloss (hi gloss) i) Two coats (with any shade except white)

b) On steel or other metal surface: With super gloss (hi gloss) i) Two coats (with any shade except white)

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty. Two coats. a) Standard quality.

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5mm thick)

Supplying fitting fixing C.I.grating heavy type

a) 100 mm dia square/ round.

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.

A) UPVC Pipes:110 mm. Dia.

B) UPVC Fittings:Shoe 110mm Dia

Supplying profiles of reuired section made of Aluminium Alloy extrusions confirming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour /natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding & casement windows, partition, formed of basic section of any ISI embossed/certified make and brand as per direction of Engineer-in-charge.

In 10-12 Micron thicness Annodizing film. Natural white

a) 2 track sliding window

i) Bottom frame

ii) Top & side frame

b) 3 track sliding window

i) Bottom frame

ii) Top & side frame

c) Shutter for all track sliding window

i) Bottom & Top member

ii) Style side member

iii) Interlock member

d) Louvered window

i) Top, bottom & side member

ii) Louvered Section

Labour charge for fabrication and installation of composite door, window, partiotios made from annodized extuded alloy aluminium sections.

Glazed aluminium windows made of extruded and annodized alloy aluminium sections, fabrications, including citting to proper shape and size,drilling and alignment of window shutter frame fitted within built locking arrangements,sliding rollers and other necessary fittings fixture,adhesives and joineries along with extuded neoperine or EPDM gasketing in between window frame and masonarywork(wall, column, beanm,lintel etc.)as well as between glass and shutter frame for fixing the glass and poly shulphate sealent and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing ,specification and direction of E.I.C. The rate includes the hire chjarge of all tools and plants ,including all incidental charges ,adhesive,joineries such as screw,cleate angle etc. but excluded the cost of extruded aluminium section ,glass ,neoprene/EPDM gasketing, locking arrangement and rollers.

a) 2 track sliding window

i) In ground floor

ii) In 1st floor

iii) In 2nd floor

b) 3/4 track sliding window

i) In ground floor

ii) In 1st floor

iii) In 2nd floor

c) Louvered window

i) In ground floor

ii) In 1st floor

iii) In 2nd floor

Supplying EPDM gusket of approved make and brand as per direction of Engineer in Charge.

i) For Sliding Windows

a) T shaped EPDM gasket for frames

b) U shaped EPDM gasket for frames

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987

i) 6 mm thick clear glass.

ii) 6 mm thK. coloured /tinted /smoke glass

Supplying PVC rollers for sliding windows as per direction of E.I.C

Supplying maruti lock (100mm)

Supplying fitting and fixing brass ferrule including connection with G.I pipe of TATA make of following dia and upto 450 mm long with screw , jamnut , socket etc. complete in all respect , including cutting trenches in all sorts of soil and filling up the trenches as per direction of the EIC

i) 25 mm dia

ii) 20 mm dia

Supplying fitting and fixing shower of approved brand and make.

(i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand)

Supplying fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq cm.

iii) 32 mm

Supplying fitting & fixing bib cock or stop cock.

(i) Chromium plated bib cock short body ( Equivalent to Code no. 511 & Model - Tropical / Sumthing special of ESSCO or similar brand.

(ii) Chromium plated stop cock ( Equivalent to Code no. 513 (A) & 513 (B) & Model - Tropical / Sumthing special of ESSCO or similar brand.

iii) Chromium plated angular stop cock with wall flange ( Equivalent to Code no. 5053 & Model - Florentine of jaquar or similar brand.

Chromium plated Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)

(a) For Exposed Work

iii) 25mm

(b) For Concealed Work

iii) 25mm

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc.fitted including cost of all materials, jointing materials, cutting pipes,making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories,specials.) PVC Pipes

iii) 50mm

Supplying, fitting and fixing 10 litre P.V.C low down cistern confirming to I.S. specification with P.V.C. fittings complete. C.I. brackets including two coats of painting to brackets etc.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (black) - Multilayer

a) 1500 litre capacity

Labour for hoisting plastic water storage tank.

Above 1500 litre upto5000 litre capacity.

i) Upto 1st storey from G.L.

ii) 1st storey to 2nd story.

iii) 2nd storey to 3rd story

Labour for punching hole in plastic water storage tank upto 50 mm dia .

Supplying ,fitting &fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75mmx75mm wooden blocks ,C.P. waste fittings of 32mm dia, one approved quality brass C.P. pillar cock of 15mm dia,C.P. chain with rubber plug of 30mm dia., approved quality PVC waste pipe with CP nut ,32mm dia., 900mm long approved quality PVC connection pipe with heavy brass CP nut including mending good all damages and painting the brackets with two coats of approved paint.

a) 550mmx400mm size

Supplying fitting and fixing pedestral of approved make for wash basin .(White)

Supplying fiting and fixing 32 mm dia Flush pipe of approved make with necessary fixing materials and camps complete .

i) Polythene flush pipe

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.

i) 630 mm X 550 mm X 180 mm

Supplying, fitting and fixing 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand).

Supplying,fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.

i) 1050 mm long

CP Wall Mixture without spout but with provision for connnection toTelephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand).

Supplying, fitting & fixing Aluminium domical grating (i) 100mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992

A) i) Single Socketed 3 Meter Length, 110mm

ii) 75 mm Single Socketed 3 m length.

B)Fittings

i) 110 mm Coupler

ii) 110mm Door tee

iii) 110mm Bend 87.5

iv) 110mm Vent Cowl

v) P Trap(110X110)

Supplying fitting fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts , nuts etc.

i)With P trap

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).

i)580 mm X 440 mm

Supplying fiting and fixing Closet seat of approved make with lead and C.P. hinges , rubber buffer and brass screws complete

(a) E.W.C.Plastic (hollow type ) White

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specification supported on fibre glass frame of any colour, frame size 550mmx400mm.

Supplying fiting and fixing glass shelf with aluminium guard rail. A) Ordinary type with 5.5 mm sheet glass.

i) 450mm x 125 mm

Supplying fiting and fixing soap holder. A) PTMT (Prayag )

Supplying fiting and fixing towel rail with two brackets. a) C.P. over brass

i) 25 mm dia and 600 mm long.

High pressure polythene ball cock of approved quality with polythene ball and aluminium lever complete for pipe of dia 25 mm dia.

Constructing Inspection pit of inside measurement 600 mm x600 mm x upto 600 mm (depth) with 250 mm th 1 st class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm th cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling , 15 mm th cement plaster (1:4) to inside walls and outside walls upto G.L.and 20 mm th (1:4) plaster to the bottom of the pit , providing necessary invert with cement concrete (1:3:6) with stone chips as per direction , neat cement finishing to entire internal surface, top of pit covered with 100 mm th R.C.C slab (1:1.5:3) with stone chips and necessary reinforcement upto 1% and shuttering including 6 mm th cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia R.C.C. manhole cover of approved make supplied , fitted and fixed in the slab with necessary fittings , necessary earthwork in excavation in all sorts of soil , filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.

i) With Bazree (N.B Variety) (JSW/ JSPL/SHYAM/ SRMB/ BMASL/ ELECTROSTEEL/SSL)

Construction of septic tank of different capacities as per approved drawing with 1 st class brick work in cement mortar (1:4) including two 560 mm dia R.C.C. manhole cover (heavy duty ) of approved make supplied fitted and fixed in the 100 mm th R.C.C (1:1.5:3) top slab with necessary fitting , 20 mm th cement plaster (4:1) with neat cement finish to the internal surfaces and 15 mm th cement plaster (4:1) to the outside wall upto 200 mm below G.L. floor finished with 25 mm th grey artificial stone over 100 mm th R.C.C. (1:1.5:3) bottom slab including supplying fitting and fixing all necessary specials , fitting S.W. tees , C.I. foot rest etc. including excavation earth in all sorts of soil , shoring , bailing out and pumping out water as necessary , ramming , dessing the bed and refilling the sidesof the tank with earth , removing spoils , filling up the chamber with clear water , removing forign materials from the chamber and including constructig attached inspection pit as per approved drawing and connecting all necessary pipes , joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all cost of labour and materials.

For 50 users

i) With River Bazree( N.B variety) (JSW/ JSPL/SHYAM/ SRMB/ BMASL/ ELECTROSTEEL/SSL)

Construction of circular soak well 2.5 M deep in all type of sandy soil with dry brick work upto 1.6 M from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.9 m from top with 20 mm th. Cement plastering (1:4) to inside face upto the depth of cement brick work , 15 mm th. cement plaster on outer face from top of well upto G.L. and 6 mm th. cement plaster (1:4) on top of the R.C.C cover slab including filling bottom 1.00 M of inside of the well with brick metal ( 50mm to 63 mm size ) including R.C.C. cover slab of 100 mm th with cement concrete (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C manhole cover (heavy type ) of approved make supplied , fitted and fixed in the cover slab with necessary fitting , making necessary arrangement for pipe connection , excavation of well including shoring , dewatering and removing the exess earth from the premishes as per direction complete in all respect with all cost of labour and materials .

With 250 mm th. dry brick work and 250 mm th. cement brick work (6:1) and 1.00 m inside dia.

for JSW/ JSPL/SHYAM/ SRMB/ BMASL/ ELECTROSTEEL/SSL

Labour charge for fitting and fixing UPVC pipe for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials , cutting pipes , cutting holes in walls or R.c. floor where necessary and mending good all damages excluding the cost of masonry or concrete work if necessary but including the cost of fitting and fixing holder bat clamps or for under ground work including cutting trenches upto 1.5 m and refilling the same complete as per direction of E.I.C

(A) Above ground i) 75 mm dia

ii) 110 mm dia

(B) Under ground 110 mm dia

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.