REPAIRS TO PLINTH PROTECTION, COMPREHENSIVE MAINTENANCE AND CONNECTED WORKS AT AFS BIDAR

Amount

Preparing old decorated surfaces of wall surfaces by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of white wash, complete all as specified and as directed.

Preparing old decorated surfaces of ceiling surfaces by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of white wash, complete all as specified and as directed.

Complete removal of existing treatment on old decorated of wall surfaces, providing material and labour for 2 mm thick wall care putty and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed by Engr-in-Charge.

Preparation of old surfaces by washing, rubbing down & stopping of distempered & painted surfaces, providing material and labour and applying one coat of oil bound distemper on wall (of approved shade) complete all as specified and directed.

Preparation of old surfaces by washing, rubbing down & stopping of distempered & painted surfaces, providing material and labour and applying one coat of oil bound distemper on ceilings (of approved shade) complete all as specified and directed.

Preparation of old painted wood and wood based surfaces of any discription over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, first quality complete all as specified and as directed.

Preparation of old painted steel and iron surfaces of any discription over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, first quality complete all as specified and as directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc., complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material & Labour for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded stone aggregate as in plinth protection etc, finished even and smooth without using extra cement including joints filling with sealing compound Grade "A" complete all as specified and directed.

Material & Labour for 100 mm thick PCC 1:3:6, type C-2, using 40 mm graded stone aggregate as in pavings, path, hardstanding, etc finishing surfaces fair and even complete all as specified

Material and labour, for plain cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in copings, bed blocks, kerb stones, etc., including necessary form work complete all as specified and as directed.

Material & Labour for Rendering 5mm thick on fair faces of concrete surface of ceiling in CM 1:3, surface finished even and smooth surface without using extra cement complete all as specified and as directed.

Material & Labour for Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed.

Taking up or down of 15 mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), Supply & Fixing GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 15 mm dia bore complete all as specified and as directed.

Taking up or down of 20 mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), Supply & Fixing GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 20 mm dia bore complete all as specified and as directed.

Supply & Fixing Rotational moulded polyethene water storage tanks 1000 lit capacity (cylindrical vertical with closed top), double layered, hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank,including 20mm Ball Valves, 20mm Tank nipple, complete all as specified and as directed.

Supply & Fixing Rotational moulded polyethene water storage tanks 500 lit capacity (cylindrical vertical with closed top), double layered, hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank,including 20mm Ball Valves, 20mm Tank nipple, complete all as specified and as directed.

Material & Labour for Disconnecting existing tanks exc 250 & n.exc 500 ltr of capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed.

Material & Labour for Disconnecting existing tanks exc 500 & n.exc 1000 ltr of capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed.

Supply and Fixing in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and as directed. Make: Prayag or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs PVC OH tank covers for 500/1000 ltrs fixing with suitable arrangement complete all as specified and as directed.

Supply and Fixing in repairs Vitreous China squatting Pan 'Orissa' Pattern size 580 x 440 mm white with integral foot rest , P or S Trap, and lime concrete bedding complete making good disturb ground complete all as specified and as directed. Make: Prayag CAT No. 4055 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe complete all specified and as directed. Make: Prayag CAT No. 4017 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and as directed. Make: Prayag CAT No. 701 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Vitreous China, white, Wash Hand Basins, size 550 X 400 mm (Flat Back or Angle Back type) including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long, a Pair of Angle iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. Make : Prayag or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Stainless steel sink (glossy) made out of 1.00mm thick (304 grade steel) sheet for kitchen with plug, washers, waste pipe, connecting union overall size 495mmx420mm with bowl size 410mmx330mmx160mm including 32mm bore PTMT Waste coupling, fixing in cement mortar on to dwarf wall or fixing cantilever brackets complete all as specified and as directed. Make : Prayag or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 500cm long and 125cm wide with chromium plated bracket guard and railing completeall as specified and as directed. Make: Prayag CAT No. BEA-45 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Brass CP 15mm bore centre hole basin mixer Hot & Cold water Pillar taps complete all as specified and as directed. Make: Prayag CAT No. 8350 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 15mm bore chromium plated cast copper alloy Bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule with wall flange, complete all as specified and as directed. Make: Prayag CAT No. 8306 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 15mm bore chromium plated cast copper alloy Bib taps (two way) fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule with wall flange, complete all as specified and as directed. Make: Prayag CAT No. 8312 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Brass CP Health Faucet with 1.5 m SS Chrome plated tube & hook complete all as specified and directed. Make: Prayag CAT No. BEA-81 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 15mm dia angle stop cock with wall flange, fancy type of chromium plated complete all as specified and as directed. Make: Prayag CAT No. 8510or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs CP Pillar cock 15mm dia bore screwed down pressure complete all as specified and as directed. Make: Prayag CAT No. 6502 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Brass CP 15mm bore centre hole basin mixer Hot & Cold water Pillar taps complete all as specified and as directed. Make: Prayag CAT No. 8350 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed. Make: Prayag CAT No. BS-69 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs tubular towel rail 20mm dia D type 60cm long between flanges chromium plated all as specified and directed. Make: Prayag CAT No. BA-40 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs plastic water closet seat black/white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminium device complete all as specified and as directed. Make : Prayag or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Toilet paper Holder of chromium plated complete all as specified and as directed. Make: Prayag CAT No. BA-08S or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Stainless steel Soap dish complete all as specified and as directed. Make: Prayag CAT No. BA-05S or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs SS grating 100mm dia complete all as specified and as directed. Make: Prayag or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs PVC connection 450mm long of 15mm bore with pair of brass check nuts , complete all as specified and as directed. Make: Prayag oor Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs PVC waster pipe 32mm bore of length 900mm for WHB/Sink/Urinal etc. complete all as specified and as directed. Make: Prayag or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs, 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

Supply and fix in repairs stainless teel auto closing hinges for fixing to cabinet doors with self closing mechanism for closing smoothly complete all as secified and as directed.

Supply and Fixing in repairs stainless steel 25mm dia Curtain rods with finial supports etc, with wall thickness not less than 1.2 mm, complete all as specified and directed .

Supply and Fixing in repairs 25mm dia cromium plated fancy type decorated approved design brackets with end sockets to hold the curtain rod properly complete all as specified.

Supply and Fixing in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescomplete, complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Material and Labour for sheet glass 4mm thick ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

Material and labour for providing Pre-cast cement concrete block masonry with Grade 'C' solid block, not exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part-I) 2005 and set in CM 1:6 complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L Vitrified ceramic tiles 8-9 mm thick light shade (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 all as directed by Engineer in charge.

M&L Vitrified ceramic tiles 8-9 mm thick light shade (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 10 mm thick backing coat in CM 1:4 all as directed by Engineer in charge.

M&L Coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 all as directed by Engineer in charge.

M&L Coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, as in floorings set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 all as specified and as directed by Engineer in charge.

M&L Coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 10 mm thick backing coat in CM 1:4 all as directed by Engineer in charge.

M&L Coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 all as directed by Engineer in charge.

S&F Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick rendering in CM 1:4.etc,all as directed by Engineer in charge.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land.

Material and Labour for Granite (of any type) 18-20 mm thick, work table, rubbed and polished in steps, jambs, piller, window cills, cooking platforms and like including pointing in white cement (1:2),with admixtures of pigment to match with shade of granite complete all as specified and as directed.

M&L in repairs PVC (SWR) floor trap 75mm dia plain with CP grating including jointing with solvent cement etc complete, fixed in repair complete all as specified and directed

S&F in repairs 110mm dia PVC (SWR), type 'B' pipes, single socketed in any length with rubber joints fixed to walls/floor, with clamps etc complete all as specified and directed

S&F in repairs 75 mm dia PVC (SWR), type 'B' pipes, single socketed in any length with rubber joints fixed to walls/floor, with clamps etc complete all as specified and directed

S&F in repairs PVC (SWR) bends 110mm dia any radius with access door complete all as specified and directed

S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 including necessary form work, complete all as specified and as directed.

Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking bending spirally for handle, rungs and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, as in cover slabs all as specified and as directed by engineer-in-charge.

Siddique constructions (BID ID -3252486)