REPAIR AND MAINT OF FURNITURE FOR CANING, POLISHING AND MISC WOODEN

Amount

ALMIRAH LARGE STEEL WITH SHELVES, ALMIRAH STEEL ( FD-1031 & 1033)

Removing UNSV shelves from almirah Large steel & S & F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/ nuts & bolts complete all as specified and directed

Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern , with duplicate and key & hole cover and all as specified and directed .Make:Godrej/Link/or Equivalent

Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed.Make:Godrej/Link/or Equivalent

Removing UNSV locking assembly & S & F new locking assembly with cover complete all as specified and directed .

Removing UNSV hanging rod & S & F new hanging rod 20 mm dia , 16 Guage thick made of stainless steel conduit pipe with sockets complete all as specified and directed .

M & L for denting & painting of Almirah large steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed .Make:Asian Paint/Jonson & Jonson/Shalimar

ALMIRAH MEDIUM STEEL W/SHELVES : FD-1032

Removing UNSV shelves from almirah Medium steel & S & F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/ nuts bolts complete all as specified and directed.

Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern , with duplicate and key & hole cover and all as specified and directed.Make:Godrej/Link/or Equivalent

Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed.Make:Godrej/Link/or Equivalent

Removing UNSV locking assembly & S & F new locking assembly with cover complete all as specified and directed.

M & L for denting & painting of Almirah Medium steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed.Make:Asian Paint/Jonson & Jonson/Shalimar

LOCKER BED SIDE STEEL

M & L for denting & painting of locker bed steel both internally and externally with synthetic enamled paint of silver/grey colour with spray gun after properly smoothiening the steel surface with the help of sand paper/electric grinder applying putty on dents and providing a coat coat of complete all as specified and directed .Make:Asian Paints/ JENSON & NICHOLSON PAINTS/Shalimar

Removing UNSV & S&F hasp & staples 75mm long as per drg complete all as specified and directed.

Removing UNSV & S&F MS steel CP handles 100mm as per drg complete all as specified and directed .Make:Godrej/Link/or Equivalent

Removing UNSV & S&F stainless steel conduit pipe 20 mm dia as a hanging rod 16 guage thick as per drg complete as specifed and directed.

Removing UNSV & S&F new shelves made out of 1mm thick plain sheet allas per drg complete as specified and directed.

Repair of Bed Hard (MAP)

M & L for removing old underviceable Ply wood top from Bed hard (MAP) and S & F new plywood top 12mm thick BWR Gde of size 1900x850mm with suitable nut & bolt and all as specified and directed .Make:Kitply/Centuryply

M & L for welding to the broken long rail stiffiner and leg stiffiner existing Bed Hard (MAP) with suitable welding rod all as specified and directed.

REPAIR OF CHARPOY GI PIPE FD-220

Removing old unserviceable nylon newar from charpoy GI pipe and S & F 12mm thick BWR Gde plywood commercial type of size 1980x900mm to charpoy GI pipe frame by providing 03 Nos of flat Iron at equal distance size 40mm wide X 6mm thick and length shall be provided by existing charpoy GI and flat Iron shall be fixedt tightly to Chapoy GI with the help of suitable nut,bolt & washer of size 62-65 mm & 6 mm dia by drilling holes into GI Pipe alongwith any welding if required . The plywood shall be fixed on the charpoy by drilling 16 Nos holes (03 Nos on each long rail, 2 Nos on each Short rail & 2 nos on each iron flat) & fixing with nut bolt along with suitable washers of size 62-65mm and 6mm thick and all as specified and directed by.Make:Kitply/Centuryply

M&L for removing unserviceable three way elbow 32 mm dia and S & F new three way elbow 32 mm dia medium grade (ISI marked) and all as shown on drg.

M&L for removing unserviceable check nuts of 32 mm dia and S & F new check nuts 32mm dia of best quality and all as shown on drg.

M&L for removing the threadless/broken long rails from charpoy GI Pipe 32 mm dia and supply and fix new long rail made of 32 mm dia GI Pipe medium grade 1.88 mtr long threaded at both ends and fix to existing three way elbow 32 mm dia and all as shown on drg.Make:-Prakesh Surya/Jindal/Tata

Taking out existing old broken short rail from Charpoy GI 32mm dia and providing in position 2 Nos short rails made out of old broken long rail obtained from taking down above item No. 5.04 ncluding threading on both ends complete fixing all as specified and shown on drg. ( Note : U/s check nuts to be replaced in above item & measured and paid as supply only under relevent item).

Taking out existing old broken legs from Charpoy GI 32mm dia and providing in 1 Nos new legs in position made out of old broken short rails obtained from taking down above item No. 5.05 and S&F 3mm thick 40mm dia MS plate welded at bottom of leg and including threading on top portion end complete all as specified and directed .

M&L for removing the old unserviceable Nylon Newar from charpoy GI Pipe 32 mm dia and Supply & reweaving with white colour new nylon newar 50 to 55mm wide closely double knitted and complete all as specified and directed by Engr -in- Charge. (Weight of nylon newar shall not be less than 1.50 Kgs per charpoy). Make:Mangaldeep

M & L Welding to the dislocated iron flats of charpoy GI pipe earlier converted to Plywood top to the long / short rails

M & L removing old unserviceable plywood /MDF board top from the Charpoy GI pipe and S & F with new 12mm thick BWR Gde plywood commercial type of size 1980x900mm and all as directed.Make:Kitply/Centuryply

CHAIR COMPUTER, CHAIR REVOLVING, EXECUTIVE (HIGH)/LOW BACK), CHAIR REVOLVING WITH & W/O ARMS TP (Make & Model No-GODREJ-PCH-7001, DELITE HI-TECH, FD/E6/MAP/01, DELITE HI-TECH)

Removing UNSV & S & F new seat & back made out of 12mm thick hot pressed plywood duly upholstered with fabric & moulded polyurethane foam and the back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 50mm thick for seat & 50mm thick for back alongwith the fabric of approved quality & colour complete all as specified and directed .

Removing UNSV & S & F castor wheels heavy duty as per the approved sample complete all as specified and directed .

Removing UNSV & S & F new handrest matching with existing all in shape,size,material & quality complete all as specified and directed. .

Removing UNSV & S & F new pedestal assembly matching with existing all in shape,size & quality complete all as specified and directed.

Removing UNSV & S & F new synchro tilting mechanism complete all as specified and directed.

M & L for servicing the gas lift mechanism for making the seat adjustment functional.complete all as specified and directed.

Chair writiing, chair visitors : (FD/E6/MAP/12, DELITE HI-TECH & GODREJ & GEEKEN)

Removing UNSV & S & F new seat & back made out of 12mm thick hot pressed plywood duly upholstered with fabric & moulded polyurethane foam and the back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 50mm thick for seat & 50mm thick for back alongwith the fabric of approved quality & colour complete all as specified and directed.

Removing UNSV & S & F new handrest matching with existing all in shape,size,material & quality complete all as specified and directed. .

Repair of Chair CB Steel with Arms : FD-75(M)

M & L for removing unserviceable seat from chair CB steel with arms and S & F new seat made out of 2nd class hard wood and canned with 2mm to 2.50mm wide and 0.4mm thick plastic cane white colour and 4mm wide 0.6mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and all as specified and as directed.

M & L for removing unserviceable back from chair CB steel with arms and S & F new back made out of 2nd class hard wood and canned with 2mm to 2.5mm wide and 0.4mm thick plastic cane white colour and 4mm wide 0.6mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the back, and all as specified and as directed.

M & L for removing unserviceable/broken arms from chair CB steel with arms and S & F new arms made out of first class teak wood and handle shall be black polished and fixed to the chairs CB steel with arms with suitable wooden screws, and all as specified and as directed .

M & L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green/smoke gray shade approved quality over a coat of red oxide primer and all as shown on Drg.

REPAIR OF CHAIR VARANDAH :-FD-256/259/359

M & L for removing broken/ unserviceable cane from both seat & back of Chair Varandah and Recanning the same with best quality plastic cane 5mm wide and 0.60 mm thick of approved make after cleaning throughly all the surfaces of chair including required welding work for broken frame whereever required and redusting and applying two coat of synthetic enamel paint white colour over a coat of red oxide primer of approved make and providing suitable hard rubber shoes 4 Nos approved quality for each chair and all as specified and as directed.Make:Maharashtra/Premier

TABLE OFFICE CLERK STEEL : FD-1004 & 84

Removing UNSV top & S&F new top made out of prelaminated particle board 18mm thick exterior gde as approved shade and 6mm thick first class teakwood edging fixed with all around the top & edging polishing with matching the colour of top complete all as specified and directed.

Removing UNSV & S&F new drawers made out of 1mm thick plain sheet shape and size all as per drg complete as specifed and directed.

Removing UNSV locks from & S & F new 6 levers locks, Godrej pattern (Make-HARRISON/GODREJ/LINK), with duplicate and key & hole cover and all as specified and directed.

M & L for denting & painting of Table office clk steel to external surfaces and drawer & drawer cabinet to external & internal surfaces with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed.Make:Asian Paint/Jonson & Jonson/Shalimar

Removing UNSV & S&F best quality hard rubber shoes to legs complete all as specified and directed.

CHAIR DINING - FD-228,262,279 & 1105 :- S & F of following existing old broken wooden components of chair dining similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge.

Top back rest

Bottom leg stiffener

Front legs

Rear Legs

Seat Member/Seat Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair dining by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

CHAIR EASY: FD-229 & 358 :- S & F of following existing old broken wooden components of chair Easy similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge.

Rear legs

Front Legs

Seat bottom Rail

Seat Member/ Seat Rail

Back Member/ Back Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair Easy by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

CHAIR WRITING:-FD-250, 261, 280 & 1107 :- S & F of following existing old broken wooden components of chair writing similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge.

Back rest

Bottom Leg Stiffener

Front Legs

Rear Legs

Seat Member/ Seat Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair writing by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

RECANING OF WOODEN CHAIRS:- M&L for removing old unserviceable plastic cane form wooden chair and providing new white colour plastic cane 2mm to 2.5mm wide 0.40mm thick for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description of chairs( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg .

Chair Dining:- FD-279,262,228,1105

Chair Writing:-FD-261,280,250,1107

Chair Easy:-FD-229,358

REPAIR OF TABLE BED SIDE (MAP) (FD/MAP/07)

M & L for removing old UNSV drawer with telescopice channel from table bed side and S & F new drawer made out of 12mm thick both side pre laminated particle board exterior grade for sides and 18mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board for front & back of drawer including 12 inch long telescopic channel heavy duty for both side of drawer duly fixed suitable screws and all as specified and directed by Engr-in-Charge.

M & L for removing old UNSV left or right side from table bed side and S & F new left or right side made out of 18mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board duly fixed with suitable screws/nails and all as specified and directed by the Engr-in-Charge.

M & L for removing old UNSV cabin shutter from table bed side and S & F new shutter made out of 18mm thick both sides pre laminated particles baord exterior grade colour shade matching with existing board duly fixed with suitable hings matching with existing hinges fixed with screws/nails and all as specified and directed by the Engr-in-Charge.

M & L for removing old UNSV top or bottom from table bed side and S & F new top or bottom of 18mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board duly fixed with suitable screws/nails and all as specified and directed by the Engr-in-Charge.

M & L for removing old broken handle from drawer / shutter of table bed side and S & F new S/S 'C' shape handle 50mm wide duly fixed with suitable machine screws and all as specified and directed by the Engr-in-Charge.

TABLE 3'X2' (900 X 600 X 760MM) WITH DRAWER/WITOUT DRAWER (FD-223/224/283/1007/1008)

Repair of table with or w/o drawer replacement of unserviceable top with commercial particle board 19mm thick as per Drg ISI Marked with Ist class HW teak wood beading 6mm thick including polishing (two or more coats over a coat of wood filler etc).

All as per Item No. 16.01 but replacement of table frames long rail with S&F new table frames long rail made out of Ist class HW teak wood complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 16.01 but replacement of new drawer made out of Ist class hard wood (Teak Wood) with aluminium anodized 35mm/40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 16.01 but replacement of table frames short rail with S&F new table frames short rail made out of Ist class hard wood (Teak Wood) complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 16.01 but replacement of bottom centre stiffener with S&F new bottom centre stiffener complete made out of Ist class hard wood (Teak Wood) all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 16.01 but replacement of new aluminium anodized 35mm/ 40mm dia knob complete all as shown on drawing and as directed by Engr-in-Charge.

All as per Item No. 16.01 but replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge.

Supply and fixing in repair new legs made out with Ist class hard wood as per existing or as per Drg polishing with French polish (two or more coats) over a coat of wood filler after preparation of surface etc.

TABLE DINING 6 PERS (FD-239/273/115) Repair to table dining 6 pers including dismentalling/removal of all broken parts and replacing with new parts of well seasoned Ist class Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.

Leg made out of Ist class Teak Wood

Long Rail made out of Ist class Teak Wood

Short Rail made out of Ist class Teak Wood

Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw

Centre stiffner made out of Ist class Teak Wood

Rubber/PVC shoes

Scratching the entire wooden pallets of table dining filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be with french polish complete all as specified under directed.

TABLE CENTRE (FD-235/274) The following repair shall be carried out to Table centre after removing old UNSV parts and replacing with new parts of well seasoned Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board exterior grade with Indian Teak wood as all around.

Leg made out of Ist class Teak Wood

Long Rail made out of Ist class Teak Wood

Short Rail made out of Ist class Teak Wood

Centre stiffner made out of Ist class Teak Wood

Rubber/PVC shoes

Scratching the entire wooden pallets of Centre table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be french polished in wallnut shade & finishing it with french polish complete all as specified under directed.

TEAPOY (FD-382/278) The following repair shall be carried out to Teapoy after removing old UNSV parts and replacing with new parts of well seasoned Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board exterior grade with Indian Teak wood as all around

Leg made out of Ist class Teak Wood

Rail made out of Ist class Teak Wood

Rubber/PVC shoes

Scratching the entire wooden pallets of Teapoy filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be polished in french polish complete all as specified under directed.

PEG TABLE (FD-277/384/237/1114) The following repair shall be carried out to Peg Table after removing old UNSV parts and replacing with new parts of well seasoned Teak wood free from pits & Knots as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board exterior grade with Indian Teak wood as all around .

Leg made out of Ist class Teak Wood

Rail made out of Ist class Teak Wood

Rubber/PVC shoes

Scratching the entire wooden pallets of peg table filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be polished in french polish complete all as specified under directed.

TABLE 3'x3' (900x900) (FD-88/291/1009) Repair to table dining 3'x3' (OR's) including dismentalling/removal of all broken parts and replacing with new parts of well seasoned Teak wood as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.

Leg made out of Ist class Teak Wood

Long Rail made out of Ist class Teak Wood

Short Rail made out of Ist class Teak Wood

Indian Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw

Centre stiffner

Rubber/PVC shoes

Scratching the entire wooden pallets of Table 3'x3' filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be polished in french polish complete all as specified under directed.

TABLE DINING 4 PERSON (1200X900) FD/MAP/09) Repair to table dining 4 pers including dismentalling/removal of all broken parts and replacing with new parts of well seasoned Teak wood as under complete all as specified under directed:-

Top made out of 18mm thick pre laminated particle board shade and texture as approved by engineer in charge with matching Indian Teak wood edging.

Leg made out of Ist class Teak Wood

Long Rail made out of Ist class Teak Wood

Short Rail made out of Ist class Teak Wood

Indian Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw

Centre stiffner made out of Ist class Teak Wood

Rubber/PVC shoes

Scratching the entire wooden pallets of Table dining 4 person filling puty to the bore holes making surface smooth by scratching it with an electric grinder and shall be polished in french polish complete all as specified under directed.

REPAIR TO TEAPOY VARANDAH (FD-255):-Taking down old U/S top of teapoy varandah and S&F new top of teapoy varandah made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.

SOFA CHAIR SINGLE SEATER WITH ARMS FD-281/1113 : Removing UNSV and S & F the following existing wooden components from sofa chair single seater with arms carefully without distrubing the adjoining parts made of first class teakwood well seasoned free pits & knots including tightening the joints, pinning, screwing, nailing, welding, glueing, placing every part in-tact complete all as specified and directed by Engr-in-Charge.

Cushion 100mm thick for seat & back 75 mm thick & 32 density Make-SLEEPWELL/KURLON (Kurlon Ltd) duly covered wirh tapestry cloth not less thatn Rs 350 per mtr quality and shade as approved by Engr-in-Charge/GE.

Arms made out of Ist class Teak Wood

Legs made out of Ist class Teak Wood

Batten made out of Ist class Teak Wood

Bearer made out of Ist class Teak Wood

M&L for preparation of wooden surfaces of sofa set single seater by scrapping with sand paper redusting and applying putty whereever required and policing the surfaces with french police two coat to get gloosy finishing all as directed by Engr-in-Charge

SOFA SET THREE SEATER SINGLE PIECE FD-281/1113 : Removing UNSV and S & F the following existing wooden components from sofa set three seater carefully without distrubing the adjoining parts made of first class teakwood well seasoned free from pits & knots including tightening the joints, pinning, screwing, nailing, welding, glueing, placing every part in-tact complete all as specified and directed by Engr-in-Charge.

Cushion 100mm thick for seat & back 75 mm thick & 32 density Make-SLEEPWELL/KURLON (Kurlon Ltd) duly covered wirh tapestry cloth not less thatn Rs 350 per mtr quality and shade as approved by Engr-in-Charge/GE.

Arms made out of Ist class Teak Wood

Legs made out of Ist class Teak Wood

Batten made out of Ist class Teak Wood

Bearer made out of Ist class Teak Wood

M&L for preparation of wooden surfaces of sofa set three seater by scrapping with sand paper redusting and applying putty whereever required and policing the surfaces with french police two coat to get gloosy finishing all as directed by Engr-in-Charge

REPAIR OF BED HARD M & L for removing old underviceable Ply wood top from Bed hard and S & F new plywood top 12mm thick BWR Gde of size 1900x850mm with suitable nut & bolt and all as specified and directed by Engr-in-Charge

M &L for preparation of wooden surfaces of Bed Hard by scrapping with sand paper, redusting and applying putty wherever required and policing the surface with french police to get glossy finish and all as specified and directed by Engr-in-Charge

SNEH CORPORATION

PRAFUL ENTERPRISES

shekhar & company