dhaniura chandrabhan

Excavation in foundation in ordinary soil, loame, clay or sand inculuding lift upto 1.5 m & lead upto 30m including filling watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or in to the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches. SI. No. 251 (Including Royalty Rs. 30.00)

Concrete with 40 mm. gauge brick ballast, fine sand of 1.25 FM and cement in proportion of 12 : 6 : 1 in foundation and under floor, Including supply of all Material, Labour and T & P etc. required for proper completion the work. As per S.I. No. 273

M-150 Brick work in 1:4 cement and coarse Sand mortar in foundation & Plinth inculding supply of all materials Labour T & P etc.required for proper completion of work. As per S.I. No. 305

Cement Concrete with 20 mm. gauge approved stone grit ;approved Coarse Sand and Cement in the proportion of 4:2:1 inculding supply of all Material, Labour and T & P etc. required for proper completion the work. As per S.I. No. 279(i)

PROVIDING AND LAYING OF 80 MM THICK INTERLOCKING CEMENT CONCREAT TILES ( 30 MPA ) INCLUDING LAVELING AND DRESSING OF SURFACE TOREQURED LEVEL AND SLOPE, FILLING JOINTS, WITH LOCALP.W.D/ ROAD WORK NEW -1INCLUDING COST OF MATERIALS LABOUR T&P etc.REQURED LEVEL AND SLOPE, FILLING JOINTS, WITH LOCAL SAND INCLUDING COST OF MATERIALS LABOUR T&P etc. P.W.D/ ROAD WORK NEW -1

12 m.m. thick Plaster with Cement mortar consisting of one part of cement and 4 part of coarse sand of 2.25 FM on brick work including supply of all material, labour, T&P etc.S.I No 584(i)

R.C.C work for drain cover with cement approved coarse sand and 2 cm (3/4)"gauge approved stone grit in the proportion of 1 :2 : 4 excluding supply of reinforcement and its binding but including its fixing and binding the same with 24B.W.G.G.I binding wire and inculding the cost of binding wire moulds all other materials, Labour and T&P etc. required for proper completion the work. As per S.I. No. 283

Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks. S.I.No. 504

Supply of Informatory M.S. Sign. Board Size 1200x900mm made of 18 gauge M.S. Sheet fixed in ISA 40x40x5 mm. frame by flat iron 40x5mm. on all four sides along with two vertical post of 2150mm. long from bottom to frame of angle iron 40x40x5 mm. with 150mm. horizontal hold fast at bottom braced with 40x5mm. flat iron 1980mm. long electrically welded and painted with one coat of redoxide primer.Rates Sanction SE/RED RS. 4200/-+writting and fixing.