Providing Drinking Water to JHC DL.Puram H/o DL.Puram GP of Nakkapalli Mandal in Anakapalli District Estimate cost of Rs.5.50 Lakhs

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, Vibrated Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregare: Coarse aggregate) using 40 mm size (SS5) hard, machine crushed granite metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc., to site, Sand filling in basement with watering and tamping, Construction of Randam rubble stone masonry in CM (1:6) 2nd sort, Reinforced Cement Concrete corresponding to M20 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture, Providing high yield strength deformed (HYSD) steel TMT bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, Palstering 12mm thick double coat in CM(1:5) 8m thick base coat and CM (1:3) of 4mm thick top coat for external, Painting to new walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of approved cement primer garde I making 3 coat i n all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, Providing & Placing on Terrace (at all floor levels) polyethene water storage tank with Double layer approved brand & manufacture with cover and sutable locking arragement & making necessary holes for inlet & outlets and over flow pipes but without fitting & base support for tank including cost,conveyance of all materials, labour charges etc complete.

Supply amd transportation of 2.0 HP 25 staging Submersible pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete Makes : As per list of recommended brands as category I.Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/AryenVarsha/ Falcon with required head and discharge and exclding GST. etc complete, Supply and fixing of 63 mm dia HDPE pipe 10kg/cm2 for suction pipe, Supply and fixing of 40 mm Nominal Bore Gi pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings, Supply and fixing of 40 mm GI union 1st quality, Supplying & fixing of 40 mmNBSize Gunmetal (GM) Horizontal Check (Nonreturn), Supply and fixing of Gunmetal Gate(GMpeet) valve, Supply of 2.5 Sqmm Flat Copper cable, Supply and fixing of 40mm GI union, Supply and fixing of end cap for UPVC casing pipe, M.S. Clamp set, Supply of 62A Porcelain Rewirable Fuse Units, Supply of 6-32A FP MCB 10KA C/D Curve, Supply of 6 sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire, Fabrication , transportation and supply of suitable size, Cost of Shellock bottles, Cost of Cable joint kit, Cost of Teflon tapes, Cost of Insulation tapes, Erection charges of submersible pumpset, including cost and conveyance of all materials and all labour charges etc., complete

Construction of pipelines for water supply with 63mm dia, 6Kg/Cm2 HDPE PE-100 grade pipes as per IS 4985/2000 with its latest amendments and revisions thereon, including supplying of pipes, necessary specials such as bends, Tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation 2/3 rd machinery and 1/3rd manually for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications (Part-B-Volume-I) . The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of pipeline work, but excluding GST and seignourage charges but including Overheads and contractors profit @ 13.615% - Pipe line

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 without bypass upto 400mm dia and with bypass above 400mm dia - 80mm Sluicce valve on 63mm HDPE pipe

Construction of Functional House Hold Tap Connections (FHTC) with PP Clamp Saddle, The Ferrule pressure rating PN 10 and shall comply with IS 2692: 1989, cost suuply and fixing of compression fittings shall comply with ISO 17885 2015 , PN-16 rating and manufactured from virgin rates of PE-80 haing blue colour .Raw material must be WRAS approved as per BS 6920 for effect on water quality intended for human consumption. compression fittings should have moulded in SS 304 threaded insert outlet with thread dimension conforming to IS 554/IS07, compression male/female threaded adopter with SS insert D 20 mm x 1/2", Manufacture, Supply, & Delivery of MDPE Pipes conforming to IS 4427 part 2 of PE 80 grade material along with all fittings ,including cost of all materials ,manufacturing loading and unloading ,stackong including transportation to anywhere in A.P, 20mm OD HDPE pipe (pipe series SDR 11) PN 16 pressure class, Laying and Jointing of 20mm MDPE pipe, S&F 15mm Nominal Bore GIpipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings, Supply and fixing of 15mm Brass body chromium plated finish BIB Tap of not less than 300 grams eight screw type (full turn) with internal and external threaded connection conforming to IS 8931 including cost,conveyance of all materials,labour charges etc with relevent IS codes,by using with food grade material suitable for usage in drinking water system to the extent of departmental satisfaction including Over heads and Contractor [email protected]% but excluding GST and Seignorage charges.

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, Vibrated Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregare: Coarse aggregate) using 40 mm size (SS5) hard, machine crushed granite metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc., to site, Sand filling in basement with watering and tamping, Construction of Randam rubble stone masonry in CM (1:6) 2nd sort, Reinforced Cement Concrete corresponding to M20 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture, Providing high yield strength deformed (HYSD) steel TMT bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, Palstering 12mm thick double coat in CM(1:5) 8m thick base coat and CM (1:3) of 4mm thick top coat for external, Painting to new walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of approved cement primer garde I making 3 coat i n all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, Providing & Placing on Terrace (at all floor levels) polyethene water storage tank with Double layer approved brand & manufacture with cover and sutable locking arragement & making necessary holes for inlet & outlets and over flow pipes but without fitting & base support for tank including cost,conveyance of all materials, labour charges etc complete.

Supply amd transportation of 2.0 HP 25 staging Submersible pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete Makes : As per list of recommended brands as category I.Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/AryenVarsha/ Falcon with required head and discharge and exclding GST. etc complete, Supply and fixing of 63 mm dia HDPE pipe 10kg/cm2 for suction pipe, Supply and fixing of 40 mm Nominal Bore Gi pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings, Supply and fixing of 40 mm GI union 1st quality, Supplying & fixing of 40 mmNBSize Gunmetal (GM) Horizontal Check (Nonreturn), Supply and fixing of Gunmetal Gate(GMpeet) valve, Supply of 2.5 Sqmm Flat Copper cable, Supply and fixing of 40mm GI union, Supply and fixing of end cap for UPVC casing pipe, M.S. Clamp set, Supply of 62A Porcelain Rewirable Fuse Units, Supply of 6-32A FP MCB 10KA C/D Curve, Supply of 6 sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire, Fabrication , transportation and supply of suitable size, Cost of Shellock bottles, Cost of Cable joint kit, Cost of Teflon tapes, Cost of Insulation tapes, Erection charges of submersible pumpset, including cost and conveyance of all materials and all labour charges etc., complete

Construction of pipelines for water supply with 63mm dia, 6Kg/Cm2 HDPE PE-100 grade pipes as per IS 4985/2000 with its latest amendments and revisions thereon, including supplying of pipes, necessary specials such as bends, Tees, etc., lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation 2/3 rd machinery and 1/3rd manually for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications (Part-B-Volume-I) . The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of pipeline work, but excluding GST and seignourage charges but including Overheads and contractors profit @ 13.615% - Pipe line

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 without bypass upto 400mm dia and with bypass above 400mm dia - 80mm Sluicce valve on 63mm HDPE pipe

Construction of Functional House Hold Tap Connections (FHTC) with PP Clamp Saddle, The Ferrule pressure rating PN 10 and shall comply with IS 2692: 1989, cost suuply and fixing of compression fittings shall comply with ISO 17885 2015 , PN-16 rating and manufactured from virgin rates of PE-80 haing blue colour .Raw material must be WRAS approved as per BS 6920 for effect on water quality intended for human consumption. compression fittings should have moulded in SS 304 threaded insert outlet with thread dimension conforming to IS 554/IS07, compression male/female threaded adopter with SS insert D 20 mm x 1/2", Manufacture, Supply, & Delivery of MDPE Pipes conforming to IS 4427 part 2 of PE 80 grade material along with all fittings ,including cost of all materials ,manufacturing loading and unloading ,stackong including transportation to anywhere in A.P, 20mm OD HDPE pipe (pipe series SDR 11) PN 16 pressure class, Laying and Jointing of 20mm MDPE pipe, S&F 15mm Nominal Bore GIpipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings, Supply and fixing of 15mm Brass body chromium plated finish BIB Tap of not less than 300 grams eight screw type (full turn) with internal and external threaded connection conforming to IS 8931 including cost,conveyance of all materials,labour charges etc with relevent IS codes,by using with food grade material suitable for usage in drinking water system to the extent of departmental satisfaction including Over heads and Contractor [email protected]% but excluding GST and Seignorage charges.