APPLICATION OF PME ON RUNWAY FLEXIBLE SURFACE AND REPAIR OF DRAIN COVERS AT AFS JODHPUR

Amount

M&L for cleaning the surface by brushing with wire brushes for removing caked mud etc, sweeping with compressor air blower to remove all loose dust and dirt etc/taking out dust/ existing material with compressed air and making the surface free from dust, drying the surface and applying Two coats of polymeric modified emulsion (PME) by using self propelled emulsion distribution uniformly or towed emulsion pressure sprayer , equipped for spraying the PME uniformly and mopping the total undiluted PME @ 1.00 litre per sqm in two coats in ratio 1:1 (PME: water) and ensure uniform finish of total area complete all as specified and directed. Note: The tenderer shall take into consideration the following points while quoting rate for the above item:- (i) No price adjustment shall be applicable if excess quantity of polymer modified emulsion (PME) shall be used, depending upon condition of existing flexible surface. (ii) Special care shall be taken to fill gaps/cracks up to 6mm wide with 2.36 mm size coarse sand mixed with PME as per manufacturers instructins and quoted rate shall be included for same.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in ground floors and pavinng n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Framed work such as grills, gratings etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by the Engineer -in - Charge.

M&L for preparation of new steel surface of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified. NOTE FOR ITEM NO 1.00 TO 4.00 :-The work will be carried out as per user requirement from 1830 hrs to 0600 Hrs. The deployment of labour and T&P arrangement on the Runway shall be intimated to the contractor by 0800 Hrs each day in the morning. The contractor shall be provide necessary arrangement such as lights, T&P etc and quote the rate accordingly for considering late working hours at night. Nothing extra will be paid on this account.

Om Trading Corporation

tulsani associates

D DEV COMPANY