Furniture work

NAME OF WORK:- Furniture work For New Branch, At.Savar Kundla

Location : C.S.No. 4379 Paiki, Mahuva Road, Savar Kundla, TAL. Savar Kundla, DIST. AMRELI

I. No. Item Description Qty. Rate Per Amount

Providing and fixing in position table of verious size as per

architect drawing incl. side storage by using 18mm thick

plywood for top and all other horizontal and vertical

members. In top arround all side with 50mm wide 12mm

thick plywood for making groove all exposed surface of

table excluding top are 3mm thick approved and selected

ACP finished. All drawer making from 18mm thick side

and 8mm thick bottom plywood with all side 1mm thick

white laminate and front side 3mm thick selected ACP

Sheet with telescopic channel with Aluminum handle with

lock. Key board tray making from 18mm thick plywood

with three side vertical 40mm facia and front side top

20mm wide 5mm thick round edge teackwood batten

patti with bothside telescopic channel. all other design

making from plywood and 3mm Thick ACP finished as per

detail drawing and directed by Engineer-in-charge. all

materials using as per approval of the project consultant.

all necessary hardware and fitting in stainless steel

finished, Incl. All type of materials and labour charges etc.

Approved Company

Ply wood : Kitply, Greenply, Greenpeel National or

Laminate :Royale Touch, Sunmica, Formica, Greenlam,

Durian, Silicon, Merino

ACP : Aludecor, Foreman, Viva, Alstone, Eurobond

Hardware Materials : Godrej, Polo, Uropa and Ozone

2 ARTIFICIAL GLASS WHITE :

Providing and fixing 15mm thick artificial glass white

stone with necessory cutting including cutting cable

manager as per drawing, all exposed edge with mirror

polishing and fixing with silicon. All the work shall be

carried out as per the instruction and drawings supplied

by the Consultant and the time of execution of works.

Material will be approved by Architect / Project

consultant in charge (MR).

3 BACK SIDE FILE RACK :

Providing and fixing in position back side File Rack of

verious size as per Architect drawing by using 18mm thick

plywood for top and bottom, 12mm thick plywood back

side and 18mm vertical partition and horizontal self, and

front door. All inner side srface by 1mm thick white

laminate finished and outer side 3mm thick selected ACP

finished. All drawer making from 18mm thick side and

8mm thick bottom plywood with all side 1mm thick white

laminate and front side 3mm thick selected ACP with

telescopic channel with Aluminum handle with lock. all

necessary hardware and fitting in stainless steel finished,

Incl. All type of Materials and Labour Charges etc. comp

as per drawing and directed by Engineer-in-charge.

I. No. Item Description Qty. Rate Per Amount

Approved Company

Ply wood : Kitply, Greenply, Greenpeel National or

Laminate : Sunmica, Formica, Greenlam, Timex, Durian,

Silicon, Merino and Royale Touch or equilent

ACP : Aludecor, Foreman, Viva, Alstone, Eurobond

Hardware Materials : Godrej, Polo, Uropa and Ozone

4 FULL HEIGHT PARTITION :

Providing and fixing of full height Partition with Partially

12mm thick toughened glass as per drawing with 50mm

thick made from 12mm thick both side plywood with

hollow type including all exposed surface with 3mm

selected ACP. specification and as per the drawings and

also directed by Architects / Consultant. all the material

will be approved by Architect / Project consultant in

Approved Company :

Glass : Modiguard, Saintgobine

Patch Fittings : Ozone

Ply wood : Kitply, Greenply, Greenpeel National or

Laminate : Sunmica, Formica, Greenlam, Timex, Durian,

ACP : Aludecor, Foreman, Viva, Alstone, Eurobond

Hardware Materials : Godrej, Polo, Uropa and Ozone

5 Low HEIGHT PARTITION :

Providing and fixing in position low height partition

(50mm thick ) in 3-12 mm Ply Hollow with both sides

finished with 3 mm thick ACP on approved make and

shade as shown in drawing. All the work shall be carried

out as per the instruction and drawings supplied by the

Consultant and the time of execution of works. Material

will be approved by Architect / Project consultant in

charge. (M.Rate)

Approved Company

Ply wood : Kit ply, Century, Green ply, National, Sarda,

Mayur and Silicon

ACP : Aludecor, Foreman, Viva, Alstone, Eurobond

Laminate : Sunmica, Formica, Greenlam, Timex,

Durian, Silicon, Merino and Century

6 PANTRY PLATFORM :

The frame work of the cabinets including drawer fascia,

sides, bottom, shelves etc. shall be made out of 18mm

thick Marine plywood Shutters shall be made out of

18mm thick Marine plywood. Each shutter shall be fixed

to the framework using two numbers of best quality

EURO type Slip/Auto Hinges and provided with one

approved quality and profile brush finished Stainless Steel

(SS) handle of grade

I. No. Item Description Qty. Rate Per Amount

Each drawer fascia shall be made out of 18mm thick

Marine plywood with inner side white laminate and all

exposed with selected Acrylic laminate of approved

quality and make Tandem baskets / accessories shall be

mounted on approved quality, high precision channels for

Tandem baskets/slides to be designed as per drawer size

and to meet the weight requirement with minimum

length of 500mm to ensure smooth movements of

drawer with /without content weights and provided with

approved quality Aluminum handles.

In each Pantry there should be a minimum of 1 No. cup &

saucer basket (4” size), 1 No. Glass basket (6” size), 1 No.

'Plate' basket (8” size), 1 No. Perforated Cutlery basket

(4” size), 1 Nos of plain multipurpose baskets (4” size),

Nos of plain multipurpose baskets (6” size), 1 Nos of plain

multipurpose baskets (8” size), 1 No. shutters below the

sink. 1 No plain shutter at the gas cylinder. The shutters

shall be of 18mm Marine plywood fascia, sides, bottom

as required as per the drawings given.

All faces and edges of support slabs below the kitchen

slab, wooden planks for supporting telescopic channel

Payment shall be made on the basis of front elevation

area of modular units only. It is clarified that sides, top

and bottom surfaces will not be measured for payment.

The wooden frame for shutter shall be made of minimum

70 mm wide marine plywood with lamination, wherever

required. The telescopic channel shall be supported with

75 mm wide vertical and horizontal marine plywood

members with laminate fixed on vertical support. If there

is a need of erecting additional vertical marine plywood

members with laminate on account of site conditions, the

quoted rate shall have provision of carrying out these

All necessary hardwares, wooden members with required

thickness for fixing telescopic channel rails and filling the

gaps shall be included in the quoted rate. The quoted

rate shall include making of vertical partition below the

existing kitchen slab with 18mm thick marine plywood if

necessary to accommodate modular kitchen units as per

the requirement.

Approved Company

Ply wood : Kitply, Greenply, National, Sarda, Mayur and

Laminate : Sunmica, Formica, Greenlam, Durian, Silicon,

Merino, Royale Touche

Hardware Materials : Godrej, Polo, Uropa and Ozone

I. No. Item Description Qty. Rate Per Amount

Supply & Installation of Full Height Glass Door System of

12 mm toughened glass with Ozone Floor Spring and

Patch Fitting systems of as per Manufacturers

specification as verticals and horizontals at top and

bottom with option for installing glass & glass to glass

joint with other required accessories from FFL to

mm as per the drawing. and instructions of the

Architects/ Consultant .All the work shall be carried out

as per the instruction and drawings supplied by the

Consultant and the time of execution of works. Material

will be approved by Architect / Project consultant in

Approved Company :

Glass : Modiguard, Saintgobine

Patch Fittings : Ozone

Hardware Materials : Godrej, Polo, Uropa and Ozone

8 BENDING GLASS :

Supply & Installation of Bending fix Glass of 12 mm

toughened glass with Ozone Patch Fitting systems of as

per Manufacturers specification as verticals and

horizontals at top and bottom with option for installing

glass & glass to glass joint with other required accessories

from FFL to 3000 mm as per the drawing. and instructions

of the Architects/ Consultant .All the work shall be carried

out as per the instruction and drawings supplied by the

Consultant and the time of execution of works. Material

will be approved by Architect / Project consultant in

charge. (M.Rate)

Approved Company :

Glass : Modiguard, Saintgobine

Patch Fittings : Ozone

Hardware Materials : Godrej, Polo, Uropa and Ozone

9 Frosted Glass Film :

Providing and pesting frosted film on Glass as per design

given by Engineer-in-charge. The work completed with all

materials and labour and finishing completed as per

directed by Engineer-in-Charge. (M.R.)

Approved Company - GM

10 CEILING BOX :

Providing and Fixing ceiling box for AC indoor unit making

from 18mm thick plywood with ceiling support including

all exposed surface with 3mm thick selected ACP. All the

work shall be carried out as per the instruction and

drawings supplied by the Consultant and the time of

execution of works. Material will be approved by

Architect / Project consultant in charge.

11 GYPSUM CEILING :

Providing and Fixing in position false ceiling in gypboard

12 mm thick for horizontal and vertical fixed over.

G.I.framework as specified by india Gypsum co. ltd. incl.

trap doors for A.C. and Lights as per Architect Design and

Drawings. Sheet and other material like "L" Patty (24

Gauge), Bottom Patty (24 Gauge), Screw and Fastner shall

be using a Gyproc (Saint Gobine Company) incl. All type

of Materials and Labour Charges etc. comp.

I. No. Item Description Qty. Rate Per Amount

12 METAL CEILINGS WITH XL 24MM GRID :

Providing, supplying, and fixing 600 mm × 600 mm lay-in

metal false ceiling system comprising powder-coated

galvanized steel/aluminium metal ceiling tiles laid on an

exposed hot-dip galvanized steel suspension grid system

manufactured by Armstrong World Industries or

approved equivalent, complete with main tees, cross

tees, wall angles, suspension system, hangers, fasteners,

accessories, cutting, fitting, and finishing as per the

approved drawings, manufacturer's specifications, and

instructions of the Architect/Consultant.comp. (M.Rate)

13 WPC Ceiling :

"Providing and fixing WPC (Wood-Plastic Composite) false

ceiling panels of approved shade and design. Panels shall

be of size [e.g., 2950mm x 195mm x 27mm] with a

minimum wall thickness of [e.g., 5mm]. The installation

includes a supporting framework of GI/Aluminium

sections (30mm x 20mm or as per site condition) fixed to

the existing soffit at [e.g., 450mm] intervals using

expansion fasteners. The item includes all necessary clips,

screws, edge trims, and scaffolding. Work must be

finished as per manufacturer's specifications and as

directed by the Engineer-in-Charge."

Providing and fixing shelf as per Architect drawing by

using 18mm thick plywood with facia 18mm groove make

from 50mm wide 18mm thick playwood with all border

and middle support with facia 3mm thick selected ACP

finished. All the work shall be carried out as per the

instruction and drawings supplied by the Consultant and

the time of execution of works. Material will be approved

by Architect / Project consultant in charge (MR).

Approved Company :

Ply wood : Kitply, Century, Greenply, National, Sarda,

Mayur and Silicon

Laminate : Sunmica, Formica, Greenlam, Timex, Durian,

Silicon, Merino and Century

ACP : Aludecor, Foreman, Viva, Alstone, Eurobond

15 CHAIR (LOW BACK):

Providing and supplying Visitor Chair Low Back shall be

made with Polyurethane moulded cushion of average

density range between 45.50 Kgs/Cumt. giving contoured

raised profile patteren on seat and back for fomfort. The

seat shall be supported on plywood and shall be covered

with fabric of colour and design as approved by the

Architect / Consultant. The back shall be snapfit and shall

be covered by an impect resistance plastic moulded cover

with ribbed pattern having polyureth of +/- 5 mm having

center tilt & gas Michenisum. Armerests shall be made of

self skining polyurethen with metal insert and shall have

arrangements at the bottom to fasten to the seat by the

means of bolts. Five pronged injection moulded base

shall be made out of glass filled nylon and shall be fitted

with twin wheel castor. All the work shall be carried out

as per the instruction and drawings supplied by the

consultant and the time of execution of works. Material

will be approved by Architect / Project consultant in

charge. All type of Materials and Labour Charges etc.

I. No. Item Description Qty. Rate Per Amount

16 HIGH BACK CHAIRS :

Providing and fixing High Back chairs made of 1" ERW

pipe of 16 gauge seat and back is made of 12mm hot

press single ply and provided with 40/50 & 23 density

12mm pure foam (Feather foam make) and covered with

premium quality of leather/fabric. The chair with duo

colour fabric combinations as per EIC / Architect. The

chair shall be provided with 120mm BIFMA Passed gas lift

and conventional tilt mechanism with one lever control

for lock and seat height adjustment. Plate thickness shall

2.5 mm and angle is 3~18 (BIFM Passed) with poly

urethane one pipe handle and nylon base having 1359 kg

weight capacity as per BIFM standard. all the metal parts

of the chair are pre treated prior to powder coating/

chrome. size 675 x 675 x 1165mm. seat ht: 440/540mm

17 DESIGNER SOFA:

Providing and Fixing in Position Sofa as per

Architect/Consultant Design. The seat and back shall be

made out of 18 mm thick ISI Plywood in a box form. It

shall be covered with 100 mm and 50 mm thick

density U-Foam in seat and back respectively. this should

be again covered with 14 mm thick 32 density U-Foam

with madarpat cover on & upholstered of suggesed shade

& finish in seat and back on all open visible sides with

basic rate Rs.400/- Per meter ( Minimum Rate) It will have

upholster handle all materials and labor etc. complete as

per instruction of Architect / Consultant in charge. The

Rate shall be included all materials, hardware and labor

etc. All the work shall be carried out as per the instruction

and drawings supplied by the consultant and the time of

execution of works. Material will be approved by

Architect / Project consultant in charge. (M.Rate)

18 ROLLAR BLIND :

Providing and Fixing in Position 2000 mm wide black out

ROLLER BLINDS of fabric 100% polyster (Plain Weave),

with pigment PVA-coating on both side of the fabric with

one intermidiate black coating of Dupont make, flame

retardant, of Technofab make as approved with regular

imported spring typr one touch mechanisam and inclu. all

standered fittings, accessories as per the manufactures

specification, for windows as directed, The Rate shall be

included all materials, hardware and labour etc. All the

work shall be carried out as per the instruction and

drawings supplied by the consultant and the time of

execution of works. Material will be approved by

Architect / Project consultant in charge.

Applying two coat soft putty & two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

I. No. Item Description Qty. Rate Per Amount

20 PAINTS (COLOUR):

Providing and applying Plastic Emulsion paints of Asian

Paints / ICI Deluxe / Jotun and Asian Paints in minimum

coats including scraping opening of existing cracks filling

up of "V" cracks with epoxy expandable putty to required

depth, making good weak plastered/unflustered surface

with cement plaster wherever required. Item to include

Plaster of Paris Making good existing surface to receive

new paint including cleaning on completion of painting

work etc. comp. The Rate shall be included all materials

and labor etc. All the work shall be carried out as per the

instruction and drawings supplied by the consultant and

the time of execution of works. Material will be approved

by Architect / Project consultant in charge. (M.Rate)

21 AIR CONDITIONER :

Supplying and installation of 1.1 Ton, 2 Star Non Inverter

Split Air conditioner with nominal capacity having Cooling

capacity W-3600, Rated Power Input : 868W, Rated

Current : 3.85A, ISSER : 5.10, Voltage : 230V /50Hz/Single

Phase, Air Flow rate : 545-820 CMH, Noise level Indoor

Unit : 43-50 db, Outdoor Unit : 60 db, Function modes :

Auto/ Cool/ Fan/ Dry-shall have sleep and power saving

mode, Other Features : Automated vertical swing for

horizontal louvers, Antifreeze thermostat, Compressor :

Rotary type, Body surface finish : Powder coated high

quality paint finish, Air filtering unit : Activated carbon

cartridge, dust proof and anti bacterial filter, Length of

tubings : as per the installation requirement, Remote

handset : LCD display with night glow etc will be

approved by Architect / Project consultant in charge.

Approved Company

1.1 TR CAPACITY

22 CASSETTE AIR CONDITIONER :

Supplying and Installation in Position 3 Star Ratting

cassette A/C of verious capacity for office building,

Nominal Capacity : 7620W, Cooling capacity : 5.25+/- 2%,

Elecricity input : 230V /50Hz/Single Phase, Coefficient

performance : 3 ( Minimum), Max.Ambient tempreture :

48° C +/- 5%, Moisture removal rate : 2 +/- 10%

liter/hour, Air Flow rate : 5.6 cmm (Minimum), Noise level

, Indoor Unit : Less than 45 db, Outdoor Unit : Less than

55 db, Function modes : Auto/Cool/Fan/Dry-shall have

sleep and power saving mode, Other Features :

Automated vertical swing for horizontal louvers,

Antifreeze thermostat, Compressor : Rotary type, Body

surface finish : Powder coated high quality paint finish,

Air filtering unit : Activated carbon cartridge, dust proof

and anti bacterial filter, Length of tubings as per the

installation requirement, Remote handset : LCD display

with night glow, Voltage Stabilizer : Stabilizer having ISI

Quality certification and power rating that matches with

the power rating of the A/C unit, All the work shall be

carried out as per the instruction and drawings supplied

by the consultant and the time of execution of works.

Material will be approved by Architect / Project

consultant in charge.

I. No. Item Description Qty. Rate Per Amount

Supplying and Installation in Position Ceiling Fan

Crompton make Model Name : HS plus (High Speed Plus)

Input Power : 53 watts, Down Rod : 450 mm, Regulator :

as per company make, Air Delivery : 218 Cumt / Min,

RPM : 370, Ball bearing-2, Leaf-3, Service value : 4.11,

Colour : White, Size : 1200 mm , All the work shall be

carried out as per the instruction and drawings supplied

by the consultant and the time of execution of works.

Material will be approved by Architect / Project

consultant in charge. (M.Rate)

24 Light Fixture :

Supplying and Erecting CRCA / Die cast aliminium

poweder coated LED panel light, 200 x 200 mm Size of

premium range panel front frame with translucent cover,

All the work shall be carried out as per the instruction and

drawings supplied by the consultant and the time of

execution of works. Material will be approved by

Architect / Project consultant in charge. (M. Rate)

Approved Company :

Wipro, GM, Havells,

(D) 9 Watt C.O.B. 2.00 1565.50 Nos.

(E) 12 Watt C.O.B. 2.00 1717.00 Nos.

(F) 20 Watt 20 Watt LED Batten Tube Light, 100 Lumens

Per Watt, 6500K, Long Life, Anti-glare Diffuser, 8.00 252.50 Nos.

Fluctuation Proof

(G) 17x6mm Surface Aluminium Profile Light Channel

with White Diffuser with LED Strip Light including all 18.00 1565.50 Rmt.

(H) Elevation Light Fixture On Elevation "Supply,

Installation, Testing, and Commissioning (SITC) of

exterior grade, architectural LED elevation light fixtures

(Make: [Approved Manufacturer Name, e.g., Philips,

Osram,Wipro, etc.], Model: [Specific Model Number])

for building facade/elevation as per the

Architectural/Electrical consultant's design and

drawings. The scope includes providing all standard

accessories such as an integral electronic driver,

mounting brackets/arrangements, glands, necessary

IP65/IP66 junction boxes, and all required hardware (SS 8.00 1767.50 Nos.

nuts, bolts, etc.). The fixture shall have a die-cast

aluminium housing with a powder-coated finish,

tempered/toughened glass lens, an IP rating of IP65 or

better, a minimum power factor of 0.95, and a high

Color Rendering Index (CRI >80). The item covers all

wiring from the nearest Lighting Distribution Board

(LDB) using FRLS PVC insulated copper conductor cables

of appropriate size laid in 20/25mm dia PVC rigid

conduits, scaffolding, all lead, lifts, and labour to

achieve the final desired lighting effect as directed by

I. No. Item Description Qty. Rate Per Amount

Providing and Fixing in Position 35 mm Thick W/P SINGLE

LEAF SINGLE SWING FLUSH DOOR (With 400 to 500 mm

width, 36 mm Thick Plywood Full Frame with 3 mm ACP

Finished) Specification. Complete as per details and

instructions of the Architect. (a) Shutter : 35 mm Thick,

mm Core, Water Proof, Full Pine Patti, Frame width

mm & fixing single leaf single swing flush door of

approved make, finished with 3mm thick App. ACP. The

shutter edges shall be lipped in 8mm thick approved

timber beading . (b) Hardware's to be used Stainless

Steel, (c) Door Hinges Gurge, Godrej - Ball Bearing Hinges

(d) Mortise Lock with Half Cylinder with Lever Handle

Polo, Godrej, Uropa, All the work shall be carried out as

per the instruction and drawings supplied by the

consultant and the time of execution of works. Material

will be approved by Architect / Project consultant in

charge. (M.Rate)

26 SIGNAGE PLATE:

Providing and fixiing signage with 2mm thk SS brush

finished plate with etching names fixed on the door with

Birla 3M double sided sticker as per the approved

sample.All the work shall be carried out as per the

instruction and drawings supplied by the Consultant and

the time of execution of works. Material will be approved

by Architect / Project consultant in charge.

CCTV Servailance System : Supplying and instalation of

CCTV servailance system having 20 No. Bullet/Dom 4MP

camera as per drawing, 32 channel NVR with rack of -

SATA - 256 MBPS, 2 nos of 2 TB Hardisk necessary POE,

with box, Cat-6 cable as per require with piping, RJ45

jack and necessary socket box, etc. complete with all

types of materials and labour work complete as per

drawing and as per directed by project architect.

Supplying, and instalation Caller ID Landline, DTMF/FSK

Compatible, 16 Digit LCD, Two Way Speaker phone, Music

On Hold, In-use LED, 8 One Touch Memories,

Incoming/15 Outgoing calls Memory, 16 Ring Melodies of

approved brand.

29 Telephone wiring

Supplying and instalation of Telephone wiring all with two

pair cable as per plan and directed by project architect.

All wiring concealed in existing pipe upto connected with

EPBX as per requirement with jack and junction box. All

the work carried out as per directed by project architect.

I. No. Item Description Qty. Rate Per Amount

Supplying, erecting, commissioning and testing analog

EPABX CMOS microprocessor based system having

common features With remote programming & remote

dialing having following other common features. Auto

Call Disconnector- (Incoming - Local- STD) with

programmable timing- External Call forward with DOSA-

Walk in Class of service & trunk reservation- Boss ring &

call back on No Reply last caller recall CLI- Hot Line with

Delay & with No.- Unsupervised Conference- Serial DISA (

DISA with option to dial another No. if Extn. is No

Reply)- Programming Flexibility of all features related to

timer ( 41 Timer)-10 Different group of out going call

restriction like 95, 97, 98 etc. Having 4 incoming junction

line & 12 extensions.

Providing, Supplying and instalation of Lane Cable Cat-6

including necessary piping and RJ-45 crimping, RJ-45

socket with box, plate etc. complete of entire building as

per drawing and directed by architect.

Providing, Supplying and instalation Luminous Optimus

6000 Sine wave UPS having 5 KVA, 48V DC with 4 nos.

Liminous tall tubular battery of 12V 250AH UCTT28066

with 5 year battery warranty including battery stand and

complete instalation with necessa

33 ACP Sheet Wall Panelling :

Providing and fixing of internal wall panelling with 4 mm

thick Aluminium Composite Panel (ACP) sheets of

approved make and colour, comprising 3 mm

Polyethylene (PE) core with 0.5 mm aluminium skin on

both sides, fixed over approved G.I./Aluminium

framework of required size and spacing, including

necessary channels, sections, brackets, cleats, screws,

rivets, fasteners, jointing materials, edge profiles, trims

and all necessary accessories. The ACP sheets shall be

accurately cut, aligned, levelled and fixed as per approved

drawings and specifications, including making necessary

openings and finishing of edges. The rate shall include all

materials, labour, scaffolding, transportation, installation

and finishing complete in all respects as directed by the

Engineer-in-Charge.

I. No. Item Description Qty. Rate Per Amount

34 Canvas Printed Painting :

Supplying and professionally installing high-resolution,

archival-quality canvas printed paintings as detailed in the

design schedule and approved samples is required.( Size

600 X 900 mm ) The scope includes printing on a

minimum 380 GSM poly-cotton canvas using fade-

resistant UV-curable or pigment-based archival inks with

a protective coating to prevent fading and allow for easy

cleaning. The canvas shall be expertly gallery-wrapped

over a warp-resistant, kiln-dried seasoned wooden

stretcher frame (minimum 30mm thickness), with an

optional decorative floating frame as specified. The rate

covers all materials, robust heavy-duty SS hanging

hardware, transport to site, careful handling, and final

professional alignment/installation in Gujarat to the

satisfaction of the Engineer-in-Charge,

35 Reverse Osmosis :

A 25 LPH (Liters per Hour) RO+TDS system typically

purifies water using reverse osmosis and a TDS (Total

Dissolved Solids) controller, with features like multi-stage

filtration, UV sterilization, and a capacity to handle up to

2000 ppm TDS, Purification Capacity: 25 Liters per hour,

Filtration Stages: Multi-stage purification, including RO

(Reverse Osmosis), UV (Ultraviolet) sterilization, and

sometimes UF (Ultrafiltration) TDS Handling : Designed to

handle input water with Total Dissolved Solids (TDS)

levels up to 2000 ppm, TDS Adjustment: Includes a TDS

controller to adjust the TDS level of the purified water,

Materials: Typically uses food-grade stainless steel and

ABS plastic for durability and safety, UV Lamp: UV LED

24v, Power Consumption: 230 V AC to 24 V DC 2.5 AMP,

Installation: Can be wall-mounted or countertop,

Rejection of TDS: Up to 95%, Recovery: Up to 25%, Input

water Temperature: Min 5 Celsius & Max 50 Celsius, Total

Hardness: 500 ppm (max), Suitable for TDS Levels:

Purification Method: RO+UV+Alkaline, Ultra violet lamp

power rating: 11 W etc. Complete as per approved and

directed by project architect.

36 Granite Takti :

"Providing and fixing of polished Granite Stone Takti

(Name Plate/Inaugural Plaque) of size [e.g., 1200mm x

910mm x 18mm] of approved color and shade (Jet

Black/Ruby Red). The work includes precise computerized

laser engraving or deep sandblast etching of text/logos as

per the provided design. The plate shall be fixed to the

wall or pedestal using high-strength epoxy adhesive or

stainless steel (SS 304) decorative stud bolts with spacers.

The item includes fine edge polishing, chamfering of

corners, all lead, lift, tools, and labor. Final finish shall be

as per the satisfaction of the Engineer-in-Charge."

Providing and fixing mirror with dimond edge polished

fixing with SS stud as per directed by Engineer in charge.

I. No. Item Description Qty. Rate Per Amount

Supplying dust bin of Stainless Steel anti-fingerprint and

anti-rust coating, Paddle Operating Cover, Size : 10" Dia,

15" Height, with Removable inner liner with a stainless

steel carrying handle lifts out for easy disposing of

garbage without using plastic bags and easy cleaning the

whole small garbage can. Material supply will be prior

approval from the Architect / Project consultant. (Basic

Rate : 1800-00 Per Piece) (M.Rate)

39 LED SIGN BOARD FOR BUILDING:

Providing & Erecting Sign Board on Front of Building with

base plate of 14 SWG GI Sheet. Using Acralic Sheet with

Embose Letter upto 9" Height & appropriate width with

osram make LED Watt Lighting in the letter with

approved design by Engineer in Charge.( Incl. necessaries

White ACP ( Aludecor ) and MS Pipe Fabrication ) ( Incl. all

type of labour and Material Charges etc.)

30.00 3060.30 Latter

40 Fire Extinguishe :

All the work carried out as per drawings and directed by

(A) ABC Type 6 K.G. 5.00 2525.00 No.

(B)CARBON DIOXIDE (CO2) TYPE EXTINGUISHER OF 4.5 3030.00 No.

(C) Modular Ceiling-Mounted Fire Extinguisher – MAP 50 5050.00 No.

– Refillable – 10kg

41 Exhaust Fan :

"Providing , Installation, Testing, and Commissioning

(SITC) of high-efficiency, axial/centrifugal exhaust fan of

approved make (e.g., Almonard, Crompton, Havells) and

specified sweep size [e.g., 300mm/450mm]. The unit shall

feature aerodynamically contoured blades for maximum

air delivery with minimum power consumption. The

motor must be a totally enclosed, continuously rated

heavy-duty type with a pressure die-cast aluminium rotor,

mounted on double ball bearings for silent operation. The

fixture shall have a degree of protection against dust and

water entry of at least IP55. The frame and blades shall

be treated with epoxy powder coating for superior

corrosion resistance. The scope includes all necessary

mounting accessories (MS brackets/frames), hardware

(SS nuts, bolts), gravity louvers or bird screens, and

internal wiring from the nearest point using FRLS copper

cables. Work must include making good any wall

openings and be completed to the satisfaction of the

I. No. Item Description Qty. Rate Per Amount

42 Decorative Accessories :

"Supply, procurement, and installation of various

architectural and interior decorative accessories as

detailed in the Bill of Quantities (BOQ), interior design

drawings, and approved sample boards/catalogs. The

scope includes but is not limited to: wall art, framed

prints, sculptural elements, high-end vases/planters,

decorative mirrors, and bespoke artifacts.

All items must be of premium quality, suitable for

commercial/high-traffic use, and conform to the specified

materials (e.g., polished stainless steel, hand-blown glass,

reclaimed wood, high-grade ceramic). The item covers all

necessary structural fixing arrangements, specialized

mounting hardware (concealed brackets, security

fittings), unpacking, careful handling, placement, and final

aesthetic arrangement as directed by the Interior

Designer/Architect/Engineer-in-Charge. All items must be

delivered in pristine condition and carry a manufacturer's

warranty of minimum 1 year against defects."

43 Notice Board :

"Supply and installation of a [e.g., 900mm x 1200mm]

professional-grade enclosed notice board/display case.

The board shall feature a robust extruded aluminium

frame with a natural anodized or powder-coated finish

([e.g., matte silver or black]), fitted with a lockable, clear

polycarbonate/acrylic hinged door (minimum 3mm thick)

and high-quality cylinder lock and key set (two keys

provided). The internal display surface shall be [specify:

cork, felt fabric in approved color, or magnetic

whiteboard surface] suitable for pushpins or magnets.

The item includes all necessary mounting hardware

(concealed brackets, heavy-duty screws/fasteners),

scaffolding for high installations, and final

commissioning/cleaning. The scope covers the supply of

the board and installation to the satisfaction of the

44 Electric fitting : All the electrical work carried out

consealed as per drawing given by consultant. All

consealed pipe using polycab, wire using polycab /

finolex, switch board moduler using GM/ VIHAN, Panel

Board with main Switch using Schinder, Earthing with

Chemical earth having 1.00 Mt earthing road. and all

other acessories and materials using after approval by

consultant. All the work carried out as per drawings and

directed by consultant.(JOB)

Total Amount Rs..

Total Amount Rs..

Roundup Amount Rs..

GST will be paid extra by ANSBL-AMRELI

Stamp with Signature of Contractor

CONS. ENGINEER MANAGER C.E.O. CHAIRMAN

"NEHA CONSULTANCY" AMRELI NAGARIK SAHAKARI BANK LTD. AMRELI