Loading…
Loading…
Tender Value
₹5.5 L
EMD Value
₹11,000
Closing Date
29 Jun 2026, 2:00 pm5d left
Similar tender results from the same govt authority in the past 3 years.
registrar
dsrrau karwar jodhpur
tender for e procurement of electric work at unani hospital baggi khana tonk phase 2
2026_DSRAU_569852_1
09/2026-27
Open Tender
Electrical Works
180 days
dsrrau karwar jodhpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Yes
Registrar, Dr. S.R. Rajasthan Ayurved University
₹11,000
Yes
office of store, dsrrau jodhpur
20 Jun 2026
20 Jun 2026
30 Jun 2026
20 Jun 2026
29 Jun 2026
20 Jun 2026
22 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Electric Work | ||||||
| 1.01 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. Short point (up to 3 mtr.) | 190 | P Point | 359 | ₹68,210 | 8.13.2.2 |
| 1.02 | Medium point (up to 6 mtr.) | 150 | P Point | 578 | ₹86,700 | 7.5.5.1 |
| 1.03 | Long point (up to 10 mtr.) | 40 | P Point | 772 | ₹30,880 | 7.12 |
| 1.04 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 2 x 2.5 sq. mm. + 1x1.5sqmm | 250 | Mtr | 81 | ₹20,250 | 7.25.1 |
| 1.05 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm | 300 | Mtr | 122 | ₹36,600 | 11.18.2 |
| 1.06 | 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm | 150 | Mtr | 170 | ₹25,500 | 7.3.1 |
| 1.07 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SMD Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Minimum lumen output 1300 lm | 30 | Each | 1,046 | ₹31,380 | 16.1 |
| 1.08 | 1170mm(+/-10%) LED batten with min. lumen output 2200 lm | 120 | Each | 492 | ₹59,040 | 16.5 |
| 1.09 | Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR | 70 | Each | 580 | ₹40,600 | 16.10.1 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.76 MB
Tender9.pdf
Tender Documents • 11.33 MB
BOQ_1014042.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid