Recycle and Reuse arrangement for backwash water at WTP under Gunupur Municipality

Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge.

Supplying all labour and T&P for Filling in foundation and plinth with sand watered and rammed including cost, conveyance, royaliti to the work site etc. all complete. as per direction of the engineer–in–charge.

Supplying all materials labour and T & P for Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge

Supplying all labour and T&P for Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete. as per direction of the engineer–in–charge.

Supplying all labour and T&P for R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete . as per direction of the engineer–in–charge.

Supplying all labour and T&P for R.C.C work in ground floor of M-30 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete. as per direction of the engineer–in–charge.

Supplying all labour,materials and T&P for Cement concrete (1:11/2:3) with 12mm.size crusher broken hard Granite chips for R.C.C.work including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete. as per the direction of Engineer-in-charge etc all complete.

Supplying all labour and T&P for fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification etc. all complete as per direction of the engineer–in–charge.

Supplying all labour and T&P for Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete. as per direction of the engineer–in–charge. R.C.C. Foundation, Plinth Band, Footings, Column Base, Mass Concrete & Precast Slabs

Floor & Roof Slabs, Landings, Balconies, Projecting, Sun Shades and Chajja

R.C.C. Beams, Column, Grider and Bressmer

Supplying all labour and T&P for Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:4) in foundation and plinth all complete. as per direction of the engineer–in–charge.

Supplying all labour and T&P for Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:4) in superstructure all complete. as per direction of the engineer–in–charge.

Supplying all materials, labour, T&P and making 12 mm. thick cement plaster in cement mortar (1:6) for brick work including watering, curing, conveyance of all materials to work site, payment of royalty roof slab including cost conveyance of all materials to the work site all complete. contractor profit & labour cess etc, all complete. as per direction of the engineer–in–charge.

Supplying all materials, labour, T&P and making 16 mm. thick cement plaster in cement mortar (1:6) for brick or stone masonry work including watering, curing, conveyance of all materials to work site, payment of royalty contractor profit & labour cess etc, all complete. as per direction of the engineer–in–charge.

Supplying all materials, labour, T&P and and providing priming 1 coat with any approved primer including all materials, conveyance, contractor profit & labour cess etc, all complete. as per direction of the engineer–in–charge.

Supplying all materials, labour, T&P and and providing two coat of weather coats with any approved shades including cost of conveyance, brushes, sundries, with any approved primer including all materials, conveyance, contractor profit & labour cess etc, all complete. as per direction of the engineer–in–charge.

Supplying all materials, labour & T&P for Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with & without cost of precast tiles. using Ceramic Wall Tile (300mm x 450mm) Gold Category, Digital/Digital High lighter (Premium Quality) (Make - Khajaria/Somany) etc. all complete as per direction of Engineer-in-Charge.

Supplying all materials, labour & T&P for Fixing Tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with incluiding cost of precast tiles Gold Category, Digital Prints Matching Floor Tile (Premium Quality)Floor Tile - (Make - Khajaria/Somany) etc. all complete as per direction of Engineer-in-Charge.

Supplying all materials, labour and T&P for Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete excluding cost of laminated board etc all complete as per direction of Engineer-in-Charge.

Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P excluding cost of glass etc complete as per direction of Engineer in Charge.

Supplying all materials, labour and T&P for Providing and fixing to wall or ceiling and floor UPVC- ASTM Standard (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. as per direction of Engineer-in-Charge. 32mm dia UPVC pipe

Supplying all materials labour T & P for Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete. as per direction of Engineer in Charge. 150 mm dia Push-on joint

Supplying all materials labour T & P for laying in trenches following sizes M.S pipes conforming to I.S. Specification all complete. as per direction of Engineer in Charge. 100 mm dia M.S. Pipe x 4.50 mm Thick (OD 114.3)

150 mm dia M.S. Pipe x 6.30 mm Thick (OD 165.1)

200 mm dia M.S. Pipe x 6.30 mm Thick (OD 219.1)

Supplying of following sizes M.S specials conforming to I.S. Specification incluiding cost conveyance etc all complete as per direction of Engineer in Charge. 100 mm dia x 10 mm thick M.S. Flange

150 mm dia x 12 mm thick M.S. Flange

200 mm dia x 12 mm thick M.S. Flange

100mm dia x90* Bend

150mm dia x90* Bend

200mm dia x90* Bend

Supplying all Materials , labour and T&P for Providing flanged joints conforming to IS:3114-1994 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete as per direction of Engineer-in-charge. 100 mm dia Flanged Joint

150 mm dia Flanged Joint

200 mm dia Flanged Joint

Supplying all Materials , labour and T&P for fitting fixing MJ Socket of different of D.I. specification including testing, commissioning etc all complete as per direction of Engineer-in-charge. 100 mm dia MJ Socket

150 mm dia MJ Socket

Supplying all materials labour and T & P for fixing of Ductile Iron sluice valve or non-return valve (Talis/Kirloskar/Vag) with double flanged ends for water works purpose of the following diameter including testing of joints as per specification all complete. 100 mm dia S.V.

150 mm dia S.V.

200 mm dia S.V.

Supplying all materials labour T&P for cutting of G.I /M.S pipe through cutting machine tools at site including hire charges of machinery etc & cost & carriage of all materials to the works site etc all complete as per direction of Engineer in charge.

Supplying all materials labour T&P for welding of C.I/M.S pipe through generator at site including cost of all consumables and transportation of all T&P welding machine , generator etc to the works site etc all complete as per direction of Engineer in charge (Repairing of Existing M.S line and new pipeline)

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in st

air case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.

Supplying of 2.0 HP KSB/Kirloskar make desludging mud pump set to run with the voltage range 440 V +/- 10 % with all accessorieshaving head range 8.0 m & dischage 0.023 cum/sec including cost conveyance of all materials to the work site etc. all complete. 2 nos. of 2.5 HP pump set = 5.0 HP

Supplying of 4.0 HP KSB/Kirloskar make Submersible pump set to run with the voltage range 440 V +/- 10 % with all accessorieshaving head range 12.0 m & dischage 0.0173 cum/sec including cost conveyance of all materials to the work site etc. all complete. 2 nos. of 4.0 HP pump set = 8.0 HP

Supplying of direct on line (DOL) starter 3 phase suitable for 2.0 HP desludging mud pump set having relay range 17.4 to 24.0 contact rating 25A of BCH make including cost conveyance to the work site. etc. all complete. 2 nos. of 2.5 HP Control Panel = 5.0 HP As per SR 2022 page no. 239, item No. 9 (iv)

Supplying of direct on line (DOL) starter 3 phase suitable for 4.0 HP pump set having relay range 17.4 to 24.0 contact rating 25A of BCH make including cost conveyance to the work site. etc. all complete. 2 nos. of 4.0 HP pump set = 8.0 HP As per SR 2022 page no. 239, item No. 9 (iv)

Supplying all materials labour T&P for of 35 mmsq. 4 core Aluminium armoured cable , of polycab make including cost conveyance to the work site etc all complete as per direction of Engineer in charge. As per Price list enclosed

Supplying all materials, labour and T & P for fitting fixing of 630 Amp 4 pole main switch including cost conveyance to the work site etc all complete as per specification and direction of Engineer-in-charge. As per Price list enclosed

Supplying all materials, labour and T & P for fitting fixing of 200 Amp 4 pole changeover switch including cost conveyance to the work site etc all complete as per specification and direction of Engineer-in-charge. As per Price list enclosed

Supplying all materials labour T&P for of 6 mmsq. 3 core copper flat cable , of polycab make including cost conveyance to the work site etc all complete as per direction of Engineer in charge. As per Price list enclosed