REPAIR AND MAINT OF CERTAIN STEEL AND OTHER FURNITURE AT GE IMA DEHRADUN

Amount

Charpoy GI pipe ( Drg No FD-220)

S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow ISI marked heavy duty of charpoy. Make : Jindal/Ravindra/Tata

Conversion of 32 mm dia long rail obtained from item No 1.01 above two short rail after cutting and one short rail threading both ends and fixing to 3 way 32 mm dia existing elbow. Note : Count one short rail each for this item

Conversion of 32 mm dia short rail obtained from item No 1.02 above two leg after cutting and one leg threading one ends fixing to 3 way 32 mm dia existing elbow at one end threaded and cover the other end with hard rubber/PVC shoe. Note : Count one leg each for this item

S & F in repairs 3 way 32 mm dia GI elbow ISI heavy duty marked complete as per specified.

S & F in repairs check nuts of 32 mm dia ISI marked complete as per specified.

S & F in repairs 12 mm BWR phenol bonded commercial plywood of existing size including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood. Make - Archid Ply/Green Ply/CenturyPly

S & F in repairs MS flat of size 40x4mm with two Nos nut & bolts as stiffner shall be fitted for support of plywood.

S&F FMN Holder duty welded and dismentling the unsv one

Converstion of Charpoy GI pipe ( Drg No FD-220) With Newar into Hard Top

S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow heavy duty of charpoy. Make : Jindal/Ravindra/Tata

Conversion of 32 mm dia long rail obtained from item No 2.01 above two short rail after cutting and one short rail threading both ends and fixing to 3 way 32 mm dia heavy duty existing elbow. Note : Count one short rail each for this item

Conversion of 32 mm dia short rail obtained from item No 2.02 above two leg after cutting and one leg threading one ends fixing to 3 way 32 mm dia existing elbow at one end threaded and cover the other end with hard rubber/PVC shoe. Note : Count one leg each for this item

S & F in repairs 3 way 32 mm dia GI elbow ISI marked heavy duty complete as per specified.

S & F in repairs check nuts of 32 mm dia ISI marked complete as per specified.

S & F in repairs 12 mm BWR phenol bonded commercial plywood inlieu of old Newar including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood. Make - Archid Ply/Green Ply/CenturyPly

S & F in repairs MS flat of size 40x4mm with two Nos nut & bolts as stiffner shall be fitted for support of plywood.

S&F FMN Holder duty welded and dismentling the unsericeable one.

Almirah steel large (FD-67/1031)

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed (Make of Lock- Harrison)

S & F stainless steel Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting) (Make of Lock- Harrison)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer.

Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/Berger/Shalimar and shade of colour as per direction of Engr-in-Charge.

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge/GE.

Table office clerk steel (FD-84/1003,1004 )

S & F following components of Table office cleark steel including dismantling unservicable one all as specified and as directed. Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade & quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer

Lock of 4 levers with duplicate keys of approved size

Top made of 18mm thick pre-laminated MDF board of approved shade duly post forming laminates all around complete Table office Cleark

PVC shoe

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed

Renewal of following unserviceable parts of "Table tublar/Allwyn steel" with suitable new parts of existing shape & size complete to match the original and directed by Engr-In-Charge.FD-119

Top made of 18mm thick pre-laminated MDF board of approved shade duly edgin with Post forming all around complete Table .

S&F New lock of 4lever with duplicate key of approved quality. (Make: Godrej/Harrison/Link/Lico)

Repair of u/s drawer as shown on drg and directed by Engr-In-Charge.

S&F of Rubber Caps

M&L for two or more coat spray painting of synthetic enamel paint on old painted surface with high class finish, including necessary scrapping, denting/welding and leveling with filling paste as specified & directed by Engr-In-Charge. (Make: Asian/ Berger/ Nerolac).

Table office officer Steel (FD-84/1003,1004 )

S & F following components of Table dinning ORs steel including dismantling unservicable one all as specified and as directed. Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade & quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer

Lock of 4 levers with duplicate keys of approved size and make.

Side panel made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade of approved quality over a coat of primer both inside and outside including preparation of surfaces.

Top made of 18mm thick pre-laminated MDF board of approved shade duly duly post forming laminates all around complete Table office Officer Steel

PVC shoe

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed

Renewal of following u/s parts of "Modular Workstation" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Incharge. TP

S&F of 45mm (W) X 580mm (L) Powder coated "Profile Cover" shall be of die cast made up of 1.5mm thick aluminium with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 45mm (W) X1200mm (L) Powder coated "Profile Cover" shall be of die cast made up of 1.5mm thick aluminium with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 45mm (W) X 880mm (L) Powder coated " Profile Cover" shall be of die cast made up of 1.5mm thick aluminium/PVC with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 1200mm (L) Powder coated "Half Round Profile Cover for 45mmx45mm profile "shall be of die cast made up of 1.5mm thick aluminium/PVC with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 100mm (W) x 555mm (L) Powder coated "Raceway Cover" shall be of die cast made up of 1.5mm thick aluminium/PVC with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 100mm (W) x 855mm (L) Powder coated "Raceway Cover" shall be of die cast made up of 1.5mm thick aluminium/PVC with a waterfall edge for a continuous transition from horizontal to vertical trim.

S&F of 2 way Powder coated "Connectors Cover" shall be of 1.5mm thick aluminium/PVC die Cast for 45mm Profile Cover.

S&F of 1 way Powder coated "End Connectors Cover" shall be made of 1.5mm thick Aluminium/PVC die Cast for 45mm Profile Cover.

S&F of "Keyboard tray channel base" 300mm (L) made of CRCA Sheet 1.1 mm thick zinc plated.

S&F of "Keyboard Tray top" made of 25mm thick top dual side 0.8mm Laminate board size 500X350mm.

S&F of "Worktop" made of 25mm thick dual side 0.8mm Laminate board with 2mm thick PVC beading size 600X900mm& Laminate colour code – Oxford Cherry as per site.

S&F of "Side panel" made of 12mm thick dual side 0.8mm Laminate board size 600X600mm.

S&F of "Front panel" made of 12mm thick dual side 0.8mm Laminate board size 600X900mm.

S&F of "Footrest top" made of 18mm thick dual side 0.8mm Laminate board size 150X900mm.

S&F of Glass with frosted design as per site 5mm thick size of 300X560mm.

S&F of Glass with frosted design as per site 5mm thick size of 300X860mm.

S&F of Accessories –Wire Manager Cap

S&F of Accessories –Level adjuster for Panel & Worktop

Tightening of complete modular work station by suitable size nails & screw as directed by Engr-in-Charge on site.

Almirah steel med (FD 67/1032)

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed (Make of Lock- Harrison/Reena/Link)

S & F Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed.

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting) (Make of Lock- Harrison)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer.

M&L for Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/BerEngr-in-Charger/Shalimar and shade of colour as per direction of Engr-in-Charge.

M&L for Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Chair steel tubular with/ without arms (FD-75 M)

S & F of suitable size new synthetic foam of 75mm thick with 32 density for seat duly coverd with synthteic tepastry/leatheratte raxine of approved shade and quality fitted on 12 mm BWR Plywoood in lieu of old Seat frame of Chair steel tubular with/ without Hnadle fixed with screws 4 Nos and nuts to the chair frame alongwith MS flat (whereever required)complete all as per drawing. including dismantling unservicable one all as specified and as directed.

S & F of suitable size new synthetic foam of 75mm thick with 32 density for Back duly coverd with synthteic tepastry/leatheratte raxine of approved shade and quality fitted on 12 mm BWR Plywoood in lieu of old Seat frame of Chair steel tubular with/ without Hnadle fixed with screws 4 Nos and nuts to the chair frame alongwith MS flat (whereever required)complete all as per drawing. including dismantling unservicable one all as specified and as directed.

S & F Handle made of Teak wood duly painted with two coats of synthetic enamel paint of approved shade and quality and fixed to the chair tubular with arms with screws of suitable size complete all as per drawing including dismantling unservicable one all as specified and as directed.

S & F MS Flat size 25 x 25 x 4mm thick welded/Screwed at four corner at bottom of the seat only to support and screwed with the seat at two places complete all as per drawing. including dismantling unservicable one all as specified and as directed.

M&L for preparation of sufaces and painting with synthetic enamel paint BL Greay colour/apporoved shade to chair steel tubular with without arms including 04 Nos of PVC bushes to the bottom of the chair frame and 02 Nos of PVC caps on the top of the frame complete all as specified and directed.

Almirah small steel (FD 67) FD-243

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed (Make of Lock- Harrison//Link)

S & F mild steel Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed.

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of zinc primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting) as per satisfaction of engr-in-charge/GE. (Make of Lock- Harrison)

S & F shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of directed shade by Engr-in-Charge over a coat of primer.

M&L for Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/BerEngr-in-Charger/Shalimar and shade of colour as per direction of Engr-in-Charge.

M&L for Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Almirah steel med 1/2 Hanging ,1/2 Shelves (FD 1034)

S & F Lock 7 lever with duplicate keys components of Almirah steel med including dismantling unservicable one all as specified and as directed (Make of Lock- Harrison/Reena/Link)

S & F M.S Handle 100 mm size chromium plated Heavy components of Almirah steel med including dismantling unservicable one all as specified and as directed.

S & F 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside and outside Two coat of spray painting of Hammertone paint (pattern of hammer tone shall be 0.06 gram silicon/kg) shall apply after preparation of surface all as specified and shown on drawing. Note for steel painting;- All steel surface shall be done with spray painting) of paints as approved by GE. (Make of Lock- Harrison)

M&L for Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/BerEngr-in-Charger/Shalimar and shade of colour as per direction of Engr-in-Charge.

M&L for Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Renewal of following unserviceable parts of "Almirah glazed steel " with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. FD 104(M)

S&F New lock of 6 lever with duplicate key of approved quality and make. (Make: Godrej/Harrison/Link/Lico)

S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

S&F new mild steel Chromium Plated handles complete with nut and bolt as approved by GE.

S&F new M.S hinges (75mm) medium weight.

S&F of new legs made out of 1.00 mm thick MS sheet to match the original as shown on drg and directed by Engr-In-Charge.

S&F of suitable pattern MS clamps for holding of almirah shelves.

S&F of new glasses of existing shape & size as shown on drg and directed by Engr-In-Charge.

S&F new bush (chakri) of suitable pattern for the locking system.

S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel.

M&L for Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/BerEngr-in-Charger/Shalimar and shade of colour as per direction of Engr-in-Charge.

M&L for Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Renewal of following unserviceable parts of "Book Case glass front steel" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD-90(m) FD-1028

S&F New lock of 4 lever (set of 4 lock) with duplicate key of approved quality. (Make: Godrej/Harrison/Link/Lico)

S&F new CP handles complete with nut and bolt of standard size.

Repair of u/s sliding shutter as shown on drgs

S&F of new glasses of 4mm thick best quality ISI marked as specified & directed.

M&L for Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/BerEngr-in-Charger/Shalimar and shade of colour as per direction of Engr-in-Charge.

M&L for Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Locker Bed Side Steel (FD-1029, FD-257)

S & F Hasp and Staple of 100 mm size chromium plated Heavy components of Locker steel including dismantling unservicable one all as specified and as directed.

S & F Hasp & stapple chromium plated components of Locker steel including dismantling unservicable one all as specified and as directed.

S & F leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of approved shade & quality over a coat of primer.

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size, Haps and Staple of approved quality, painting with one coat of synthetic enamel paint shade as directed by Engr-in-Charge over a coat of primer inside and outside and Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall be applied after preparation of surface all as specified and shown on drawing. Note:- All steel surface shall be done with spray painting with paint as approved. Make of Lock- Harrison/Rina/Link

Removing the existing worn out side holder with 20mm dia aluminium conduit pipe of locker bed side steel and S & F new side holder with 20mm alluminium conduit pipe as per existing. Shape and size shown on drawing all as specified and directed by Engr-in-Charge.Drg No FD-1029

Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall after preparation of surface all as specified and shown on drawing directed by Engr-in-Charge.

M&L for Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/BerEngr-in-Charger/Shalimar and shade of colour as per direction of Engr-in-Charge.

M&L for Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including dents/bends all as specified and as directed. Note Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as per direction of Engr-in-Charge.

Locker Bed Side Steel( SKD-562 )

Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) shall after preparation of surface all as specified and shown on drawing directed by Engr-in-Charge.SKD-562

Removing the existing unserviceable handle and S & F new handle chromium plated 100mm in Heavy patteren all as specified and directed by Engr-in-Charge.SKD-562

3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

Removing the existing worn out side holder and hanging conduit pipe of locker steel and S & F of new side holder and hanging conduit pipe as per existing shape and size shown on drawing and all as directed by Engr-in-Charge.SKD-562

Taking down old unserviceable existing lock of locker steel and S & F new lock 7 lever duplicate key all as specified and directed by Engr-in-Charge. SKD-562

Removing the existing unseviceable hinges and S & F new hinges mild steel medium weight duly welded as per existing shape and size all as specified and directed by Engr-in-Charge.SKD-562

S & F door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 7 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of directed shade by Engr-in-Charge over a coat of primer inside. And outside Two coat of spray painting of Hammertone paint ( pattern of hammertone shall be 0.06gr silicon/kg) Shall after preparation of surface complete all as specified and shown on drawing. Note :- All steel surface shall be done with spray painting and Make of Lock- Harrison

M&L for Preparation of old painted inner steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including dents/bends all as specified and as directed. Note: Paint shall be make of Asian/BerEngr-in-Charger/Shalimar and shade of colour as per direction of Engr-in-Charge.

M&L for Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of spray painting of Hammertone paint (pattern of hammertone shall be 0.06 gram silicon/kg) of approved quality including removal of dents/bends all as specified and as directed. Note:- Paint shall be make of Cosmos/MRF Vapcoure and shade of colour as approved by Engr-in-Charge.

Table 3'X2' (900mmx600mm) Steel with/without drawar (FD-1008-1007).

Removing the existing unserviceable top of Table and S & F the same made of 18mm thick pre laminated MDF board duly post forming laminates one side laminated finish rest all as specified and directed

S&F Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of approved shade & quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 4 lever to drawerand dismenteling of unsv one.

Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge shape complete all as specified and shown on drg .All Joints duly welded/Screwed as per Drgs

M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Olive green synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of Asian/Shalimar/BerEngr-in-Charger approved by Engr-in-Charge.

Table steel 3' x 1½' (900mm x 450mm) examination (covered with 1mm thick black sun mica) FD -GE/PN/F-4

Removing the existing unserviceable top of Table and S & F the top made of 18mm thick pre laminated MDF board duly post forming laminates rest as specified and as directed.

Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge shape complete all as specified and shown on drg .All Joints duly welded/Screwed as per Drgs

M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Olive green synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of Asian/Shalimar/BerEngr-in-Charger approved by Engr-in-Charge.

Renewal of following unserviceable parts of " Form Without Back/Form with Back " with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD-77,FD 1027

S&F new Seat of first class hard wood teak duly polished and fixed as per drg and directed.

S&F new Back of first class hard wood teak duly polished and fixed as per drg and directed.

S & F new Seat Frame of Exesting size made from 1.5mm thick 25 mm M/S tube as exestingduly welded

S & F new Legs of Exesting size made from 1.5mm thick 25 mm M/S tube as exestingduly welded

Tightening of complete form without back by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats of spray painting and walnut polish on steel & wooden surface of form without back with high class finish, including necessary rubbing, denting and smoothness surfaces all as directed by Engr- in-charge.

Repair/Relacement of following u/s parts of "Table dining to seat 18 persons (5850x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (Set of three pieces) FD No. BZ/FD/01

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg duly post forming lamination

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Renewal of following u/s parts of "Table dining to seat 28 persons (9100x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.(Set of four pieces)FD No. BZ/FD/01

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg duly postforming lamination

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Renewal of following unserviceable parts of "Table dining to seat 32 persons(10400x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.(Set of five pieces) FD No. BZ/FD/01

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg duly postforming lamination

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Renewal of following unserviceable parts of "Table dining to seat 36 persons(11700x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.(Set of five pieces) FD No. BZ/FD/01

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg duly postforming lamination

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Renewal of following u/s parts of "Table dining to seat 50 persons (16250x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.(Set of seven pieces)FD No. BZ/FD/01

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg duly postforming lamination

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Renewal of following unserviceable parts of "Table dining to seat 56 persons(18200x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (Set of eight pieces) FD No. BZ/FD/01

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg duly postforming lamination

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Renewal of following u/s parts of "Table dining to seat 80 persons(23637x1050mm)" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (Set of eleven pieces) FD No. BZ/FD/01

S&F of legs as per drg and as directed.

S&F of long rail as per drg and as directed.

S&F of short rail as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg duly postforming lamination

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Teapoy Verandah FD-255,

Removing the existing unserviceable top of Table and S & F the same made of 18mm thick pre laminated MDF board duly postforming, one side laminated finish rest all as specified and directed

Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge shape complete all as specified and shown on drg .All Joints duly welded/Screwed as per Drgs

M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat ofapproved shade synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of Asian/Shalimar/BerEngr-in-Charger approved by Engr-in-Charge.

Table dinning Steel 900x900x760mm

Removing the existing unserviceable top of Table and S & F the same made of 18mm thick pre laminated MDF board duly postforming, one side laminated finish rest all as specified and directed

Removing old unserviceable frame/Leg and S & F New Frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge shape complete all as specified and shown on drg .All Joints duly welded/Screwed as per Drgs

M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of Olive green synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of Asian/Shalimar/BerEngr-in-Charger approved by Engr-in-Charge.

Table steel computer 1220x610x750

S&F new top of 18mm thick prelaminated MDF board duly postforming laminated of exesting size

S&F new side plank of 18mm thick prelaminated MDF board as shown on drg.

S&F new keypad tray of 18mm thick prelaminated MDF board including beading.

S&F of new heavy duty mild steel ball bearing slides/telecscopic channel for smooth functioning of key board drawer as approved by GE.

S&F of new bottom shelf of 18mm thick pre- laminated MDF duly postforming laminated of exesting size

S&F of new hard rubber shoes (black)

Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats synthetic enamel BL Gray paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed by Engr- in- charge.

Rack steel large 6 Tier FD-129(M)/1038

S & F following components of Rack steel 6 tier including dismantling unservicable one all as specified and as directed. MS angle iron of size 30 x 30 x 3mm thick, 1905mm long including painting with one coat of synthetic enamel paint od approved shade & quality over a coat of primer.

Shelves of size 760 x 915mm made of 1mm CRCA sheet including painting with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

M&L for Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat or more coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed

Book Shelf Open Steel Small /Large ( FD 69)

S & F following components of Book Shelf Open Steel Large and Small including dismantling unservicable one all as specified and as directed. MS angle iron of size 30 x 30 x 3mm thick, 1905mm long including painting with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

Shelves of size 760 x 915mm made of 1mm CRCA sheet including painting with one coat of synthetic enamel paint of approved shade & quality over a coat of primer.

M&L for Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat or more coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed for Book Shelf Open Large

M&L for Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat or more coat of synthetic enamel paint of approved shade & quality both inside and outside complete all as specified and as directed for Book Shelf Open Small

Desk FD -1021

S&F new top Box of Desk of 18mm thick prelaminated MDF board duly all joints shall be coverd with PVC Tape fix with adhesive of exesting size and dismenteling the UNSV one as directed and shown on drg .

S&F new M/S Tube of 25 mm 1.5mm thick of leg/stiffener/rails dismenteling the UNSV one of 18mm thick prelaminated MDF board as shown on drg.

Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.

S&F new rubber shoes .

M&L for two or more coats synthetic enamel BL Greay paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed by engr in charge.

Student revolving chair without hand rest(TP)

S&F suitable new 12 mm thick hot pressed plywood complete to match the original seat as shown on drg of approved make.

S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for seat.

S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 350/- per RM) alongwith PVC lipping all round the seat fixing as exesting

S&F suitable new 12 mm thick hot pressed plywood for back as shown on drg.

S&F suitable new fabric & moulded polyurethane foam of 50mm thick with 32 density for back.

S&F suitable new tapestry cloth/leatherite rexine (cloth/rexine shall not be less than 300/- per RM) alongwith PVC lipping all round the back.

S&F suitable hydraulic system with droplift mechanism of backrest adjusted as per existing shape & size.

S&F suitable MS bearing of existing shape & size of various type chair revolving steel.

S&F new wheeled 4/5 prong base of existing shape & size with nut & bolts to chair revolving steel of various types.

S&F suitable caster wheels of existing shape & size with nut & bolts.

M&L for Two or more coat painting of synthetic enamel paint on frame of Chair computer with high class finishing including necessary welding and smoothness of surface.

Repairs of Office chairs for work stations of Trade pattern

S&F suitable hydraulic system with droplift mechanism of backrest adjusted as per existing shape & size.

S&F suitable MS bearing of existing shape & size of various type chair revolving steel.

S&F new wheeled 4/5 prong base of existing shape & size with nut & bolts to chair revolving steel of various types.

S&F suitable caster wheels of existing shape & size with nut & bolts.

Charpoy OR steel FD- 220R

Removing old unserviceable plywood of double sleeping bunk/charpoy and S & F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge

Removing old unserviceable long rail and S & F new Long Rail of existing size, shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge

Removing old unserviceable Short Rail rail and S & F new Short Rail of existing size shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer -in- Charge

Removing old unserviceable Legs and S & F legs converstion from Short Rail item No. 34.02 of existing size shape all as specified and shown on drg with All Joints duly welded/screwed as per Drgs complete directed by Engineer-in-Charge

Preparation of old painted outer steel sufaces by scraping with emary paper, cleaning, dusting and applying Two coat of spray painting of approved shade of approved quality paint

Display Board (2400 x 1200mm)

S&F of new Green Blazer Cloth of approved quality for Display Board 2400 x 1200mm and dismentling the UNSV one

M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

S&F of uphlostray of aprroved quality and shade and letheratte raxine of Sofa Set double Seat(TP), Sofa Set Single Seat(TP) , Sofa Set 2 Seater SK-577 Sofa set 05 Seater make of Godrej including minor surface reparing whereverey required and polishing with lacquer polish for smoothness of surface as exesting and directed by Engr-in-charge.

Renewal of following U/S parts of Wodden Bench & Desk (TP) with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge

S&F new Seat/Back top of Teak wood as exesting

Stiffeners (foot rest)

Buffers

Tightening of complete table by suitable size nails made of bamboo & wood corner(whereever required) as directed by Engr-in-Charge on site.

M&L for one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Renewal of following unserviceable parts of "Table Executive 6'X3.5 with Side Cabinet/Drawer suitable new parts (MDF Board of IS Grade 12406 teak finish as match with exesting of existing shape & size complete to match the original .(Different makes and pattern of Table Executive.

S&F Side Planks (builtin legs)

Top of Table executive as exesting 6'X3.5

Drawer of Cabinet with Telescoipic chaneel and Knob/handle

Tightening of complete table by suitable size nails/Clamps & wood corner as directed by Engr-in-Charge on site.

Rack shoe steel (FD/E6/Map/02 (R).

S&F new wire mesh of 3 mm of duly wleded/fitted in tube frame of rack shoes steel .

Change of tubler frame of exesting size and replace the exesting one

Rubber Shoes

Spray Painting two or more coats of synthetic enamel of black shade paint on old painted surface

Renewal of following unserviceable parts of "Bed Hard with ply top" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.FD-21, 246, 247, SK-

S&F 04 mm thick both side teak face ply all over the head rest of bed including teak wood beading.

S&F 04 mm thick both side teak face ply all over the foot rest of bed including teak wood beading .

Removing old unserviceable head board and supply & fixing new head board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete teak wood beading shall be provided all around as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note:- Playwood shall be make of Archid Ply/Green Ply/Century Ply

Removing old unserviceable foot board and supply and fixing new foot board made out of Ist class hard wood (Sisham/teak) frame including 4 mm thick one side teak face ply ISI marked for both sides and complete 4mm thick teak wood beading shall be all around provided as per drg. Exposed to view wooden, ply surfaces shall be french polished with high class glossy finish. Note Playwood shall be make of Archid Ply/Green Ply/Century Ply

S&F new long rail made out of teak wood size1800x90x35mm as per drg and directed by Engr in charge.

S&F new short rail/center stiffner made out of teak wood size 900x90x35mm as per drg .

S&F new clamps for holding of MNF set as per drg and directed by Engr in charge.

S&F new 12mm thick BWR phenol bonded commercial plywood of size 1800x900mm , fitted with suitable nut & bolt complete to match the existing shape and size.

Tightening of complete bed by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat Lacquer polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

M&L for Spray Painting two or more coats of synthetic enamel of approved shade paint on old painted surface to under mentioned items of steel furniture with high class finishing including necessary scrapping, denting ,welding and smoothness surfaces as shown on drg and directed by Engr-in-charge.

Chair CBA special with hand rest.FD-260

Ladder for loft.FD-44, 238

Desk stand lecture steel FD-1022

Locker six door steel TP

Metal shelving Rack adjustable type small FD-69 (M)

Metal shelving rack adjustable type large FD-69 (M)

MNF frame all type FD-220, 246, 247

Rack side steel with four tray FD-97(M), 1023

Rack adjustable six tiers FD-106(M) 1038

Stool steel size 305x305x510mm FD-81(M)

Steel Cup board TP

Table steel General Tubular TP

Trestle store room Iron FD-1043

Waste paper basket steel GE/PN/F-16

Raghav supplier & contractor (BID ID -3334229)

avtarsinghchaddha (BID ID -3327083)