Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | VIPIN P L L3 | LIPIN M V L1 | BABU L2 |
|---|---|---|---|---|---|---|
| 1.00Truss work | ||||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 480.4 | kg | 234 ₹1,12,413.6 | 193 ₹92,717.2 Lowest | 230.93 ₹1,10,938.77 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 280.68 | kg | 190 ₹53,329.77 | 159 ₹44,628.6 Lowest | 187.05 ₹52,501.76 |
| 1.00 | OD517258/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.(modified DAR 12.50) | 107.95 | sqm | 635 ₹68,551.43 | 538 ₹58,079.79 Lowest | 633.66 ₹68,406.77 |
| 1.00 | OD517259/2025-2026:Providing and fixing precoated galvanised steel sheet roofing accessories 0.35 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete : Ridges plain ( 450 mm or nearest available) (Modified DAR 12.51.1) | 27 | metre | 540 ₹14,580 | 455 ₹12,285 Lowest | 535.79 ₹14,466.33 |
| 1.00 | OD517426/2025-2026:Providing and fixing on wall face square type (or nearest available) Section uPVC rain water gutter Pipes of 150mm (6 inch) or nearest available 4 kg/cm2 pressure rating conforming to IS: 13592 Type a including Jointing ( including cutting chamfering joint lubrication if necessary) securely fixed using galvanized iron (GI) brackets or clamps at max 1.0 mtr intervals leak testing making good surface complete in all respects as per manufacturers specifications and direction of the Engineer - in- Charge (Modified DAR 12.41.2) | 41.5 | metre | 560 ₹23,240 | 475 ₹19,712.5 Lowest | 559.21 ₹23,207.22 |
| 1.01 | 50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | 30 | metre | 270 ₹8,100 | 223 ₹6,690 Lowest | 263.31 ₹7,899.3 |
| 1.01 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 5.04 | sqm | 390 ₹1,965.6 | 328 ₹1,653.12 Lowest | 386.16 ₹1,946.25 |
| 1.01 | 4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.38 | cum | 11,760 ₹4,445.28 | 9,993 ₹3,777.35 Lowest | 11,756 ₹4,443.77 |
Tender Value
₹2.8 L
EMD Value
₹7,095
Closing Date
1 Jun 2026, 4:00 pmClosed
Assistant Enginner LID and EW , Kattakampal G P
Assistant Enginner LID and EW , Kattakampal G P, 680544
Womens Vocational Training Centre Improvements
2026_LSGD_852247_1
Womens Vocational Training Centre Improvements-
Open Tender
Civil Works - Buildings
Item Rate
330 days
Kattakampal Grama Panchayat
Please refer Tender documents.
7 documents required · 7 mandatory
₹630
Yes
₹7,095
Yes
8 Jul 2026
23 May 2026
3 Jun 2026
23 May 2026
1 Jun 2026
23 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Truss work | |||||
| 1.001 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.2 | kg | - | - |
| 1.003 | OD517258/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.(modified DAR 12.50) | 1 | sqm | - | - |
| 1.004 | OD517259/2025-2026:Providing and fixing precoated galvanised steel sheet roofing accessories 0.35 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete : Ridges plain ( 450 mm or nearest available) (Modified DAR 12.51.1) | - | metre | - | - |
| 1.005 | OD517426/2025-2026:Providing and fixing on wall face square type (or nearest available) Section uPVC rain water gutter Pipes of 150mm (6 inch) or nearest available 4 kg/cm2 pressure rating conforming to IS: 13592 Type a including Jointing ( including cutting chamfering joint lubrication if necessary) securely fixed using galvanized iron (GI) brackets or clamps at max 1.0 mtr intervals leak testing making good surface complete in all respects as per manufacturers specifications and direction of the Engineer - in- Charge (Modified DAR 12.41.2) | - | metre | - | - |
| 1.006 | 50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | - | metre | - | - |
| 1.007 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | - | sqm | - | - |
| 1.008 | 4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1440045.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.25 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
tenderform.pdf
Tender Documents • 0.25 MB
BOQ_1440045.xls
BOQ • 0.30 MB
pa.pdf
Tender Documents • 0.26 MB
viewnit.pdf
Tender Documents • 0.03 MB
viewsbd.pdf
Tender Documents • 1.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .