SPL REPAIR TO CERTAIN BLDGS, SECURITY FENCE AND STEEL RAILING AT MH AND 2/8 GR GHUNGHORA UNDER GE DEHRADUN

Amount

Taking down Chowkhats or frame with shutter (Without taking off shutters from the frame) any description exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

S & F second-class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed.

S&F in repairs 18 to 20 mm thick solid WPC board for cupboard shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet including suitable fixed to MS guiding runners with all fittings including suitable PVC frame as per specification and drawing complete all as specified and directed.

S&F in repairs 6 mm thick solid PVC board for cupboard /shelves with one side laminated & other side plain PVC sheet complete all as specified and directed.

Taking down door shutter of any description exc. 2 sqm each complete all as specified and directed.

M&L for 30 mm thick, factory made flush shutters, BWR solid core construction, with block board core and plywood face, panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed.

S&F 200 mm long, solid in one piece stainless steel barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed.

S&F in repair 150 mm long, solid in one piece stainless steel barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size solid in one piece stainless steel handles, all in 304 grade and fixed in stainless steel screws complete all as specified and directed.

S&F 100 mm size solid in one piece stainless steel handles, all in 304 grade and fixed in stainless steel screws complete all as specified and directed.

S&F in repair magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, and fixed 250mm long complete all as specified and directed.

S&F floor door stopper of stainless steel double legged and tongue, 304 grade anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S & F in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm each pane complete all as specified and directed.

M&L for mild steel framed work as in door or gate angle or other section prepared for handing and sliding with and including hooks and hinges and steel gate doors fittings Fe-410-W. E-250 quality 'B' including dismantling of old unserviceable steel complete all as specified and directed.

Dismantling of roof AC sheeting any type (corrugated/semi corrugated, etc) in roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation unframed work complete all as specified and directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O complete all as specified and as directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old existing window complete all as specified and directed.

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old existing window complete all as specified and directed.

S&F ventilators, fixed type, with glazing bars including taking down old existing window complete all as specified and directed.

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

S&F in repair continuous (PIANO) hinges, mild steel, bright finish or electro galvanised. 30 mm width of flaps (when open) complete all as specified and directed.

S&F in repair 1mm wall thickness stainless steel 202 Gde drapery rod with incl brackets, decorative finials at both ends complete.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors Taking up or down complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors Taking up or down complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) for sub base to receive the screed complete all as specified and directed.

M&L cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement complete all as specified and directed.

M&L Glazed ceramic tiles coloured size of size 200 x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match on and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of tiles complete all as specified and directed.

M&L non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed

M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for coloured prepolished rubber moulded chequred cement concrete tile of size 30 cm x 30 cm and 20 to 22 mm thick with 3 mm spacer bar, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles complete all as specified and directed.

M & L for 20 to 25 mm thick machine cut Kota stone slab as in flooring over 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for 20 to 25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over 15 mm thick rendering in CM 1:4 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for use and waste of formwork to soffits of RCC Shelves and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of RCC Shelves or similar work thickness exc. 05 cm and not exc. 10 cm in rough finished surfaces of concrete complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slab and shelves supported on walls including demolition complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

M&L for brick work with sub class ’B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down of cement or cement lime plaster any description from brick or stone wall , ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) complete all as specified and directed. Note:- Rendering will be done in two layers complete.1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick.

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound, finished fair faces of brick/concrete surfaces even and fair without using extra cement . Note:- (i) Rendering will be done in two layers complete.1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick.(ii) WPC will be measured and paid separately.

M&L for 10 mm thick ceiling plaster in CM (1:4) on fair faces of concrete surfaces including taking down old unserviceable plaster complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered/un plastered surfaces and providing two coats of cement base paint over a coat of alkali resistant primer as on walls complete all as specified and directed.

M&L for preparation of new plastered/un plastered surfaces of wall and providing two coats of oil bound distemper as on walls complete all as specified and directed.

M&L for preparation of wall and applying wall care putty 1.00 to 1.50 mm thick to make the surface smooth complete all as specified and directed.

M&L for preparation of old plastered/un plastered surfaces of wall and providing two coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered/un plastered surfaces of wall and providing two coats of oil bound distemper complete all as specified and directed.

M & L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S& F 4 mm thick 'E' board (Classic ) in false ceiling including & fixing of frame work made of special section MS sheet glavanised with zinc coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E board with ceiling section & perimeter of angle 25x25x0.50 mm thick complete all as specified and directed.

Cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting n.exc 10 Cm in girth. complete all as specified and directed.

S&F rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old existing unserviceable water tank and removel from site complete all as specified and directed.

Supply and fixing in repair PVC connection 15 mm dia 450 mm long with bras fly nut at both ends complete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix in asian epoxy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor as complete all as specified and directed.

S&F in repair 75 mm cast iron floor trap, spun casted with grating including jointing to waste pipe fixed in cement concrete type B1 (1;2;4) complete all as specified and directed.

S & F in repair 10 liter capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

S&F in repair looking mirror of size 450x600mm mounted on decorative type PVC frame fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified and directed.

S&F in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including pop up brass waste coupling or requisite size and waste pipe for bottle trap complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair brass chromium plated overhead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

S & F in repair 15 mm dia bore chromium plated concealed stopcock, complete all as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : - JAQUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Parryware

S&F in repair 15mm bore Bib taps short body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAQUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Parryware

S&F in repair soap dish, brass, chromium plated,100X100X60mm, fixed to wall with rawal plugs and chromium plated screws complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated guard and railing size 500X125mm with brass bracket complete all as specified and directed.

S & F in repair stainless steel grating square 150 mm size complete all as specified and directed.

S&F in repairs brass chromium plated towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.

M&L for cleaning of water storage tank 500 Ltr capacity mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner complete all as specified and directed.

S&F in repairs 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover white for pedestal pattern complete all as specified and directed.

S&F in repair half stall china urinals (wall type) complete including plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed. Make : - Jaquar/URS-WHT-13261 size 340 x 310 x 660 mm/Hindware vinenzia Cat Part No 60023 Stan white pastel size 31.5 x 34.5 x 66 cm/Parryware Cat Part No Aqua seal and neutral size 360 x 345 x 565

S & F 32 mm dia waste fittings, brass chromium plated for Glaze ware sink, WHB, etc with long screwed shanks and fly nuts, flange embedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore complete all as specified and directed. Make : Jaquar CAT part no.ALI-85037/Hindware CAT part no. F-370004

S & F in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make : Jaquar CAT part no. SOL-6001B/Hindware CAT part no. F450009/Parryware CAT part no. G0665A1

S&F in repair CP brass angle cock 15 mm bore complete all as specified and directed. Make : - Jaquar CAT part no. CON-CHR-053KN/Hindware CAT part no. F200007 CP/Parryware CAT part no. G0253 A1

S&F in repair CP Health Faucet with 1.20 mtr metallic expandable tube & hook complete. Make :Parryware CAT part no. T9941A1/ Hindware CAT part no. F160013/ JAQUAR CAT part no,.ALD-573

S&F in repair Jet spray (L-Band) with 1 mtr expandable tube & hook complete all as specified and directed.

S & F in repair Towel rack long of stainless steel grade 304 complete all as specified and directed.

S & F in repair PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed.

Demolition and breaking up drain pipes of 100/75 mm bore (salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S & F in repair 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

S & F in repair 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, joints laid in trenches complete all as specified and directed.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, joints laid in trenches complete all as specified and directed.

S & F in repair UPVC (SWR) bend, 75 mm bore' complete all as specified and directed.

S & F in repair UPVC (SWR) junction single, (Single T) equal or un equal, 75 mm bore with access door complete all as specified and directed.

S & F in repair UPVC (SWR) bend, 110 mm bore complete all as specified and directed.

S & F in repair UPVC (SWR) junction single, (Single T) equal or un equal, 110 mm bore with access door complete all as specified and directed.

S & F in repair UPVC (SWR) cowl, 75 mm bore' complete all as specified and directed.

S & F in repair UPVC (SWR) cowl, 110 mm bore' complete all as specified and directed.

S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including nut and bolts and securing ends of stay to wall or roof for 75/100 mm bore CI pipe, grouted in PCC 1:2:4 complete all as specified and directed.

Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonry and re jointing the pipe joint in CM 1:3 and making good to existing surface complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Cement concrete type C2 1:3:6 (20mm graded aggregate) in foundations, filling and mass concrete as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L cement concrete 1:4:8 type D2 (40 mm graded stone aggregate) as in Cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and directed.

S&F for mild steel joist, channel, angle, or tee section, fixed independently, without connecting plates, etc. as in fencing post conforming to Fe 410 W (gde E-250 quality B) complete all as specified and directed.

S&F mild steel flat iron for securing of chain link fencing conforming to Fe 290 Gde E-165 in post and strut in fencing including fabrication i.e. cutting tops drilling holes notching for wire welding etc. complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square exc 15cm but not.exc 22.5 cm long, diameter of neck n exc12 mm complete all as specified and directed.

Supply only Chain link MS galvanised fencing any size or type weight exc 4 Kg per square meter as complete all as specified and directed.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire any size or type weight exc 4 Kg per square meter complete all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing’s and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of Cement Concrete (reinforced) reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

All as per item No 127 above, but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal rough finished surfaced surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete type B-1 (1:2:4) using 20mm graded aggregate, nominal mix in columns, pillars, piers, posts and struts complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and smooth without using extra cement.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparation of New or previously un-treated steel surfaces over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Taking down carefully existing aluminium/copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulator, sockets, wooden boards, laminated sheets from sunken boxes boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (Nominal area) PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including PVC casing and caping including accessories along with continuous earth wire 1.5 Sqmm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch.

One light/fan point controlled by one switch.

One 5 pin socket outlet 5 Amps controlled with one switch on the same board.

One 5 pin socket outlet 5 Amp controlled by one switch on independent board.

All as per item No 140 above but with 2.5 sqmm multi strand copper conductor cable for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 sqmm PVC insulated multi strand copper conductor cable as continuous earth wire complete.

S&F Switch piano flush button single pole one way 5 Amp complete all as specified and directed.

S&F Socket outlet, 5 Pin, 6 Amp 2 in 1, flush type, universal complete all as specified and directed.

S&F Socket outlet 2 in 1, 5 pin, 5 and 15 Amp flush type complete all as specified and directed.

S&F Switch piano flush button single pole one way 15 Amp complete all as specified and directed.

S&F Ceiling rose 3 terminal/pvc/polycarbonate, isolated body complete all as specified and directed.

S&F Fan regulator stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

S&F angular Lamp holder including 9W/12W, PVC/polycarbonate type with back plate suitable for angular fittings complete all as specified and directed.

S&F LED Tube light fitting of LED 20 w including required length of 1.5 Sqmm PVC multi stranded copper conductor to electrical connection from ceiling rose to connector of LED fitting including testing on complete all as specified and directed.

Supply, fixing, connecting and testing of 35 watt LED building security light die cast alluminium housing and including bracket 32 mm GI pipe bend to shape including clamp fastener, bolts, nuts & washers of min 1.2 Mtr including grouting etc and 3 core 1 sqmm PVC insulated cable from ceiling rose to light fitting complete all as specified and directed.

Supply & fix ceiling fan 1200mm sweep, 230 Volts AC single phase, 50 Hz 3 blades complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 sqmm from ceiling rose to connector, including extra GI/MS pipe down rod, as per site requirement complete all as specified and directed.

Supply & fix exhaust fans, rust proof body dynamically balanced blades for vibration free & noiseless operation, AC single phase of 55 Watts or higher wattage, 900 RPM, 230/ 240 V of size 300 mm sweep with louver & 3 core white flexible multi stranded copper conductor 23/0.0076 from ceiling rose to fan connector complete all as specified and directed.

Sheet metal enclosure MCB DB, double door , 04 way TPN, 415 volts with blanking plates wherever required complete all as specified and directed.

Sheet metal enclosure MCB DB, double door , 08 way SPN, 240 volts with 200 Amps rated bus bar with blanking plates wherever required complete all as specified and directed.

S&F MCB triple pole and neutral 240 volts, 25 to 40 Amps complete all as specified and directed.

S&F MCB single pole and neutral 240 volts, 25 to 40 Amps complete all as specified and directed.

S&F MCB single pole 240 volts, 6 to 32 Amps complete all as specified and directed.

Taking down sub main wiring of any size any type and in any position metallic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L for sub main wiring with 2 runx 6 Sqmm + 6 sqmm earth wire single core PVC insulated cable un seathed multi stranded copper conductor LT 1100 volts grade FRLS cable (ISI marked with valid CML No ) drawn in & including PVC conduit of dia not less than 25mm in concealed (ISI marked with valid CML No ) including its all fittings/accessories complete all as specified and directed.

S&F Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connecting to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (0.5 metre beyond pit to main switch), PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete.

M & L for taking down fan, ceiling cable end, dismantling blades and removing fan and blades to store including painting with two coat of synthetic enamel paint over one coat of primer and extra GI/MS pipe down rod, as per site requirement for re fixing the same with complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 4 Core complete all as specified and directed.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness all complete all as specified and directed. Note :- Only punned down sand thickness 18CM shall be measured and paid.

Supplying and laying old size bricks, laid flat ie length of brick shall be laid across the cable, common burnt clay building bricks sub class `B' designation 75 complete all as specified and directed and testing on completion complete all as specified and directed.

S&F steel tube 'light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

SRI GANESH ENTERPRISES