Providing Fire Fighting System in Civil Rest House at Naraingarh in Ambala Distt.

Amount

[10.100.1]Cement Concrete 1:8:16 Flooring 1. Cement Concrete 1:8:16 with Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size in foundation and plinth.

[10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth.

[10.63.2]Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm

[10.67.2]Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 2. Size of Tile 600x600 mm

[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)

[2.EL270] EL270. M.S. Pipe 100mm dia,

[2.EL281] EL281. 100mm dia,

[2.EL282] EL282. 80mm dia,

[2.EL297] EL297. 100 mm dia

[22.103.3]Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 3. 25 mm nominal bore

[22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

[23.6.6.2]MS CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS pipe of 25 mm dia.

[24.2.2.2]LT CABLE 2.2. Laying of underground cable 0.75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:- 16 Sq mm to 35 sqmm 2 to 4 Core

[24.2.9.1]LT CABLE 9.1. Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint. For 1.5 to 6 sqmm Cable 2 Core

[5.22]Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge.

[5.42]Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge.

[6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

[7.22.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 1. Cement mortar 1:4 (1 cement : 4 coarse sand)

Exist signage electrical (Life guard)

Hooter (life Guard)

MCP / TBS Life Guard

Providing, fixing, testing and commissioning of 100 mm dia burden type, stainless steel dia type pressure gauge ( n pump room) including barss isolation valve and pipe having caliberation of 0-15 kg/cm2.

S.S 63 mm dia short branch pipe with 16 mm dia. Nominal bore outlet with standard instantaneous tyep 63 mm dia coupling in all respects ISI marked (IS:903)

SITC of ABC type fire extinguisher ISI mark IS code 15683-2006 capacity : 09 kgs 90% Map (Mono Amonium Phosphate) pressurized with dry nitrogen Make (Fire Cut, Cease fire, Mini Max, Safex, Kanax/omax/life guard/cnp/padmini etc.

SITC of Co2 type fire extinguisher ISI mark IS code 15683-2006 (Capacity : 4.5 kg with 1 mtr long hosepipe make (fire cut, cease fire, mini max, safex, kanax) / omax/life guard /cnp/padmini etc.

SITC of pressure switches for Main, Jockey pump and standby Diesel pumps, including necessary wiring upto control panel and Ball valve.

Smoke Detector conventional type electric shaft (Life Guard)

Smoke main panel four zone life guard

Smoke Sub Panel twon zone life guard

SITC of mild steel pipe (IS:1239 Part-I) C class heavy class

SITC OF Air vessel 200MM dia x150mm height with dish top made in 6mm thick ms pipe complete with 20mm dia brass air valve , 200mm dia stop valve , pressure gauge ,stop cock, nipple

SITC of C gunmetal 2 way fire bridge connection with 150 mm butterfly valve 150 mm non return valve and i/c 18 SWG painted M.S Box 30x20x10 with MS framed front with glass panel and wors `Fire Bridge INLT` painted in bold letter written on it in red colour as required.

SITC of First-aid fire hose reel IN RED COLOUR DRUM, wall mounting swinging type complete with drum, bracket, 25mm dia stop valve and 20 mm dia. x 30 m long high pressure hose reel tubing as per IS: 1532 with gun-metal/S.S shut-off Nozzle having 5mm dia. OUTLET. the hose reel shall strictly confirm to IS: 884 : 1969.

SITC of Non-percolating hosepipe (RRL type - 1) ISI marked (is:636) 63 mm dia. x 15 m long complete with instantaneous type , /S.S 63 mm dia. ISI marked male and female couplings (IS:903-1985) bound and riveted to hose pipe with copper rivets and 1.5 mm dia. copper wire.

SITC of Single headed, S.S ISI marked oblique pattern hydrant landing valve/Yard or internal Hydrant valve with 80 mm dia. flanged inlet and 63 mm dia. instantaneous type female outlet complete with cap. and G.I. chain, twist release type lug and all accessories as per is:5290-1983

Electric shaft fire door (Gallexy fire door)