UT-01-155 Km 12 of Almora-Takula-Begeshwar MR to Jagsura-Betuli Motor Road

Amount

Earth work in hill road (hill side cutting):- Excavation in hilly area for construction of road in all types of soils & rocks with E&B and BLB as met at site , true to lines as per plan, L section , camber, super elevation as required , also including uprooting & cutting of bushes ,dressing of road surface to the required level and slopes, all lead , lift and safe disposal of surplus excavated material at suitable dumping places by mechanical means/ manual means indicated in the drawing with out damaging forest , forest land , utility and private properties ,including slip clearance during hill side cutting as directed by Engineer-in-charge and as per MORD specifications , Clause 1600,1603.1,1603.2

Construction of Hill side Kutcha Trapezoidal drain as per drawing (Top 0.60m, Bottom 0.30m & Height 0.40 to 0.60m as per site) in accordance with the requirement as directed by Engineer-in-charge and MORD Specification Clause 1606.1

Excavation in foundation for structures in all types of soils and rocks including lead, lift and disposal of surplus material as directed by Engineer-in-charge and MORD specification clause 305

X-Drainage/Drainage structure

Construction of R. R . stone masonary in cement mortar 1:5 including supply of all materials,labour,t&p&royaltyetc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 700 &1604.

X-Drainage/Drainage structure

Petty works like perapet etc.

Construction of R. R . stone masonary laid dry including supply of all materials, labour,t&p&royaltyetc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 700 &1604.

X-Drainage/Drainage structure

Construction of.C.R stone masonary laid in 1:4 cement sand mortar including supply of all materials, labour,t&p&royaltyetc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 704.4.

Culvert & Bridge

CR Stone masonry in 1:5 cement/sand mortar for abutment of minor bridges, culverts etc. including all material labour T&P etc. required for proper completion of work as directed by Engineer in charge.technical Specification Clause- 702, 704, 1202 and 1204 of MORD.

Culvert & Bridge

Coolie walling including supply of all material, labour, T&P etc. required for proper completion of the work , as directed by Engineer-in-charge and PWD specifications 8.90

For Road edging work.

For Dumping Places

HP stone filling in back of structures including supply of all material, labour, T&P etc. required for proper completion as directed by Engineer-in-charge and MORD specification clause 1604.7)

X-Drainage/Drainage structure

Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally)including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each (crate size 3.00m * 1.50m* 1.25m) as directed by Engineer-in-charge and MORD specification 1301 .

For Road edging work.

For Dumping Places

X-Drainage/Drainage structure

Providing and fixing of C.C. edge stone 12 cm X 12 cmX 60 cm Size in M-15 Cement Concrete With 4 nos. 8mm dia HYSD vertcal bars and 3 nos. 6mm dia MS bar Strrups as per approved Drawing including 2 coat White washing on valley side of formation as directed by Engineer-in-Charge and MORD specfication for Rural Roads 2014.

Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC/PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards face complete as directed by Engineer-in-charge and MORD specification Clauses1206.6.

Providing and laying of concrete for plain/reinforced concrete in open foundations for structures including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 800 , 1202 & 1203 for P.C.C grade M 10. Nominal mix 1:3:6 .

X-Drainage/Drainage straucture

Providing and laying of concrete for plain/reinforced concrete for structures including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 800 for P.C.C grade M 20. Nominal mix 1:2:4 .

Coping of parapet

Providing and laying of concrete for plain/reinforced concrete for structures including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 800 for R.C.C grade M 25

Sub Structure

Super Structure

Providing and laying of concrete for plain/reinforced concrete for structures including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clause 800 for P.C.C grade M 25.

X-drainage work

Pointing with cement mortar 1:3 including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clauses No.613.3

Plastering with cement mortar 1:6 including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clauses No.613.4

Supplying, cutting , and placing of HYSD bar reinforcement in substructure/superstructure complete (IS1786:2008 clause no. 1.6) Steel shall not be from rerolling plants and shall conform to relevent IS Code including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge as per MORD specification no. 1000

Substructure

Super structure

Tubular Steel Railing of Medium Weight Steel Channel (ISMC series) 100 mm x 50mm or Providing , fixing and erecting of 50 mm dia steel pipe railing in 3 rows duly painted as directed by Engineer-in-charge and MORD specification Clauses 1706

Drainage spouts complete as per drawing including supply of all materials, labour,T&P, royalty etc. required for proper completion of work as directed by Engineer-in-charge as per MORD Specification for Rural Roads 2014

Reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing , directed by Engineer-in-charge and MORD Specification Clause 1703. KM Stone (Precast)

Same as above 200 m stone (precast)

Providing & fixing of PMGSY Logo Board at starting point, end point and at every 2 Km distance of road length as per attached standard drawing duly painted and written and as directed by Engineer in charge. as per MORD specification Clause 1701

Providing fixing of Title Information Board with PMGSY Logo at suitable place in the starting of the road as per attached standard drawing duly painted and written as directed by Engineer in charge. as per MORD specification Clause 1701 .

Providing & fixing of Citizen Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per attached standard drawing dully painted and written as directed by Engineer in charge. as per MORD specification Clause 1701 .

Providing & fixing of Maintenance Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per standard drawing dully painted and written as directed by Engineer in charge/ as per IRC/ MORD Specification

Providing & fixing of PMGSY Logo Board at end point and every 2 Km distance of road length as per attached standard drawing duly painted and written as per MoRD specification and direction by Engineer in charge.

Providing & fixing of Semi reflective Traffic Sign Boards (cautionary, mandatory & informatory) as per attached drawing duly painted and written as per the MoRD specification and as directed by Engineer-in-charge.

Providing & fixing of Semi reflective Direction and Place Identification sign boards above board size greater than 0.90 sqm.Technical Specification Clause 1701

Direction and place indentification signs up to 0.9 sqm size board. Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and as directed by Engineer in charge. as per MORD specification Clause 1701 .

White washing of parapet walls of CD work and tree truncks White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915

Cement plum Masonry with 40% plum & 60% 1:3:7 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings

Constructoin of (200x200x300) mm size reference/level pillars in RR Mud motor stone masonary and plaster in 1:4 on three sides and top on each pegs (40 Nos./Km.) including white washing and letter writing supply of all material, labour, T&P etc. required for proper complection of work as per technical MORD specification Clause 1602.1

Constructoin of (300x300x400) mm size back cutting pillars in RR mudmotor stone masonary and plaster in 1:4 on three sides and top in front of each level pillar (40 Nos./Km.) including white washing and letter writing supply of all material, labour, T&P etc. required for proper complection of work as per technical MORD specification Clause 1602.3

Maintainance Activities:

Emergency Maintenance

Major Slip Clearance in all Type of Soil ,rock and boulders including cost of all material , machine,T&p etc required for proper compeletion of work as per mord specification of work 1611

Ist Year

Iind Year

Deploying Hydraulic excavator of 0.90cum bucket for clearence of Major slip in all type of soil rock and boulders including its operator ,pol, and all other charges required for proper compeletion of work

Ist Year

Iind Year

Providing and laying of boulder apron laid in wire crate with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and techniacal specification 1301

Ist Year

Iind Year

Coolie Walling including supply of all material, labour, T&P,royalty etc. required for proper completion of the work,as directed by Engineer-in-charge and as per PWD specifications 8.90 (For opening communication only)

Ist Year

Iind Year

Routine Maintenance- Under PBMC

Maintenance under PBMC for 1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains including minor slip clearence , reshaping ,deepening and ,regrading ,as well as catch water drains as per technical specification Clause 1907. 3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus material in approved muck disposal points as per specification clause 1903 . 4] Maintenance of scuppers & Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908. 5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909. 6] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910. 7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912. 8] Two coat white washing on parapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191.

Ist Year

Iind Year

m/s Uttaranchal Builders

Bharat Bhushan Singh

Kaira Construction

KHUSHAL SINGH ADHIKARI

Shri girdhar singh adhikari

M/S SINGHAL ASSOCIATES