Loading
Loading…
Loading…
Tender Value
₹76,868
EMD Value
₹1,537
Closing Date
29 Sept 2026, 5:00 pmDue tomorrow
The Registrar, JMI
The Registrar Secretariat, JMI
Construction of Brick Partition wall in place of existing M.S. grill and Glass Partition in Room No. 49, Department of TT and NFE (IASE) Salamatullah Block, Faculty of Education, Jamia Millia Islamia.
2026_JMI_925095_1
JMI/BD/E-NIT/No.17/2026-27
Open Tender
Civil Works
Percentage
21 days
Maulana Mohammad Ali Jauhar Marg
Please refer Tender documents.
9 documents required · 9 mandatory
₹150
The Registrar, JMI
₹1,537
7 Sept 2026
7 Sept 2026
1 Oct 2026
7 Sept 2026
29 Sept 2026
7 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | MASONRY WORK | - | - | - | - |
| 3 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level._Cement mortar 1:4 (1 cement :4 coarse sand) | 12.4 | sqm | 1,093.46 | ₹13,558.9 |
| 4 | WOOD AND P. V. C. WORK | - | - | - | - |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | - | - | - | - |
| 6 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 2.52 | sqm | 2,113.45 | ₹5,325.89 |
| 7 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). | 2.52 | sqm | 103.82 | ₹261.63 |
| 8 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | 1 | each | 1,094.48 | ₹1,094.48 |
| 9 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :_250x16 mm | 1 | each | 253.56 | ₹253.56 |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :_200x10 mm | 2 | each | 97.01 | ₹194.02 |
| 11 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :_100 mm | 4 | each | 57.94 | ₹231.76 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.25 MB
BOQ_972127.xls
BOQ • 0.31 MB
Agreement.pdf
Additional Documents • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .