Loading
Loading…
Loading…
Tender Value
₹2.2 L
EMD Value
₹5,566
Closing Date
3 Aug 2026, 4:00 pm
ASSISTANT ENGINEER
OFFICE OF THE ASSISTANT ENGINEER , KARIMBA GRAMA PANCHAYATH
AYURVEDA HOSPITAL BUILDING MAINTENANCE -Project No- 278/25-26
2026_LSGD_862513_2
02/2026-27/AE/LIDEW/KMB
Open Tender
Civil Works - Buildings
Percentage
180 days
KARIMBA GRAMAPANCHAYATH
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹5,566
Yes
25 Jul 2026
25 Jul 2026
5 Aug 2026
25 Jul 2026
3 Aug 2026
25 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Building maintenance | |||||
| 1.001 | 15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | - | sqm | 75.87 | - |
| 1.002 | OD542770/2025-2026:Supplying MP tile (Mangalore tile) of 20 mm nominal thickness - OD created from item code DAR 12.48 | - | each | 22.77 | - |
| 1.003 | OD542771/2025-2026:Fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)- Observed data created from item code DAR 12.48 | - | sqm | 212.92 | - |
| 1.004 | OD542772/2025-2026:Engaging carpenter for repair work -OD created from DSR Labour code - 0156 | - | Day | 1,256.66 | - |
| 1.005 | OD542773/2025-2026:Engaging labour - OD Created from DSR Labour Code - 0115 | - | each | 1,082.18 | - |
| 1.006 | 15.41:Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | - | sqm | 58.33 | - |
| 1.007 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | 842.14 | - |
| 1.008 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | 187.05 | - |
| 1.009 | 12.25.1:Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete ( frame work to be paid separately):12 mm thick | 1 | sqm | 1,113.8 | ₹1,112.69 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.02 MB
FOT.pdf
Tender Documents • 0.25 MB
prelim.pdf
Tender Documents • 0.08 MB
affi.pdf
Tender Documents • 0.07 MB
sbdayur.pdf
Tender Documents • 1.68 MB
BOQ_1458842.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].