CONSTRUCTION OF 50 BEDDED HOSPITAL DADA SIBA

Amount

Excavation in foundation trenches etc. in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work in jumper blasting work soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Excavation in drains and channels etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick-jumper work, blasting work, soft and hard blasting and saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil includinig shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimeter) layers when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawings, design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications, as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, and as directed by the Engineer-in-Charge including carriage of materials. Within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage materials of within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etc. up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like, up to all floor level, complete as per HPPWD specification and as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:6:12 (One cement is to six sand isto twelve graded crushed/ broken stone aggregate 40mm (Forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth in all depths, including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specification, as directed by the Engineer-in-Charge, and carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 330 kg (three hundred thirty) Killogram per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns etcetera and the like mass concrete complete as per HPPWD specification and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with minimum cement contents of 320 kg (Three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in walls (any thickness) including attached pilasters buttersses,plinth and string courses etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, GST, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 320 Kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girders, bressumers cantilevers and the like shelves and work tops etcetera in all upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 320kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/thickness and upto all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of 20 N (twenty newton) per millimeter square with cement contents not less than 320kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) design mix to obtain minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 320kg (three hundred twenty) Killogram per cubic metre for reinforced concrete chhajjas of any thickness upto all floor levels, including finishing the exposed surface with cement mortar 1:3 (one cement isto three sand) to give a smooth and even surfaces, including centering/form work and curing complete, excluding the cost of reinforcement complete, as per HPPWD specifications approved drawing, design or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, GST, toll tax, sale tax or any taxes imposed by the Government.

Providing and laying reinforced cement concrete of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square millimeter) with cement contents not less than 320 kg (Three hundred twenty Kilogrammes) per cubic metres mechanically mixed and vibrated including curing complete to give an even smooth surface including centering and shuttering etc. but excluding cost of reinforcement as in mouldings as in cornices windows sills etcetra not exceeding 15cm (Fifteen centimeter) in girth above Plinth level to all floorl levels. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions enire satisfaction of Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement isto four sand) and curing complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (un coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) and curing complete as per HPPWD specifications, as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Stone filling dry hand packed tightly, under floors, behind retaining wall/filter chamber complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing anodized aluminium work No.14081 of Jindal/Hindalco for door and window ventilators and partitions wall frames extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodized transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/neroprene felt etcetra Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws all complete as per architectural drawings, specifications, design and the direction of Engineer-in-Charge . The rate is inclusive for carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing anodized aluminium work of Jindal/Hindalco for door, window and ventilator shutters extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodized transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/neoprene felt etcetra Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angl;e, aluminium snap beading for glazing/paneling C.P. brass/ stainless steel screws. all complete including carriage of material within all leads, lifts and other incidentals as per architectural drawings design, specifications and the direction of Engineer-in-Charge including providing and fixing hinges/pivots and making provisions for fixing of fittings whereever required including the cost of PVC/neoprene gaskets as required and glazing/paneling shall be paid for separately) (filling glazed/panelling shall be paid for separately) . The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel fly wire mesh for aluminium doors, windows and ventilators including all fittings, beading etectra complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 8mm (Eight millimeter) thick aluminium grill anodized powder coated to existing in window/ventilators with 80mmx80mm (Eighty millimeter into Eighty millimeter) panels holes with 25x8mm (Twenty five into Eight millimeter) thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in aluminium channels base frames (Aluminum channels base frames to be measured and paid for separately). as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing to existing door frames 30mm (thirty millimeter) thick factory made RAJ SHR (Code No. 9.120) (Nine decimal one two zero) PVC (Poly Venyl Chloride) paneled door shutters consisting of frame made out of ms tubes of 19 gauge (nineteen millimeter) thickness and size 19x19mm (Nineteen millimeter into nineteen millimter) for styles and 15mm×15mm (Fifteen millimeter into fifteen millimeter) for top and bottom rails, ms frame shall have a coat of steel primer of approved make and manufacture MS frame covered with 5mm (Five millimeter) thick heat moulded PVC (Poly Venyl Chloride) “C” channel of size 30mm (thirty millimeter) thickness 70mm (Seventy millimeter) width out of which 50mm (fifty millimeter) shall be flat and 20mm (Twenty millimeter) shall be tapered in 45 degree angle of either side forming style and 5mm thick, 95mm wide, PVC (Poly Venyl Chloride) sheet out of which 75mm (seventy five millimeter) shall be flat and 20mm (twenty millimeter) shall be tapered in 45 (Forty five) degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen millimeter) wide PVC (Poly Venyl Chloride) sheet out of which 75mm (seventy five millimeter) shall be flat and 20mm (twenty millimeter) shall be tapered on both sides to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm thick, 20mm (twenty millimeter) wide cross PVC (Poly Venyl Chloride) sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both sides PVC (Poly Venyl Chloride) sheet to be fitted in the MS frame welded / sealed to the style and rails, joints mitered and jointed with solvent cement adhesive including fixing of PVC (Poly Venyl Chloride) shutter with existing frame with MS butt hinges 100x50x1.90mm (One hundred into fifty into one decimal nine zero millimeter) size with necessary screws etc complete as per HPPWD specifications or as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government..

Providing and fixing both side prelaminated board bwp phenol bonded exterior/interior grade 12mm (Twelve millimeter) thick water proof of Action Tesa/ Century/Kitlam/Kit Ply/Green Ply ISI marked and approved shade for in fill pannel of alluminium shutters as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimeter) thick water proof commercial board of Centuary/Kit ply/ Alpro ply/Marina (ISI Marked) for shutters including 19mm (Nineteen millimeter) thick shelves and back side of the cupboard shall be 6mm (Six millimeter) thick ply and all cut portion of shutters shall have 6mm/12mm (Six millimeter obligue twelve millimeter) thick hard wood edging. The shutters from outside shall be finished with 1mm (One millimeter) thick lamination of Centuary/Green ply/ Action Tesa of approved shade including fixing of PTMT handles 125mm (One hundred twenty five) shall be provided in wood colour with nickle plated piono hinges with screws etcetra complete as per specifications, approved drawing, design and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimeter) thick glass panels of of modi guard/saint gobain(weight not less than 13.75 kg/ sqm. (thirteen point seven five kilogramme per square meter) for windows, ventilators shutters and partitions etcetra including necessary fitting complete as per HPPWD specifications, approved drawing, design, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 5mm (Five millimeter)) thick glass panels of of modi guard/saint gobain for windows, ventilators, dormar windows shutters and partitions etcetra including necessary fitting complete as per HPPWD specifications, approved drawing, design, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing frosted glass panels 4mm (Four millimeter) thick with shutter and partition etcetra with necessary rubber beading, putty, nails, clips etcetra complete as per approved specifications, drawing, design, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into sixteen millimeter) anodized aluminum sliding door bolts, make of PILOT/Sheel anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimeter) anodized aluminum sliding door bolts, make of PILOT/Sheel anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 200x10mm (two hundred into ten millimeter) anodized aluminum tower bolts (Barrel type) make of pilot/sheel anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 100x10mm (One hundred into ten millimeter) anodized aluminum tower bolts (Barrel type) make of pilot/sheel anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimeter) thick cheema pink granite stone in flooring in single slab on treads of step/risers with uniform nosing/edging as per approved shade and design laid over 20mm (Twenty millimeter) average thick base of cement mortar 1:4 (One cement isto four sand) and ointed with grey cement slurry mixed with pigment with to match the shade of the slab including rubbing and polising, semi/round nosing, moulding complete as per approved drawings, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeter) aluminium handles make of pilot/sheel transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) aluminium handles make of pilot/sheel transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) bright finished brass door stopper with rubber cushion screw etc to suit shutter thickness complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 300x300x25mm (Three hundred into three hundred into Twenty five millimeter) labrador design (rainbow series) tile flooring of NTC of approved shade laid on a bed of 20mm (Twenty millimeter) thick cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of slab/tiles (wherever required) including rubbing , polishing complete as per approved drawings, design and specifications and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 30mm (Thirty millimeter) thick Kota stone slab flooring with 55x55cm (fifty five into fifty five centimeter) on slab of uniform colour with 7.5cm (seven point five centimeter) wide Jaisalmer yellow band as per detail on base of cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete upto all floor level as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x600x10mm (Six hundred into six hundred into ten millimeter) full body matt finished double charged/ultra charged vitrified tiles in flooring, treads of steps and landing etcetra of Restile/ Nitco/Simpolo /Kajaria/ Somany/Johnson/Orient & Bell / AGL on a bed of 12mm (Twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry mixed with pigment to match the shade of tiles as per specifiactions, approved drawing, design up to all floor level and as per direction and entire satisfaction of the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing vitrified tiles 600x600x10mm (Six hundred into six hundred into ten millimeter) double charged/ultra charged vitrified tiles of Restile/ Nitco/Simpolo /Kajaria/ Somany/Johnson/Orient & Bell / AGL of approved shade in flooring, treads of steps and landing etecetra laid over a bed of 12mm (Tweleve millimeter) thick cement mortar 1:3 (one cement isto three sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as per specifiactions, approved drawing, design up to all floor level and as per direction and entire satisfaction of the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 300x300x25mm (three hundred into three hundred into twenty five millimeter) thick precast tiles automatic hydraulically compressed ISI marked number IS-1237 of NTC tiles in 50% (fifty percent) white and 50% (fifty percent) grey cement with the ratio of chips shall be 55% (fifty five percent) white chips, 15% (fifteen percent) each maroon, yellow and dark green having chips sizes 0, B, 2 B laid in floor, treads of steps and landing on a bed of 25mm (twenty five millimeter) average thickness of cement mortar 1:6 (one cement isto six sand) and jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polising complete upto all floor level as per HPPWD specification, approved drawing, design and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 10mm ( ten millimeter) thick spartic anti skid ceramic tiles of premium quality of Restile/Kajaria/Nitco/Simpolo/Somany/Johnson/Orient & Bell / AGL of 300x300mm size (three hundred into three hundred millimeter size) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required up to all floor level, complete as per approved specifications, design, drawing and as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing ceramic glazed tiles cladding 300x600mm (Three hundred into six hundred millimetre) of Restile/ Nitco/Simpolo /Kajaria/ Somany/Johnson/Orient & Bell / AGL upto 120cm (One hundred twenty centimeter) height in approved colour of required shade with cement mortar 1:3 (one cement isto three sand) laid over and jointed with cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as per specifiactions, approved drawing, design up to all floor level and as per direction and entire satisfaction of the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing ceramic glazed tiles cladding 300x450mm (Three hundred into four hundred fifty millimeter) of Restile/ Nitco/Simpolo /Kajaria/ Somany/Johnson/Orient & Bell / AGL upto 120cm (One hundred twenty centimeter) height skirting of approved shade with cement mortar 1:3 (one cement isto three sand) laid over and jointed with cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as per specifiactions, approved drawing, design up to all floor level and as per direction and entire satisfaction of the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 50mm (Fifty millimeter) thick cement concrete flooring 1:2:4 (one cement is to two sand is to four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) laid in one layer finished with a floating coat of neat cement and curing complete up to all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 6mm thick ceramic glazed tiles 300x450mm (Three hundred into four hundred fifty millimeter) in dado of Restile/ Nitco/Simpolo /Kajaria/ Somany/Johnson/Orient & Bell / AGL of approved shade with cement mortar 1:3 (one cement isto three sand) laid over and jointed with cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as per specifiactions, approved drawing, design up to all floor level and as per direction and entire satisfaction of the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete inter locking paver block 60mm thick with vibration technology in NTC/PVC/Fibre moulds upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub base of concrete with 25mm (Twenty five millimeter) on average thickness of cement mortar 1:4 (One cement isto four sand) laid over and jointed with pigment to match the shade of block and curing rubbing and polishing complete as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimeter) thick unistone cladding on faces of masonry walls etc. on 12mm (Twelve millimeter) thick cement plaster 1:3 (one cement isto three sand) and jointed with cement slurry including scaffolding etc. complete upto all floor level as per HPPWD specifications or as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing plinth protection 60mm (Sixty millimeter) thick interlocking paver block with 23cm (Twenty three centimeter) dia half round stone ware pipe for drainage purpose fixed over cement concrete 1:5:10 (One cement isto five sand isto ten graded crushed stone aggregate 40mm (Forty millimeter) nominal size) complete as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit fast Flex to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm (Three hundred millimeter) vertically. The second coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimeter) per 50Kg (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky.complete as per approved drawing, design including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing of 50mm (Fifty millimeter) diameter SST (Stainless steel) pipe hand rail fixed with in combination of 35mm (Thirty five millimeter) diameter and 15/20 (Fifteen obligue twenty millimeter) SST (Stainless steel) pipe of three row between step and railing in equal space and jointed with electric gas welding at top along with 50mm (Fifty millimeter) diameter hand rail jointing in steps as per specification, approved drawing, design and as per direction and entire satisfaction of Engineer-in-Cherge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel grab Bar with necessary nuts and bolts etcetra complete in all respect as per approved drawings, design and specifications and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing in position concealed Everest wall frame secion for external wall/ceiling using Everest design fibre board ceiling tiles of size 600mmx600mm (six hundred millimeter into six hundred millimeter) and 25mm (Twenty five millimeter) thick over ready made power coated metal sheet section everest stud having web of 51mm (Fifty one millimeter) and two flanges of 40/42 (Forty oblique forty two) millimeter placed at 600mm (six hundred millimeter) centre to centre vertically and track having 2 (Two) angles flange of 32mm (Thirty two millimeter) with thickness of 0.55mm (Zero point fifty five millimeter) everest cement plank fixed to the everest stud with 25mm (twenty five millimeter) self drilling , self taping and web 51mm (Fifty one millimeter) everest track to fixed on existing floor and ceiling with nylon sleeves and fully threaded steel screw at the rate 600mm (Six hundred millimeter centre to centre counter sunk everest fiber cement screw at he rate 200mm (Two hundred millimeter centre to centre planks are overlapped by 25mm (Twenty five millimeter) as per approved design, drawing and specification and as per direction and entire satisfaction of the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing prepainted (ISI marked -Z 120) of tata /sail/ Reliance/zindal steel sheet roofing over all steel trusses providing and fixing Kolar metal or EQUIV prepainted single skin trapazodial profile sheething 0.60mm (Zero point sixty millimeter) thick having (1060 mm (One thousand sixty millimeter) cover with overall width 1126mm (One thousand one hundred twenty six millimeter) 28mm (Twenty eight millimeter) crost depth at 353 I 2 c/c crost distance there will be two ribs at the centre or stiffning having depth of 25 mm at the lower 81 mm base metal of cold rolled steel coil with zink coating top coat with regular modified polyster coating of 20 (Twenty) micron over 5 (Five) micron primer coating to back coat of palyster of 5 (Five) micron over 5 (Five) micron primer approved shade and Balancing reverse coat with polyster paint fixing of sheet shall be with self drilling and selp tapping screws, of size 5.5 mm dia 75.5 mm length with EDPM seal. The material supply will be accompained by test certificate and against corrosion/ Fading of colour and manufacturing defects.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing prepainted steel sheet (ISI marked -Z 120) of tata / sail /Reliance/zindal steel sheet valleys 0.60mm (Zero point sixty millimeter) thick kolar metal or EQUIV prepainted single skin to metal of cold rolled steel coil with zink coating top coat with regular modified polyster coating of approved shade and Balancing reverse coat with polyster paint fixing of sheet shall be with self drilling and selp tapping screws, of size 5.5 mm dia 75.5 mm length with EDPM seal .The material supply will be accompained by test certificate and against corrosion/ Fading of colour and manufacturing defects. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing prepainted (ISI marked -Z 120) of tata /sail/Reliance/ zindal steel sheet ridges Kolar metal 0.60mm (Zero point sixty millimeter) thick kolar metal or EQUIV prepainted single skin to metal of cold rolled steel coil with zink coating top coat with regular modified polyster coating of 20 (Twenty) micron over 5 (Five) micron primer coating to back coat of palyster of 5 (Five) micron over 5 (Five) micron primer approved shade and Balancing reverse coat with polyster paint fixing of sheet shall be with self drilling and self tapping screws, of size 5.5 mm dia 75.5 mm length with EDPM seal .The material supply will be accompained by test certificate and against corrosion/ Fading of colour and manufacturing defects.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing flushing 38cm (thirty eight centimtre) over all with Kolar metal 0.60mm (Zero point sixty millimeter) thick kolar metal or EQUIV prepainted single skin to metal of cold rolled steel coil with zink coating top coat with regular modified polyster coating of 20 (Twenty) micron over 5 (Five) micron primer coating to back coat of palyster of 5 (Five) micron over 5 (Five) micron primer approved shade and Balancing reverse coat with polyster paint fixing of sheet shall be with prepainted iron J of L hooks, bolts and nuts 6mm (six millimtre) diameter and prepainted GI limpet and bitumen washers complete as per approved design, drawing and HPPWD specifications and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 300mm (Three hundred millimeter) wide 250mm (Two hundred fifty millimtre) deep (clear) with 0.63mm (Zero point sixty three millimeter) thick plain G.I. tata /sail /Reliance/ zindal sheet gutter with iron brackets 40x3mm(Forty into three millimeter) size bolts and nuts and washers etcetra including making necessary conections with rain water pipe complete as per design. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150 mm (one hundre fifty millimeter) diameter P.V.C. (Poly venyl chloride) (D-plast ) ISI marked Finolex / Relpipe (reliance)/ vectus provision for purpose rain water disposal on walls face Rain water pipes working pressure not less than 4/6kg/sq cm (four obligue six kilogram per square centimeter) for rain water pipes fixed with approved adhesive including filling the joints complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face 100mm (Hundred millimeter) diameter P.V.C (Poly venyl chloride) (D-plast) Plain bend ISI marked Finolex / Relpipe (reliance)/ vectus provision for purpose rain water disposal accessories for Rain water pipes with approved adhesive i/c filling the joints complete complete.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government

Providing and fixing 75mm (Seventy five millimeter) diameter, mild steel Holder Bat clamps of approved design to P.V.C (Poly venyl chloride) (D-plast) pipe embedded in cement concrete blocks 10x10x20cm (ten into ten into twenty centimeter) of 1:2:4 Mix (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) including cost of cutting holes and making good the walls complete as per HPPWD specifications or as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. black plain sheet 1.66mm to 2.00mm (one point sixty six millimeter to two point zero zero millimeter) thick in facia/eaves boards/soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per HPPWD specifications and as direction by the Engineer-in-Charge, (base members of steel work shell be measured and paid for separately), including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Steel work of TATA/SAIL/TISCO welded in built up sections trusses and framed work in trusses and trussed purlins, including cutting, lifting, hoisting and fixing/placing in position complete and applying a priming coat of red lead paint complete In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like as per HPPWD specifications and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20 x10x2.5mm (Twenty into ten into two point five millimeter) and braced with flat iron diagonals 20x5mm (Tweny into five millimeter) size with top and bottom rails of T.iron 40x40x6mm (Forty into forty into six millimeter) with 38mm (Thirty eight millimeter) dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint as per approved specifications, design, drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing angle iron cup board frame manufactured from M.S. angle iron section 25mmx25mmx5mm ( twenty five millimeter into twenty five millimeter into five millimeter) thickness including hinges- jambs, lock jamb , beed and if required angle thrashold of mild steel angle 25mm x 25mm( twenty five millimeter into twenty five millimeter) welded rigidly fixed by mechanical means, lugs with split ends tails to each jamb including steel butt hinges 2.5mm ( two decimal five millimeter) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre-treatment of the surface as per approved specifications, design, drawing, as directed by Engineer-in-Charge including carriage of materials within all leads , lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Applying two or more coats of Birla White wall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final finish to the surface complete upto all floor level as per approved specifications, design, drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on fair side of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved specifications, design, drawing and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of approved brand and manufacture of Narolac/Asian paints other than white and of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications and as per direction and entire satisfaction of the including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture of Narolac/Asian paints complete as per HPPWD specifications and as per direction and entire satisfaction of the including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint other than white of approved brand and manufacture of Narolac/Asian and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

White washing with lime on undecorated wall surfaces (two or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate including Sales tax, Toll tax or any other taxes imposed by the Government

Finishing wall with weather proof exterior grade emulsion paint of Asian /Nerolac /Berger /Dulex /Apex/Ultima manufacture brand of required and approved shade on undecorated wall surfaces (two or more coats) to give an even after throughly brushing the surface to remove all dirt and remains of loose powdered material incluing applying of putty as required for making the surface complete as per HPPWD specifications and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Wall painting (two or more coats) with acrylic washable emulsion paint of Asian/Nerolac/Berger/Dulex /Apex/Ultima manufacture brand of required and approved shade for interior grade on undecorated concrete/stone /plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for metlling the surface complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Wall painting with Epoxy resin of Pidilite (two or more coats) with premium emulsion paint of approved brand and manufacture of approved shade for interior grade on undecorated concrete/stone /plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for metlling the surface complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Wall painting (two or more coats) with acrylic washable emulsion paint of Asian/Nerolac/Berger/Dulex /Apex/Ultima manufacture brand of required and approved shade for interior grade on undecorated concrete/stone /plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for metlling the surface complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and lying in trenches ISI marked 40mm (Forty millimeter) nominal bore galvanized mild steel tubes (Medium grade) tube fittings of approved brand and manufacture (TATA/ JINDAL MAKE) complete (earth work in trenches to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 40mm (Forty millimeter) nominal bore galvanized mild steel tubes (Medium Grade) of approved brand and manufacture (TATA/ JINDAL MAKE) complete tube fittings and clamp including making good the wall , celing and floor carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST. malkana and any other taxes imposed by the Government.

Making connection of galvanised steel distribution branch with galvanised steel mail 20mm to 40 mm (twenty to forty millimeter) nominal bore by providing and fixing tee including cutting and threading the pipe complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet squatting pan Orissa W.C. Pan seat No.20090 (S-10) (Twenty thousand ninety) of size 53x41cm (Fifty three into forty one centimeter) with white shade of Hindware/Jaquar/Cera/ Star white/Snow white shade (earth work, bed concrete, foot rest and trap to be measured and paid for separately), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixng Vitreous china wash down water closet European type W.C. Pan EWC of Star.No.20087 (Twenty thousand eighty seven) (S-10) (S-Ten) of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimeter) with pre cistern and fixed with jet pressure complete of Hindware/Jaquar/Cera /Star white/Snow white shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One Cement isto One Sand) (Earth work and bed concrete to be measured and paid for separately) as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixng Vitreous china wash down water closet (European type W.C. Pan) of matrix No. 20087 (Twenty thousand eighty seven) (S-10) (S-Ten) of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimeter) of Hindware/Jaquar/Cera of Star white/Snow white shade and its equivalent with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One Cement isto One Sand) (Earth work and bed concrete to be measured and paid for separately) as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing G.I./PVC Inlet connection for flush pipe with W.C. Pan complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing plastic seat (solid type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers Solid type white plastic seat and cover, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china flat back bowl pattern urinal No. 60002 (Sixty thousand two) of Hindware /Cera/ Jaquar /star white including connection the urinal with waste pipe by means of white lead mixed with chopped hemp size 390x375x590mm (Three hundred ninety into three hundred seventy five into five hundred ninety millimeter) complete as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china squatting plate pattern urinal of Hindware /Cera/ Jaquar /star white of size 450x350mm (Four hundred fifty millimeter into three hundred fifty millimeter) with integral longtitudinal flush pipe, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 10.00 Ltrs (Ten ltres) capacity P.V.C. (Poly Venyl Chloride) low level flushing cistern I.S. (Indian Standard) marked No. 2603 of Hindware /Cera/ Jaquar star white with a pair of M.S. (mild steel) brackets, with fittings such as lead valve less siphon, 15mm (Fifteen millimeter) nominal size brass ball valve with polythene float, C.P. (Chromium Plated) brass handle unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia (Forty millimeter) diameter C.P. (Chromium Plated) flush bend including cutting holes in walls and making good the same and connection the flush bend with cistern and closet (overflow pipe to be measured and paid for separately), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing viterous china wash basin of Hindware/Cera Delta No. 10008 of size 550x400mm (Five hundred fifty into four hundred millimeter) of snow white shade with single hole for pillar tap with GI or MS bracket painted with white color etcetra complete as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing viterous china wash basin of Hindware/Cera Delta No. 10010 of size 550x400mm (Five hundred fifty into four hundred millimeter) of snow white shade with single hole for pillar tap with GI or MS bracket painted with white color etcetra complete as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing viterous china matrix wash basin of Hindware/Cera Delta No. 10010 of size 550x400mm (Five hundred fifty into four hundred millimeter) with single hole for pillar tap with GI or MS bracket painted with white color etcetra complete as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china pedestal of Hindware/Cera/Jaguar I.S marked for wash basin complete recessed at the back for the reception of pipes and fittings complete upto all floor level as per HPPWD specification and as direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimeter) diameter rubber plug for wash basin ISI marked No. 8931 7893 complete including fittings and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) nominal diameter CP brass waste pipe for wash basin or sink including brass check nut complete of continental series of Jaquar/Classic series of Hindware/Floral series of Cera as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on 6mm (Six millimeter) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china 600x450x250mm (Six hundred into four hundred fifty into two hundred fifty millimeter) labortary sink of ISI mark of approved brand of Hindware/Jaquar/Cera/ Star white/Snow white shade shade including cutting holes in wall and making good the same as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax or any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into twenty millimeter) C.P. (chromium plated) brass towel rail manufacture of continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into one hundred twenty millimeter) glass shelf with C.P brass bracket and guard rail of continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete fixed to wooden plugs with C.P brass screws as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing chromium plated brass toilet paper holder of approved brand and manufacture of continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete as per HPPWD specifications, approved drawing or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish of approved brand and manufacture of continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per HPPWD specifications, approved design, drawing, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including GST, Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen millimeter) diameter C.P. (Chromium Plated) Brass Bib tap No. 12 (Twelve) with capstan head manufacture of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen millimeter) diameter C.P. (Chromium Plated) Brass pillar tap with capstan head of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen millimeter) diameter C.P. (Chromium Plated) angle valve of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeter) mixer for kitchen sink with top / bottom swinging spout of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Mixer for kitchen sink with casted swinging spout at top of of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeter) nominal bore CP (Chromium plated) connection pipe with brass unions of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera complete as per HPPWD specifications and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. (Chromium Plated) brass full way valve with wheel of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera 20 mm (twenty millimeter) nominal bore as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimeter) nominal bore High pressure with polythene plastic floats brass ball valve (horizontal plunger type) as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimeter) nominal bore ferrule including boring and taping the main as per specification, approved drawing, design, as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing G.I./M.I Union 20mm (Twenty millimeter) sizes (where not included in the items) complete as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing G.I./M.I Union 40mm (Forty millimeter) sizes (where not included in the items) complete as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimeter) nominal bore/diameter 1620 (One thousand six hundred twenty) polythene aluminium polythene (P.E A.L.P.E.) composite pressure pipe U.V. stabilized with carbon plastic confirming to IS 15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) of kitce for water supply including clamps at one metres spacing cutting fixing and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed on wall, including filling the joints with approved adhesive complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimeter) nominal bore/diameter 2025 (Two thousand twenty five) polythene aluminium polythene (P.E A.L.P.E.) composite pressure pipe U.V. stabilized with carbon plastic confirming to IS 15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) of kitce for water supply including clamps at one metres spacing cutting fixing and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed on wall, including filling the joints with approved adhesive complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing composite end seal compression pressure fitting as per IS 15450-2004 for cold water supply equal tees 1620 (One thousand six hindred twenty) with jointing testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing composite end seal compression pressure fitting as per IS 15450-2004 for cold water supply reducing tees 1620xall branches (One thousand six hundred twenty into all branches) with jointing testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing composite end seal compression pressure fitting as per IS 15450-2004 for cold water supply female branch tee 1620x1620x20mm (One thousand six hundred twenty into One thousand six hundred twenty in to twenty millimeter) with jointing testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing composite end seal compression pressure fitting as per IS 15450-2004 for cold water supply female elbow 1620x20mm (One thousand six hundred twenty into twenty millimeter) with jointing testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing composite end seal compression pressure fitting as per IS 15450-2004 for cold water supply male thread connector 1620x20mm (One thousand six hundred twenty into twenty millimeter) with jointing testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing composite end seal compression pressure fitting as per IS 15450-2004 for cold water supply female thread connector 1620x20mm (One thousand six hundred twenty into twenty millimeter) with jointing testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing composite end seal compression pressure fitting as per IS 15450-2004 for cold water supply coupler 1620 (One thousand six hundred twenty) with jointing testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing composite end seal compression pressure fitting as per IS 15450-2004 for cold water supply reducer 1620x1216 (One thousand six hundred twenty into one thousand two hundred sixteen) with jointing testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and placing three layered PVC (Poly Venyl Chloride) water storage tank ISI marked 12701 Sintex or its equivalent make and of having capacity 1000 ltr. (One thousand liters) tank complete in all respects, with necessary fittings including over flow pipe ball valve, scour pipe, with polythene float valve, PVC cover with locking arrangement including proving pads of sizes as required for inlet and outlet complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC (Polyvinyl chloride) floor trap of Supreme/Finolex / Relpipe (reliance)/ vectus self cleaning design including fixing with approved adhesive, cost of cutting making good the wall complete 110X90 mm ( one hundred ten into Ninety millimeter) as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimeter) diameter high pressure P.V.C. (Poly vinyl chloride) spigot and socket soil, waste and ventilating pipes ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per directions and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimeter) diameter high pressure P.V.C. (Poly vinyl chloride) spigot and socket soil, waste and ventilating pipes ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per directions and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimeter) diameter PVC (Polyvinyl chloride) (D-Plast) single equal branch with oval access door ISI marked make of Supreme/finolex / Relpipe (reliance)/ vectus with insertion rubber washer, 3mm (Three millimeter) thick bolts and nuts, including testing of pipes and joints complete as per approved specifications, drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (Two hundred ten millimeter) diameter PVC (Polyvinyl chloride) (D-Plast) single equal branch with oval access door ISI marked make of Supreme/finolex / Relpipe (reliance)/ vectus with insertion rubber washer, 3mm (Three millimeter) thick bolts and nuts, including testing of pipes and joints complete as per approved specifications, design, drawing, as per the directions and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (Two hundred thirty millimeter) diameter PVC (Polyvinyl chloride) door bend with oval access door ISI marked make of Supreme/finolex / Relpipe (reliance)/ vectus with insertion rubber washer, 3mm (three millimeter) thick bolts and nuts, including testing of pipes and joints complete as per approved specification, design, drawing, as per the directions and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimeter) diameter PVC (Polyvinyl chloride) door bend with oval access door ISI marked make of Supreme/finolex / Relpipe (reliance)/ vectus with insertion rubber washer, 3mm (three millimeter) thick bolts and nuts, including testing of pipes and joints complete as per specification, approved design, drawing, as per the direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimeter) diameter P.V.C (Polyvinyl chloride) plain single equal branch ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimeter) diameter. P.V.C (Polyvinyl chloride) plain single equal branch ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing P.V.C. (Polyvinyl chloride) (D-Plast) fittings and accessories P.V.C. (Polyvinyl chloride) collars 150mm (one hundred fifty millimeter) diameter ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing P.V.C. (Polyvinyl chloride) (D-Plast) fittings and accessories P.V.C. (Polyvinyl chloride) collars 110mm (one hundred ten millimeter) diameter ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face 150mm (One Hundred fifty millimeter) diameter P.V.C (Poly venyl chloride) Plain bend ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face 150mm (One Hundred fifty millimeter) diameter P.V.C (Poly venyl chloride) Plain bend ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face 150mm (One Hundred fifty millimeter) diameter P.V.C (Poly venyl chloride) offset 45° (Forty five degree) ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face 110mm (One Hundred ten millimeter) diameter P.V.C (Poly venyl chloride) offset 45° (Forty five degree) ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimeter) diameter P.V.C (Polyvinyl chloride) double equal branch with oval access door ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus with insertion rubber washer, 3mm (Three millimeter) thick bolts complete including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimeter) diameter P.V.C (Polyvinyl chloride) double equal branch with oval access door ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus with insertion rubber washer, 3mm (Three millimeter) thick bolts complete including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimeter) dia. P.V.C (Polyvinyl chloride) clamps ISI marked make of Supreme/finolex / Relpipe (reliance) / vectus of approved design with steel screws and rawal plugs etcetra complete as per approved drawing, design and specifications, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimeter) dia. P.V.C (Polyvinyl chloride) clamps ISI marked make of Supreme/finolex / Relpipe (reliance) / vectus of approved design with steel screws and rawal plugs etcetra complete as per approved drawing, design and specifications, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimeter) diameter P.V.C (Polyvinyl chloride) 'P' or 'S' trap for water closet (squatting pan) ISI marked make of Supreme/finolex / Relpipe (reliance) / vectus including jointing the trap with pan and soil pipe with approved adhesive as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Dora size 610x510x200mm (Six hundred ten into five hundred ten into two hundred millimeter) KC-1004 (One thousand four) ISI marked make of Cera or its equvalent stainless steel kitchen sink with drain board and chromium plated waste pipe, cast iron or mild steel brackets painted white including cutting holes and making good the same complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 10.00 Ltrs (Ten ltres) capacity P.V.C. (Poly Venyl Chloride) low level flushing cistern I.S. (Indian Standard) marked No. 2603 of Hindware /Cera/ Jaquar star white with a pair of M.S. (mild steel) brackets, with fittings such as lead valve less siphon, 15mm (Fifteen millimeter) nominal size brass ball valve with polythene float, C.P. (Chromium Plated) brass handle unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia (Forty millimeter) diameter C.P. (Chromium Plated) flush bend including cutting holes in walls and making good the same and connection the flush bend with cistern and closet (overflow pipe to be measured and paid for separately), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked, 100mm (One hundred millimeter) dia. C.P grating manufacture continental series of Jaquar/Classic series of Hindware/Floral series of Cera for gully, floor or Nahni trap complete as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size bedding for stoneware pipes of internal diameter 150mm (One hundred fifty millimeter) including necessary form work and curing complete as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size bedding for stoneware pipes of internal diameter 100mm (One hundred millimeter) including necessary form work and curing complete as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC (reinforced cementconcrete) top slab in 1:2:4 mix (One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size), foundation concrete 1:4:8 (One Cement: Four Sand: eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size, inside plastering 15mm (Fifteen millimeter) thick with cement mortar 1:3 (One Cement: Three Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ((One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size) finished smooth complete including curing and testing Inside size 800mmx800mm (Eight hundred millimeter into Eight hundred millimeter) and 500mm (Five hundred millimeter) deep including C.I. (Cast Iron) cover with frame, (Light duty single seal pattern –I) 455mmx610mm (Four hundred fifty five into Six hundred ten millimeter) internal dimensions total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15kg (Ffteen kilogram) with 200mm (Two hundred millimeter) thick walls of brick using comman burnt clay building bricks in cement mortar 1:3 (One Cement: Three Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC (reinforced cement concrete) top slab in 1:2:4 mix (One Cement isto Two Sand isto Four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size, foundation concrete 1:4:8 (One Cement isto Four Sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size, inside plastering 15mm (Fifteen millimeter) thick with cement mortar 1:3 (One Cement isto Three Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ((One Cement isto Two Sand isto Four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size finished smooth complete including curing and testing Inside size 800mmx800mm (Eight hundred millimeter into Eight hundred millimeter) and 1000mm (One thousand millimeter) deep including C.I. (Cast Iron) cover with frame, (Light duty single seal pattern –I) 455mmx610mm (Four hundred fifty five millimeter into Six hundred ten millimeter) internal dimensions total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15kg (Ffteen kilogram) with with 200mm (Two hundred millimeter) thick walls of brick using comman burnt clay building bricks in cement mortar 1:3 (One Cement: Three Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Kumar Associates