Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹56.4 L
EMD Value
₹57,000
Closing Date
23 Nov 2026, 12:05 pmDue today
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer (R & B) Division, Bharuch
Addition And Alteration to Court Building at Bharuch. (Providing Front Office, Video Conference Room and Mediation Centre at Ground Floor)
364136
22 Of 2026-27
Open
Civil Works - Others
Works
Bharuch
1 document required · 1 mandatory
₹2,400
Executive Engineer, Bharuch (R&B) Division, Bharuch
₹57,000
7 Nov 2026
7 Nov 2026
7 Nov 2026
23 Nov 2026
7 Nov 2026
90 days
No figures
1 Demolition of Brick work and stone masonry including 18.00 Nos 356.33
stacking of serviceable materilas and disposal of
unserviceable materials with all lead and lift.(ii) In
Cement Mortar.
2 Dismentaling tiled of stone floors laid in mortar including 111.00 Smt 46.77
stacking of serviceable materilas and disposal of
unserviceable materials with all lead and lift.
3 Removing and scraping of old deteriorated plaster of any 70.00 Nos 18.94
thickness fromm wall / R.C.C member including stacking
of serviceable material and disposal of unserviceable
from site of work with all lead and lift
4 Dismentling doors, windows, ventilators etc. (wood or 5.00 Nos 182.94
steel) shutters including chowkhats architraves, holdfasts
and other attachment etc. complete and stacking them
within all lead and lift.(i) Not exceeding 3 Sq.M. in area.
5 Dismantling santtary fittings like wash basin . W.C. pan 6.00 Nos 394.51
Indian and European type, flushing tank etc. including
stacking the materials with all lead and lift.
6 Half brick masonry in common brunt clay building bricks 260.00 Nos 599.84
having crushing strength not less than 35 Kg/Sq.Cm. in
Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in
foundation and plinth (B) Conventional
7 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 498.00 Smt 1415.77
mm (average) base of cement mortar 1:6 ( 1 cement:
coarse sand) on new surface or fixing on existing flooring
by adhesive material including dismentaling of existing
flooring and jointed with color cement slurry including
finised with flush pointing & cleaning the surface etc.
complete for light shade
8 Providing and fixing Alluminium Glass door with using 51.00 Smt 3663.27
Alluminium Twin Section on both top and bottom sides
with 12 mm thick Acid Frosted Glass in beteen two twin
sections with S.S. matt finish 10" handles and heavy floor
springs with necessary fixtures and fastening incl. of all
alluminium section to be powder coated etc. complete or
as directed.
Item Rate In
Description of Item Quantity Unit Amount
No figures
9 Providing and Fixing Machine cut, free edges, pre mirror 25.00 Smt 1607.92
polished green marble stone slab 18 to 20 mm thick
(single piece not more than 150 cm ) for Doors/Windows
Cill and Jambs cladding as per design including full
molded round front edge and 1 cm nosing and laid on
mm thick cement mortar 1:6 ( 1 cement:6 coarse sand)
jointed with grey cement slurry including rubbing and
polishing finishing etc complete.
10 Providing and fixing window having extruded aluminum 26.00 Smt 1583.95
Colour anodized section frame main outer size 95mm x
24mm x 1.17mm (of Jindal Section no:2459 @ wt.of
0.738 Kg/mt), horizontal Three track member size
92mm x 31.75mm x 1.30mm (of Jindal Section
no:8688,@ Wt.1.07 Kg/mt), vertical member of size
92mm x 31.75mm x 1.50mm (of Jindal Section
no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of
horizontal member size 40 mmx18mm x1.29mm (of
Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical
member of size 40mm x 18mm x 1.29 mm (of Jindal
Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick
transparent bronze colour tinted float glass with powder
coated aluminum fittings and fixtures and transparent
silicon sealant glass fixing to frame as per details etc
11 Providing and fixing standared extruded of alluminium 2.00 Smt 1175.56
section of size 63mm x 38.10mm x 1.2mm (Jindal Section
:2434, @ Wt. 0.643 Kg/mt) with colour anodized
alluminium frame for ventilation with 5 mm thick frosted
glass as details etc complete for Ventilation.
12 Providing and laying white glazed tiles 6mm thick in 118.00 Smt 916.27
flooring treads of steps and landing laid on a bed of
12mm thick cement mortar 1:3 (1-cement : 3-coarse
sand ) finishing with flush pointing in white cement.
13 Providing and laying glazed tiles 6mm thick in skrting 123.00 Smt 946.50
risers of steps and dedo on 10mm thick cement plaster
1:3 (1-cement : 3-coarse sand) and jointed with white
cement slurry.
14 Providing and fixing washbasin with single hole for pillar 3.00 Nos 1529.03
tap with C.I. or M.S. brackets painted white including
sutting holes and making good the same but excluding
fittings.(A) Vitreous China:(ii) Flat Back washbasin
mm x v 400mm size. (i) In white colour with C.P. brass
waste for washbasin or sink. (A) 32mmdia and M.I.
fisher union for washbasin or sink. (A) 32mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
15 Providing and fixing wsh down water closet (European 9.00 Nos 1303.71
type, W.C. Pan) with integral P or S trap including
jointing the trap with soil pipe in Cement Mortar 1:1 (1-
Cement : 1-fine sand) (Seal and cover to be measured
and paid for separately)(A) vitreous China Pattern :(i) in
white colour
16 Providing and fixing G.I. inlet connection for flush pipe 3.00 Nos 38.81
with W.C. Pan
17 Providing and fixing plastic seat and cover for wash 3.00 Nos 291.33
down water closer with C.P. brass hinges and rubber
buffers. (B) Black plastic seal and cover.
18 Providing and fixing 600mm x 450mm bevelled edge 4.00 Nos 833.74
mirrror of superior glass mounted on 6mm thick A.C.
sheet or plywood sheet and fixing to wooden pluge with
C.P. brass screws and washers.
19 Providing and fixing C.P. brass towel rail comlete with 5.00 Nos 603.19
C.P. brass brackets fixed to wooden plugs with C.P. brass
scews.(B) 600mm x 20mm size.
20 Providing and fixing screw down bib taps of following 20.00 Nos 214.81
size.(B) Brass chromium plated screws down Bib Tap. (ii)
21 Providing and fixing Urinal of approved quality including 5.00 Nos 1557.35
connection with trap and with integral longitudinal flush
pipe.(A) Squating plate pattern white earthenware
22 Providing and fixing chromium plated brass half trun 5.00 Nos 275.76
flush cock of approved quality including fixing in pipe
line etc. complete.(iii) 32mm dia.
23 Providing and fixing concealed center point to wall 99.00 Rmt 166.86
ceiling & floor CPVC (SDR 13.5) PIPE having National
Sanitation Foundation (NSF) seal for potable water of
following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc.
complete.[A] 15 mm.
24 Providing and fixing concealed center point to wall 110.00 Rmt 249.72
ceiling & floor CPVC (SDR 13.5) PIPE having National
Sanitation Foundation (NSF) seal for potable water of
following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc.
complete. [C] 25 mm.
25 Providing and fixing concealed center point to wall 122.00 Rmt 442.04
ceiling & floor CPVC (SDR 13.5) PIPE having National
Sanitation Foundation (NSF) seal for potable water of
following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc.
complete. [E] 40mm.
26 Providing and fixing PVC SWR Nahni trap IS 14735 for 24.00 Nos 558.36
drain - 100 mm diameter with jali of the following
nominal diameter of self cleansing design with C.I scread
down or hinged grating including the cost of cutting and
making good the walls.
Item Rate In
Description of Item Quantity Unit Amount
No figures
27 Providing and fixing to wall ceiling and floor 10.0 Kg. 125.00 Rmt 336.24
F/Cm2 working pressure poluthene pipes of the
following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall clipsetc.
including making good the wall ceiling and floor.(G)110
28 Providing and fixing FRP frame size 100 x 50 mm and 28 22.56 Smt 2377.76
mm thick FRP depress panel shutter having extra
reinforcement on sides and edges and in Gel coat finish.
The core of the shutter is to be filled up with injected fire
retardant grade polyurethance foam done in situ along
with embedded wooden pieces for stiffening and also for
taking hinges and fixtures. The whole FRP Frame and
shutter is to be water proof, weather proof, termite proof
and resistance to mild acid / Alkali. Rates are to be
inclusive of S.S. hinges with necessary screws and
altuminium fixtures and fastening.
29 Providing & Fixing Colour anodized Alluminium Partition 338.00 Smt 1878.60
PARTLY PANNELED,PARTLY GLAZED using alluminum
section of Frame size 63.50x38.10x1.95 mm (of jindal
Section no.4605 @ Wt.1.094 Kg/Rmt) Partly Glazed
5mmt thick Modi Guard and Partly Fixed with 12mm
thick exterior grade both side prelaminated sheet
including rubber gasket and beading clips for Glazing/
panneling and cleat angle,with expansion hold fasteners
including necessary filling up of gaps at Junction
including all required materials labour and equipment as
per detailed drawing As Directed by Engineer in Charge.
30 Wall painting (three coats) with plastic emulsion paint of 1676.00 Smt 119.42
approved brand and manufacture on wall surfaces to
give an even shade including thoroughly brushing the
surface free from mortar droppings and other foreign
matter and also including Birla or Asain Lappy Putty etc.
31 Providing & Supplying Wooden Three Seated SOFA made 16.00 Nos 13796.60
using Indian Teak wood in framing and support of 19mm
thick WP plywood, box of the sofa made with 100mm
Thick High Density 'U' foam in seat and 50mm Thick High
Density 'U' foam in back rest portion with imported
POLYTEEL recron covering on back portion with
textured TAPESTRY black Leather covering and S.S. legs
with necessary fixtures & fastening etc., competed as per
sample approved & as directed by the Engineer in
Item Rate In
Description of Item Quantity Unit Amount
No figures
32 Providing and Supplying Wooden Wardrobe cum 2.00 Nos 6143.83
Dressing Unit having size of 2513 (L) X 533 (D) X
(H) made up using BWP plywood with both side 1.0 mm
laminate as per detail drawing with all necessary
accessories like Saint Gobain Glass, S. S. auto hinges, S. S.
handles, S. S. hanger rod etc. inclusive of all necessary
fixtures & fasteners, PU polishing, etc. complete as per
directed & sample approved as directed by the Engineer
in Charge.
33 Providing & Supplying Steel Storwels (Godrej Make) 13.00 Nos 23735.00
having dimensions - 900 (W) X 507 (D) X 1950 (L) mm
made up of 20 gauge M. S. Steel Section, with 04 Nos.
adjustable shelves, good quality locking system, powder
coated etc. complete as per sample approved and as
directed by the Engineer in Charge.
34 Providing & Supplying Wooden Office Table with 8.00 Nos 10910.02
laminated top having 1520 (L) X 900 (W) X 760 (H) using
18 mm thick BWP plywood & 25mm & 50mm X 12mm
Teakwood patti, formica, handle, fastening & fixture
including cost of all material & Labours with drawer &
shutter, inside one priming coat and two coat of oil
painting. etc. complete as per drawing & sample
approved and as directed by the Engineer in Charge.
35 Providing & Supplying Wooden Executive Table Having 1.00 Nos 14097.58
Size of 1800 (L) X 1000 (W) X 760 (H) mm with
necessary wooden with 8mm glass on laminated top
supports and framing of 18 mm thick century make BWP
plywood or equivalent and 1 mm thickness
Laminate/Veneer with cost of all material & Labours
with inside one primer coat Colour, SS Studs and box
with Three Drawers & necessary fixtures and fastenings.
The work shall be done as per drawing & sample
approved as directed by the Engineer in Charge.
36 Providing and fixing Steel cupboards Shutters in wall 10.00 Nos 2198.77
with steel frames and shutters using 18 gauge M.S. steel
sheet including necessary fixtures , fastening like locking
arrangement for pad lock handles, hinges with approved
shade of spray painting etc complete as directed without
Item Rate In
Description of Item Quantity Unit Amount
No figures
37 Gypsum board ceiling : Supply and fixing seamless 475.00 Sqm 606.95
ceiling with Gypboard of 12.5 mm thick, fixed by using
mm long dry wall screws to the under side of the
suspended G. I. channels grid. comprising of main,
intermediate and perimeter runners, approximate sizes
for the same are 80 x 26 x 0.5 mm @ 450 centre to
centre, 45 x 15 x 0.09 mm @ 1200 centre to centre and
20 x 29 mm respectively. Grid is suspended by G. I. soffit
cleat (37 x 27 x 1.6 mm) using metal expansion fasteners
of 12.5 mm dia, 35 mm deep, 6 mm dia bolt. G. I.
connecting clips and other accessories to comply with I.
S. 2095 - 1982 and as per manufacturer specifications All
joints shall be finished with joint paper tape by using
jointing compound of India Gypboard Ltd. and applying
over it 3 layers of the filler compound to provide a
smooth surface. The rate shall include making cut outs
for tube lights, spot lights, duct doors, for specified size,
grills etc. for which no extra payment will be paid. Area
of cut outs will be deducted as per IS 1200. All curved
surfaces, recesses, waffles & corbellings shall be part of
the flat area measurement, without any extra cost for the
same. Entire work shall be carried out as per the detailed
technical specifications, drawings and as per the
instruction of Engineer- in- charge. Approved make:
India Gypsum. As By Director By In Charge
38 Providing & Supplying Wooden Conference Table with 1.00 Nos 106050.00
seating capacity of 20 Persons using 18mm thick Century
make BWP plywood and Indian teak wood structure in
combination of 4.0mm thick veneer and decorative 1 mm
thickness laminate with necessary accessories & other
fixture and fastening incl. of PU Polishing etc. using
approved brand quality material & work shall be done as
per drawing & as directed by the Engineer in Charge.
39 Providing & Supplying S. S. Waiting Chair Three Seater 7.00 Nos 7928.50
the seat should be made by high quality cold rolling S. S.
plate, legs, arms & back rest are all S. S. as per image &
material shall be supplied as per sample approved as
directed by the Engineer in Charge.
Item Rate In
Description of Item Quantity Unit Amount
No figures
40 Providing & Supplying Wooden Three Seated SOFA made 9.00 Nos 14645.00
using Indian Teak wood in framing and support of 19mm
thick WP plywood, box of the sofa made with 100mm
Thick High Density 'U' foam in seat and 50mm Thick High
Density 'U' foam in back rest portion with imported
POLYTEEL recron covering on back portion with
textured TAPESTRY black Leather covering and S.S. legs
with necessary fixtures & fastening etc., competed as per
sample approved & as directed by the Engineer in
41 Providing & Supplying Wooden Office Table with 5.00 Nos 12625.00
laminated top having 1520 (L) X 900 (W) X 760 (H) using
18 mm thick BWP plywood & 25mm & 50mm X 12mm
Teakwood patti, formica, handle, fastening & fixture
including cost of all material & Labours with drawer &
shutter, inside one priming coat and two coat of oil
painting. etc. complete as per drawing & sample
approved and as directed by the Engineer in Charge.
42 Providing & Supplying Proactive high back chair BB-PAII- 30.00 Nos 9595.00
02 B, having: 1) Single-Position locking Synchro Tilt
Mechanism. 2) 5-Prong Nylon high-rise base heavy duty
twin wheeled nylon castors. 3) Elegant Height adjusting
PU padded armrest. 4) Class IV gas lift as per DIN
standards. 5) Elegant Leather upholstery, as per sample
approved of GODREJ, BLUEBELL, NILKAMAL make.
43 Providing & Supplying Armada Mid Back Chair BB-AR-02- 20.00 Nos 4545.00
C single position locking Synchro tilt mechanism with
'return-prevention' facility with heavy duty with nylon
castors wheels elegant fabric, upholstery for seat and
nylon mesh for back etc. as per sample approved of
GODREJ, BLUEBELL, NILKAMAL make.
44 Providing & Supplying Curtain of Roller Blinds with 50.00 Smt 606.00
runners, blind fabric, roller thread manual fixtures &
fastening for moving of blinds, etc. completed as per
approved & as directed by the Engineer in Charge.
45 Providing & Supplying Steel Storwels (Godrej Make) 5.00 Nos 23735.00
having dimensions - 900 (W) X 507 (D) X 1950 (L) mm
made up of 20 gauge M. S. Steel Section, with 04 Nos.
adjustable shelves, good quality locking system, powder
coated etc. complete as per sample approved and as
directed by the Engineer in Charge.
Item Rate In
Description of Item Quantity Unit Amount
No figures
46 Providing & Supplying Steel Lockers (Godrej Make) 10.00 Nos 24745.00
having dimensions - 470 (L) X 620 (D) X 710 (H) mm
with central locking mechanism made up of 20 gauge M.
S. sheet powder coated etc. complete, as per sample
approved and as directed by the Engineer in Charge.
47 Providing & Supplying Revolving Swing Mid back chair 30.00 Nos 5555.00
BB-SG-02 D, with permanent contact single position
locking mechanism, 5-prong low rise chrome base fitted
with twin wheels of nylon castors, elegant chrome base
armrest. Premium pneumatic gas lift and elegant nylon
mesh for seat and back, as per sample approved of
GODREJ, BLUEBELL, NILKAMAL make.
48 Providing & Supplying Projector-3500 ANSI Lumens 1.00 Nos 65650.00
1024 X 768, 4:3 with 3000 pixels video signal
SDTV(480i), EDTV(480p), image size 27" X 300" with
remote control functioning and attachable with PC,
Laptop for display with necessary wiring, cabling in
ceiling and clamping, hanging, etc., complete as directed
by Engineer in Charge.
49 Providing & Supplying Screen for Projector with 1.00 Nos 20200.00
motorized screen of 5' X 7' with standard pure white
fiberglass reinforced vinyl including quite motor & roller
system. Wireless handheld remote built in - RF (Radio
Frequency) receiver with necessary attachment etc.,
complete as directed by Engineer in Charge.
50 Providing & Fixing S. S. Plate Signages having size of 14 30.00 Sq. Inch 16.16
In. X 5 In. X 1.0 mm thick name plates of 304 grade
mentioning officers names/designations etc. as per
directions of the Engineer in Charge.
51 Providing Center Tipoi 90 cm x 90 cm. x 40 cm 3.00 Nos 6060.00
(Spacewood / Hermanmiller / Steelcase made) prepared
from teak wood frame 18 mm thick plywood with
mm thick lamination sheet top 12 mm thick float glass
with frost & etching & pale on top inclusive of all exposed
parts covered with lamination & SS.
52 Providing & Supplying Wooden Cub Board for File 24.00 Smt 6467.03
Storage of 2440 (L) X 400 (W) X 760 (H) mm using
19mm thick WP plywood & 25 X 12, 50 X 12mm teak
wood patti, formica, magnet, stopper, handles, fixtures &
fastenings, including cost of all material & Labours, with
one coat primer & two coats Oil Painting inside etc.,
complete as per detail drawing and sample approved &
as directed by the Engineer in Charge.
Item Rate In
Description of Item Quantity Unit Amount
No figures
53 Excavation for foundation upto 1.50 mt depth including 33.00 Cum 117.08
sorting out and stacking of useful materials and
disposing the excavated stuff upto 50 mt lead (A) Loose
or Soft Soil
54 Excavation for foundation upto 1.50 mt depth including 54.00 Cum 149.67
sorting out and stacking of useful materials and
disposing the excavated stuff upto 50 mt lead (B) Dense
or hard soil.
55 Filling in plinth with sand under floors including 6.00 Cum 460.19
watering, ramming, consolidation and dressing etc.
56 Filling available excavated earth (excluding rock) in 18.00 Cum 130.39
trenches plinth side of foundation etc. in layer not
excluding 20 cm in depth consolidation each deposited
layer by ramming and watering etc. complete.
soil in layers of 20 cm thickness including watering,
ramming and consolidation etc. complete.
58 Providing and laying cement concrete 1:4:8 (1- Cement : 5.00 Cum 2640.21
4- coarse sand : 8- hand broken stone aggregates 40 mm
nominal size) and curing complete excluding cost of
formwork in
59 Providing and laying cement concrete work 1:2:4 (1- 11.00 Cum 3746.12
Cement : 2- Coarse sand : 4- graded stone aggregates
mm nominal size) and curing complete excluding cost of
formwork and reinforcement for reinforced concrete
work in (A) Foundations, footings, Base or columns and
Mass concrete
60 Providing and laying cement concrete work 1:2:4 (1- 2.00 Cum 3835.96
Cement : 2- Coarse sand : 4- graded stone aggregates
mm nominal size) and curing complete excluding cost of
formwork and reinforcement for reinforced concrete
work in (D) Columns, Pillars posts and struts upto floor
two level.
61 Providing and laying cement concrete work 1:2:4 (1- 14.00 Cum 3835.96
Cement : 2- Coarse sand : 4- graded stone aggregates
mm nominal size) and curing complete excluding cost of
formwork and reinforcement for reinforced concrete
work in (B) Slabs, landing, shelves, Balconis , Lintels,
Beams, Girders and Cantilever upto floor two level.
62 Providing Fe-500D T.M.T. Bar reinforcement for RCC 4325.00 Kg 76.21
work including bending, binding and placing in position
upto floor two level for Ground Floor.
Item Rate In
Description of Item Quantity Unit Amount
No figures
63 Providing and fixing standard extruded of alluminium 4.00 Sqm 1175.56
section of size 63mm x 38.10mm x 1.2mm (Jindal Section
: 2434 @ Wt. 0.643 Kg/mt) with colour powder coated
alluminium frame for ventilation with 5 mm thick frosted
glass as details etc complete for Ventilation.
64 Providing 15 mm thick cement plaster in single coat on 112.00 Sqm 215.24
brick / concrete walls for interior plastering and finished
even and smooth in C.M. 1 : 4 (1 cement : 4 sand)
including finishing with a floating coat of neat cement
slurry for Ground floor.
65 Brick work using common burnt clay building bricks 14.00 Sqm 4388.47
having crushing strength not less than 35 kg./Sq.Cm. in
foundation and plinth in Cement Mortar 1:5. (1- Cement :
5 -fine sand) (A) Modular
66 Providing 10mm thick cement plaster in single coat on 21.00 Sqm 213.18
fair side of ceiling for interior plastering upto floor two
level finished even and smooth in C.M. 1:4 (1 cement :
coarse sand) including finishing with a floating coat of
neat cement slurry complete. For ceilling Ground Floor.
67 Providing 20mm thick sand faced cement plaster with 59.00 Sqm 329.29
1,2,3 No grade coloured on white stone chips 1x1 cm
grooves as per pattern and colour suggested by this
office consisting of 12 mm thick backing coat of C.M. 1 :
(1 cement : 3 sand) and 8 mm thick finishing coat of C.M.
1:1 (1 cement : 1 sand) for all heights as directed etc.
68 Providing and fixing washbasin with single hole for pillar 6.00 No. 1382.37
tap with C.I. or M.S. brackets painted white including
sutting holes and making good the same but excluding
fittings. (A) Vitreous China (ii) Flat Back washbasin
mm x 400mm size (i) In white colour.
69 Providing and fixing Urinal or approved quality including 12.00 No. 1036.27
conecting the Urinal with waste pipe , tap etc. complete.
(A) White earthenware flat back or corner type size
70 Providing and fixing screw down bib taps of following 12.00 No. 186.83
size (B) Brass chromium plated screw down bib tap
71 Providing and fixing chromium plated brass half turn 6.00 No. 420.64
flush cock of approved quality including fixing in pipe
line etc. complete. (ii) 25 mm. dia.
72 Providing and fixing S.W. gully trap with C.I. grating brick 2.00 No. 1292.20
masonry chamber and water tight C.I. cover with frame
of 300mm x 300mm size (inside) with standard
weight.(i) Square mouth traps. (A) 100mm x 100mm size
Item Rate In
Description of Item Quantity Unit Amount
No figures
73 Providing and fixing Cast iron Spigot and Socket Soil 30.00 Rmt. 890.46
waste and Ventilating Pipe of the following nominal size
100 mm dia.
74 Providing and fixing in position cowl vent to pipes (ii) 4.00 No. 501.87
100mm dia.
75 Constructing brick masonry chamber for underground 10.00 No 3660.76
C.I. Inspection chamber and bends with briocks having
croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.
cover with frame (Light duty) 455mm x 610mm intenal
dimensions total weight of cover with frame to be not
less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame
15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-
coarse sand :4-graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm thick
with cement mortar 1:3 finished smooth with a floating
coat of neat cement on walls and bed concrete etc.
complete.(ii) Inside dimensions 500mm x 700 mm and
450mm deep for pipe line with one or two inlets
76 Providing Erecting and fixing double coated Syntex or 2000.00 Liter 3.95
equivalent PVC (ISI) mark water tank of reqd capacity
each with al necessary fittings & connection etc. comp on
Total Rs.
I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and
words) of the estimated rate mentioned above. Amount of my /our
Tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where
there is a change as per actual mix design the cost of difference of cement consumption have been deducted
from the rate of original item at the rate of input rate mentioned in all the tender.
Deputy Executive Engineer Executive Engineer
City (R&B) Sub Division Bharuch ( R & B ) Division
Bharuch Bharuch
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GRs - Circulars - 1.pdf
GRs - Circulars - 2.pdf
INDEX-GRs.pdf
SBD.pdf
BOQ.pdf
Specification.pdf
4 Building-Specification Booklet (2 side).pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .