SPECIAL REPAIR TO BLDG NO T 8 Skin Ward AT MH RAMGARH CANTT UNDER GE RAMGARH

Amount

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering, complete all as specified and directed.

Dismantling of wooden scantling, purlins, rafter etc., exc 40 Sq.cm and over in section fixed in any position as in framed work, complete all as specified and as directed.

Dismantling of timber fillet, rails, post, rafters, purlins, etc. under 40 Sq.cm in section unframed or framed work complete all as specified and directed.

M & L 2nd class hard wood in scantling roof truss, purlin, etc., clean sawn, complete all as specified and directed by Engr-In-Charge

M & L for roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., and welding counter sunk for holes and necessary gusset plates etc and similar work conforming to Fe-410W (Gde E-250 quality A) complete all as specified and directed by Engr-in-Charge.

M & L for mild steel bolt purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washer and one hexagonal or square nut , exc. 10 cm long, dia of bolt exc 12mm and n.exc 20mm, complete all as specified and as directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, 'U' hook or 'J' bolt, complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, 'U' hook or 'J' bolt, complete all as specified and directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed.

M & L brick work with sub class B old size bricks straight on curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge .

All as per item No.10, here-in-before but except bricks.

M & L brick work with sub class B old size bricks straight on curved any radius half brick wall built in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge .

Taking down cement plaster on brick wall or concrete surface etc.including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed.

M & L for rendering 15mm thick on fair faces of bricks/concrete surface work in cement mortar (1:4) finishing external surface even and smooth without using extra cement, complete all as specified and as directed.

M & L for rendering 10mm thick on other than fair faces of bricks/concrete surface work in cement mortar (1:6) finishing external surface even and fair without using extra cement, complete all as specified and as directed.

M & L for preparation of new plastered surfaces and applying two coats of 'Birla White wall care putty' or 'JK Wall Care putty' to make the entire surface free from undulations, complete all as specified and as directed.

M & L for preparing new putty wall surfaces, priming plastered and other surfaces with alkali resistant primer and applying two coats of oil bound distemper of any shade on wall surfaces, complete all as specified and as directed.

M & L for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered surface and applying two coats of distemper oil emulsion over and including wall care putty of wall, complete all as specified and directed.

M & L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old treated plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

Demolition of cement concrete in ground floors & paving n.exc 15cm thickness (below or above ground level) complete all as directed by Engr-in-Charge

M & L for providing 75 mm thick cement concrete 1:4:8 type D-2 (Using 40mm grade stone aggregate) as in sub floor , sub base of floor finished even and rough complete all as specified and directed.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 using 20mm graded stone aggregate as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 and sand in the ratio 1:3, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish of the premises complete all as specified and directed.

M & L for cement concrete type B1, 1:2:4 (using 12.5 mm graded aggregate) in levelling courses, coping, window cill etc., complete all as specified and directed.

M & L for 9-10 mm thick coloured vitrified ceramic tiles of size as in floor, exc 0.18 Sqm and n.exc 0.36 Sqm set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

M & L for 9-10 mm thick coloured vitrified ceramic tiles of size as in skirting, exc 0.18 Sqm and n.exc 0.36 Sqm set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar (1:4), complete all as specified and directed.

M & L non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe. 0.11 sqm but n.exe.0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L for glazed ceramic coloured tiles 300x450X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including rendering 10mm thick with cement mortar (1:4) on fair faces of brick work to received tiles in vertical, complete all as specified and directed.

M & L PCC 1:2:4, type B-1 (using 20mm graded aggregate) for bed block for fillings for hold fasts etc., complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking of shutter from the frame) of any descipriton n.exc 1.5 sqm each complete all as specified and directed by Engr-In-Charge .

Taking down chowkhat or frame with shutter (without taking of shutter from the frame) of any descipriton exc. 1.5 Sm but n.exc 4 sqm each complete all as specified and directed by Engr-In-Charge .

M & L Chowkhat 2nd class hard wood and frames wrought, framed rebated on the solid rounded or chamfered , put together with glue pinned at joints complete all as specified and directed by Engr-In-Charge

M & L for 35mm thick plain framed, panelled shuuter (three panel) with lock rail and panel of 9mm BWP commercial ply. The size of rail and style as per IS: 1003 (Part-1), complete all as specified and as directed.

S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. fitted to chowkhats for doors etc., complete size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engr-In-Charge .

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S & F 100mm butt hinges medium weight medium cold rolled mild steel complete all as specified and directed by Engr-In-Charge .

S & F aluminium alloy anodised sliding door bolts with hasp and staple and fixing clips of sheet, cast extruded section and fixing bolts and sliding bolts of extruded section on 300 mm long, complete all as specified and as directed.

S & F 150mm long aluminium handle cast type, anodised, complete all as specified and as directed.

M & L painting on new wooden based surfaces of any description not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .

M & L for one coat of synthetic enamel paint to wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and directed.

M & L anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, window and ventilator shutters, fixed/sliding track, two or three track, aluminium partition including frames, glazing clips, cleats side hung type without sash bars, fixed window, ventilators etc., with one or more rebates including jointing cleat for fixing etc., complete all as specified and as directed.

S & F anodised aluminium sliding door shutter powder coated (minimum thickness of powder coating 50 micron), aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing, rubber neoprene packing, handles 2 Nos in each door, anodised aluminium snap beading, screws, top rail, guide rails, complete all as specified by Engr-in-Charge.

S & F anodised aluminium window and ventilators shutters, side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinge type B-21, 100 mm long (2 No), suitable handle (1 No), complete all as specified by Engr-in-Charge.

M & L for 5.5 mm thick plain sheet glass/tinted glass area exc 0.50 Sqm in each pane fixed to aluminium frame work including rubber gasket etc.,, complete all as specified and as directed by Engr-In-Charge .

M & L for 4mm thick plain sheet glass/tinted glass area n.exc 0.50 Sqm in each pane fixed to aluminium frame work including rubber gasket etc.,, complete all as specified and as directed by Engr-In-Charge .

M & L 12 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination fixed in aluminium shutter/partition, complete all as specified and directed by Engr-In-Charge .

S & F anodised aluminium GRILL 5mm thick or its equivalent fixed with U-aluminium channel with screws in window, ventilator, wall screws anodised aluminium fittings such locking arrangement, complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples, complete all as specified and directed by Engr-In-Charge .

S & F 4 lever mortice lock vertical type size 65 mm long, complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) including cover fillet, complete all as specified and directed.

M & L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate chanel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n.exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel at 457 mm centre to centre including hanger of 4mm dia., GI (upto 1200 mm length) , complete all as specified and as directed.

M & L for seamless calcium silicate ceiling made out of 1800x1200 x 12 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish, complete all as specified and as directed. (Note: Framework for ceiling shall be measured and paid separately)

M & L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over two coats of wall care putty, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 15mm dia pipe, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked laid in trenches suitable for 15 mm bore, complete all as specified and as directed.

Refixing of GI tubing and connection including new GI fittings complete in trenches/wall/ceiling/floor suitable for 15 mm dia pipe, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 20mm dia pipe, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked laid in trenches/walls/floor or ceiling suitable for 20 mm bore, complete all as specified and as directed.

S & F bib tap, cast copper alloy chromium plated, fancy type, with capstan head handle screwed down, screwed for iron pipe to 15mm bore pipe after taking down of old brass bib tap, complete all as specified and as directed.

Disconnecting existing water tanks of capacity n.exc. 500, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required for reconnecting and re-fixing in position.

S & F 500 Ltr capacity rotational moulded polyethene water storage tanks in two layers, (cylinder vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and as directed.

S & F Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/20mm-210 gms and fixed to dia of pipe 20mm as in repairs, complete all as specified and as directed.

S & F in repair, Stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bore 20mm fixed, complete all as specified and directed.

S & F in repair angle stop cock fancy type, brass chromium plated with CP wall cap 15mm bore, complete all as specified and as directed.

S & F in repair two way angle stop cock fancy type, brass chromium plated with CP wall cap 15mm bore, complete all as specified and as directed.

S & F of CP health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including connections and fixed in position, complete all as specified and directed.

S & F in repair stop cock of 15mm bore , chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.

S & F in repairs 10 litres capacity PVC low level flushing cistern including flush pipe, float valve, siphon etc, including 32 mm dia PVC flush pipe of required length, including two Nos. PVC brackets, complete with all fittings complete all as specified and directed by Engineer-in-charge.

S & F in repairs water closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.

S & F in repair vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and including seat and cover for pedestal pan, complete all as specified and directed.

M & L granite (of any type) work (tabled rubbed and polished) of any shade 18 to 20 mm thick in cooking platform, steps, window, cills etc., over and including 15mm thick cement screed base in CM (1:4) laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab and demolition of old slab where directed, complete all as specified and as directed.

S & F vitreous China wash basin, star white, oval type, size 560X410mm including, 32mm CP brass waste fitting, 32 mm PVC waste pipe, fixed on RCC slab and making good disturbed surfaces in cement mortar (1:3), complete all as specified and directed.Make:- Hindware/Parryware/Cera or of equivalent approved make.

S & F in repair 15mm dia central hole basin mixer with U shaped round crater spout with 450 mm long braided hoses (hot & cold), complete all as specified and as directed.

M & L for PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.

S & F, 110mm bore PVC (SWR) bends any radius with rubber ring joints, complete all as specified and as directed by Engineer-in-charge.

S & F in repair, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors,complete all as specified and as directed by Engineer-in-charge.

S & F in repair, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls, including PVC clamps etc. complete all as specified and as directed by Engineer-in-charge.

S & F, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floor, complete all as specified and as directed by Engineer-in-charge.

S & F, 75mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.

S & F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal, complete all as specified and as directed.

S & F PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal, complete all as specified and as directed.

S & F PVC (SWR) 110 mm bore junction double, (double T) equal or unequal, complete all as specified and as directed.

S & F PVC (SWR) 75 mm bore junction double, (double T) equal or unequal, complete all as specified and as directed.

S & F 110mm bore PVC(SWR) vent Cowl complete all as specified and directd.

S & F 75 mm dia outlet PVC(SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed.

Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,complete all as directed by Engr-in-Charge

M & L for RCC(1:1.5:3) type A-1 using 20mm graded stone aggregate as in lintel beam, cantilever beam, bressumers supported on walls, beams and columns and the like etc., including necessary formwork, complete all as specified and as directed.

M & L for RCC(1:1.5:3) type A-1 using 20mm graded stone aggregate as in slab supported on walls beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like etc., complete all as specified and as directed.

S & F mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed.

S & F mild steel TMT bars 5mm dia and over cut to length, bent to shape required including cranking bending with MS wire (annealed) not less than 0.90mm dia or securing with clips as in stirrups, complete all as specified.

S & F in repair Harrison rails, mild steel, chromium plated with fixing in bracket etc., complete all as specified and as directed by Engr-in-Charge.

S & F in repair 4mm dia GI Wire as in wall for necessary hooks/bolting for hanging clothes/mosquito net etc., complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket bell or power) complete with all fitting such as batten, switch, ceiling rose, pendant, regulator, socket and brackets switch fuse etc removing materials from site and making good disturbed surfaces of walls, floors etc to match the existing surface all as directed .

M & L for point wiring for one light/fan/exhaust fan point bell controlled by one way switch 5 Amp with 1100 volt, 1.5 Sq mm multi stranded FRLS copper conductor cable with continuous earth wire of 1.5 Sq mm multi stranded copper FRLS conductor cable PVC insulated unsheathed drawn in and including concealed rigid non metallic PVC conduit medium grade with fitting (ISI marked) not less than 20mm dia & sunken anodised pressed steel sunken bore made out of not less than 1.6 mm thick sheet, with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/fixing switches etc., complete all as specified and directed.

All as per item No 98 here-in-before but one 5 Amp socket outlet on the same board.

All as per item No 98 here-in-before but one 5 Amp socket outlet on independent board.

M & L for point wiring for 15 Amp power controlled by one 15 Amp switch with 1100 volt, 2.5 Sq mm multi stranded FRLS copper conductor cable with continuous earth wire of 2.5 Sq mm PVC insulated fire retardant cable, including PVC conduit medium grade with fitting (ISI marked) not less than 20mm dia & sunken anodised pressed steel sunken bore made out of not less than 1.6 mm thick sheet, with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/fixing switches etc., complete all as specified and directed.

S & F switch piano flush button single pole one way 5 Amp, complete all as specified and as directed.

S & F Switch socket combination 2 in 1, 3 pin, 5 Amp and 15 Amp flush type, universal, complete all as specified.

S & F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type, universal, complete all as specified.

S & F Switch socket outlet 2 in 1, 3 pin, 5 Amp flush type, universal, complete all as specified.

Supply and fix ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified.

S & F lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified.

S & F LED Bulb of capacity 15 Watts lumen output (500) length 102 mm dia 56 mm base cap B22, (ISI marked) complete with all accessories base (ISI marked) all as specified and directed by Engr-in-Charge. Cat Part no. LHLDDEEEML8R015 of Havells or its equivalent Of make Bajaj/Phillips/Crompton Greaves, complete all as specified and as directed.

S & F in repair retro LED light fitting 1 x 22, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engr-in-Charge. Make: Havells/Bajaj/Crompton Greaves/Phillips.

S & F bulkhead luminaire comprising of high brightness LEDs, 1x9W/1x10W LED, IP-65, complete all as specified and as directed. Make: Havell/Bajaj/Phillips/Crompton Greaves.

S & F in repair LED light fitting mirror type with high output diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. Make: Havell/Bajaj/Phillips/Crompton Greaves.

S & F exhaust fan, steel body AC single phase, 230V of size 300 mm sweep with blades and frame and louvers, complete all as specified and as directed. Make: HAVELLS/BAJAJ/USHA/CROMPTON GREAVES/KHAITAN.

Labour only for hanging ceiling fan (MD supply), complete with blades, down rods and accessories and connecting up including provision of cable from ceiling rose or connector to fan hanging only, complete all as specified and as directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc, complete all as specified.

S & F sheet metal enclosures for DBs when MCBs to used single pole and neutral (SPN) double door 240 volts, 12 way with IP-43 IK-09 protection including 200 Amp bus bar and neutral link (ISI marked), complete all as specified and as directed.

S & F amp rating 240V, 10 kA 'B' Curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and as directed. Make: Indo Asian or its equivalent make in Havells/Standard/L&T.

S & F sheet metal enclosures for DBs when MCBs to be used in vertical tipple pole and neutral (VTPN) double door 415 volts, 6 way, with IP-43 IK-09 protection including 200 Amp rated bus bar and neutral link (ISI marked), complete all as specified and as directed.

S & F 415V, 10 kA 'B' Curve miniature circuit breaker (MCB) of TPN and current carrying capacity 100 Amp in the DB complete with connection testing and commissioning all as specified and as directed. Make: IndoAsian or its equivalent make in Havells/Standard/L&T.

S & F 240V, 10 kA 'B' Curve miniature circuit breaker (MCB) of SP and current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and as directed. Make: IndoAsian or its equivalent make in Havells/Standard/L&T.

M & L Sub main wiring two single core 4.0 Sqmm PVC insulated FRLS multistanderd copper conductor cable and one run of 4.0 Sqmm PVC insulated unsheathed FRLS multi stranded copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia, complete and making good disturbed surface wall complete all as specified and as directed. Note : - Not : 2 runs of 4 Sqmm cable, 1 run of earth wire 4 sqmm and PVC counduit shall be measured as one unit length.

Supplying and laying and testing cable XLPE insulated, sceened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts with stranded aluminium conductor of size 50 Sq. mm 3.5 core nominal cross section, complete all as specified and as directed.

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out for laying pipes as in soft and loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm, complete all as directed.

Removing excavated materials n.exc. 50 m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as directed.

M&L for reinforced precast concrete cable cover class LV, type 1, flat, size 250 mm x 150 mm x 40mm all as specified and directed.

M & L for sand cushioning for protection of underground cables, consolidated and compacted with clean dry sand all as specified and as directed by Engr-in-Charge. (Note: The depth of sand shall be measured after puning only)

Supply and laying GI pipe 50mm bore light grade with fitting for cable protection at road crossing/under concrete including taking down of old one, complete all as specified and as directed.

M & L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregate including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt in alternate layer of 15cm surrounding the plate complete and earth lead connected to DB board, including testing complete all as specified and directed. Note : Earth test result should not less than one ohm.

Supply and fixing electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all connected accessories such as safety valve, thermostats, heating element, NRV, connection piece, stop valves, water connection from tank to geyser, etc., complete all as specified and as directed.

S & F sheet metal enclosures, single pole and neutral (SPN) with two pin and earth plug socket, complete with one single pole MCB 20 Amps, complete all as specified and as directed.

S & F PVC connecting pipe 15mm size with PTMT nuts of length 450mm, (ISI marked) connect to hot and cold water, complete all as specified and as directed.

S & F 15 mm dia stop valve of cast copper alloy, screwed down, high pressure, with crutch, fancy type, chromium plated, with long shank and cup(concealed), complete all as specified and directed.

M/S ARJUN SINGH

M/S SHAMBHU SHARAN SINGH

M/S Parmar Construction

M/s Ray construction