TENDER FOR SUPPLY OF 1/2Inch (15 MM) GI PIPES

Unit Rate Total Amount

Sr. No. Item Description Make Unit Qty.

GI PIPES 1/2” (15 MM) IS: 1239 “C” Class

Heavy with Powder Coating

Technical Specifications:

Sr. No. Description Technical Requirements / Specifications

1 Pipe Type Galvanized Pipes with Powder Coating

2 Pipe Size 1/2”(15 MM) & 1” (25MM)

3 Standard IS-1239 :

4 Thickness 3.2 mm & 4.0 mm

5 Pipe Length in Single Piece 6 Meters (+6 % / -0%)

Appollo /Jindal/Indus/Goodluck/Surya/TT Swastik /Vishal/Ravindr

7 Class “C” Class - Heavy

8 Chemical Compositions IS 1239:2004 Table No.

A. Tensile Strength: Min.-320 Mpa

9 Mechanical Properties

B. % Elongation - Min. 12%

10 Straightness The Finish Tube shall be reasonable straight

Workmanship, Finish & Tubes shall be cleanly finished and reasonably free from injurious and shall

Appearance be cleanly cut and reasonably square with the Axis of the tube

12 Tube Ends Plain Ends Square Cut to Axis

Galvanizing- Mass of Zinc

13 400 Gm/M2 (Min.)

14 Uniformity of Zinc Coating No Red Spot, Free from Lumps, Excess Zinc, Free from White Rust

Marking shall be at the interval of not more than 1 meter.

Each pipe shall be embossed/engraved with

1. Manufacturer’s Name/Trademark

15 Product Marking

2. Indian Standard Mark (ISI)

3. Size Designation

4. Class of Pipe

Each Bundle of 30 Meters (i.e. 5 pieces x 6 Mtrs.)

16 Bundling & Packing

With Polythene/Equiv. wrapped Packing

A. Powder Type: Pure Polyester (Pure PPG)

B. Colour: Golden Yellow - Glossy Finish

17 Powder Coating

D. Powder Coating Thickness: 60 to 80 Micron

CITY GAS DISTRIBUTION PROJECT

CHAROTAR GAS SAHAKARI

TENDER FOR SUPPLY OF 1/2” GI PIPE WITH

MANDALI LIMITED

Please note following CGSML’s zero deviation Terms and Conditions:

1. Payment Terms: 100% Payment against receipt of certified Tax invoice within 30 days.

2. Transportation: (CGSML Store, Bakrol) - is in Supplier’s Scope

3. Loading and Unloading: Supplier Scope

4. Packing, Forwarding and Transit Insurance - Supplier’s Scope

5. Scope of Supplier: Supply of material along with Test certificate and material Warranty Certificate.

6. Third Party Inspection: From reputed Third Party Agencies approved by PNGRB - Supplier’s Scope

7. Delivery Period: 100% of tender Qty. within 15 to 20 days from the date of PO. (Part Dispatch as per our

8. Taxes will Charged Extra at Actual

9. Guarantee/Warranty – 12 months from the date of commissioning or 18 months from the date of supply

(SEAL AND SIGNATURE OF BIDDER)