CMLRRP CHC ROAD Sl No 467 Mullassery GP Manaloor LAC Thrissur.

Amount

Retarring

75.5.5.B.2pb : Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

75.5.2.1pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

75.5.9.1.2pb : 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder - Bitumen S-65 - Packed Bitumen Rates<br> Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. <br> Case - I By Manual Means <br> (II) Bitumen (S-65)

75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case III : Type C <br> (II) Bitumen (S-65)

drain

3.5.1 : Excavation in Cutting in Soil by manual means with lead upto 50 mExcavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

11.4.1.1 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203I.P.C.C grade M 10(i)Nominal mix 1:3:6

11.4.2.1 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 II.P.C.C grade M 15(i)Nominal mix (1:2.5:5)

od839023/2020_2021 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802,803,1202,1203 .P.C.C grade M20 (1) Nominal mix (1:2:4) (Modified data 11.4.3 &amp;11.4.4).

11.4.4 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203IV.R.C.C grade M 20

11.8 : Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

od839867/2020_2021 : Filling up low lying and water logged areas with local material/quarry muck,spreading in layers,levelling top at site and consolidation by ramming etcimproving CBR value of subrade

od859627/2020_2021 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 &amp; 1203&lt;br&gt;III.P.C.C. grade M 20 &lt;br&gt;(i)Nominal mix (1:2:4)

Name board

od839757/2020_2021 : Providing and erecting Name Board of semi Reflective type as per IRC-67 made of 2&lt;br&gt;mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective&lt;br&gt;border of 70 mm width and required letters, figures with reflective tape of engineering grade as per MORD&lt;br&gt;specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12 SWG&lt;br&gt;square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly&lt;br&gt;fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x&lt;br&gt;450 mm x 450mm, 450 mm below ground level as per approved drawing and Technical Specification Clause1701(10.4 B Mod)&lt;br&gt;&lt;br&gt;&lt;br&gt;

od839758/2020_2021 : Supplying and fixing granite name board including cost of granite,labour for lettering,fixing etc.complete

Bidder Name

FIROS P M