Construction of Damaged Portion of Compound Wall in the Agrl. Market Yard, Narasannapeta of AMC, NArasannapeta in Srikakulam District

Cleaning duly using JCB including with cleaning jungle and uneven surface spreading for other items including cost and conveyance of all materials and all labour charges etc., as per standard specifications as directed by the Engineer-in-charges.

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.

Filling with Below 2.36mm HBG chips under footings with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational & incidental charges, labour charges, hire and opertaional charges of T & P etc., complete for finished item of work.

P.C.C (1:4:8) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work

VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work For Columns Footings

VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work For Columns and Pedestals Upto Ground Level

VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work For Ground Level Beam

VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work For Above Ground Level Columns

Brick Masonry in C.M. (1:6) prop. Using 2nd class well burnt bricks from approved quarry free from warping, distortion cracks, chips, flows stones and nodules free from lime in accordance with IS-3495-1966 and screened sand including cost and conveyance of all materials to site, scaffolding charges of all materials, lifting charges, curing and labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specification referred and as per the direction of the departmental officers.

Plastering 12mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand (screened), water etc., to site, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work

Plastering with CM(1:5) Prop: 20mm thick including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. BLD CSTN 6.8

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.

Colour Washing Two coats with best quality Gopi Colour including cost and converyance of all materials such as lime, gum, brushes and all labour charges etc., complete for finished item of work as per SS and as directed by the Engineer-in-Charge. (BLD CSTN 9.8)

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of Steel bars from approved sources to site of work, binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastages like Overlaps, couplings, chairs, spacer bars etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes on all materials complete for finished item of work (APSS No. 126) BLD CSTN 2.18 Or (2011-12 SSR AMENDMENT TO BUILDINGS STANDARD DATA No. 5)