REPAIR/ PAINTING OF STEEL AND WOODEN FURNITURE AT AF STN JODHPUR

Amount

REPAIR TO CHARPOY GI PIPE, FD-220

Removing old unserviceable nylon newar from charpoy GI pipe and S&F 12 mm thick BWR Gde plywood commercial type of size 1980x900mm to charpoy GI pipe frame by providing 03 Nos of flat Iron at equal distance size 40mm wide x 6 mm thick and length shall be provided by existing charpoy GI and flat iron shall be fixed tightly to Charpoy GI with the help of suitable nut, bolt & washers of size 62-65mm & 6mmdia by drilling holes into GI pipe alongwith any welding if required. The plywood shall be fixed on the charpoy by drilling 16 Nos holes (03 Nos on each long rail, 2 Nos on each Short rail & 2 nos on each iron flat) & fixing with nut bolt alongwith suitable size of washer of size 62-65mm and 6mm thick and all as specified & directed by Engineer-in-Charge. Make of Plywood : Greenply/Kitply/Century ply

M&L for removing unserviceable three way elbow 32 mm dia and S&F new three way elbow 32 mm dia medium grade (ISI marked) and all shown in drawing.

M&L for removing unserviceable check nut of 32 mm dia & S&F new check nuts 32 mm dia, 6 mm thick of best quality and all as shown in drg.

M&L for removing the threadless/broken long rails from charpoy GI pipe 32 mm dia and Supply and fix new long rail made of 32 mm dia GI pipe medium grade 1.88 mtr long threaded at both ends and fix to existing three way elbow 32 mm dia and all as show on drg. Make of GI pipe : TATA/Jindal/Prakesh

Taking out existing old broken short rail from Charpoy GI 32 mm dia and providing in position 2 Nos short rails made out of broken long rail obtained from taking down above items No. 5.04 including threading on both ends complete fixing all as specified and shown in drg. Note : U/s check nuts to be replaced in above items & measured and paid as supply only under relevant items.

Taking out existing old broken legs from Charpoy GI 32mm dia and providing in 1 Nos new legs in position made out of old broken short rails obtained from taking down above item No. 5.05 and S&F 3 mm thick 40 mm dia MS plate welded at bottom of leg and including threading on top portion end complete all as specified & directed by Engineer-in-Charge.

M&L for removing the old unserviceable Nylon Newar from Charpoy GI pipe 32 mm dia and Supply & reweaving with white colour new nylon newar 50 to 55mm wide closely double knitted and complete all as specified and directed by Engineer-in-Charge. Note : Weight of Nylon Newar shall not be less than 1.50 Kgs per charpoy. Make of Nylon Newar : KONARAK/USHA/DCM/MANGALDEEP/STAR.

M&L welding to the dislocated iron flats of Charpoy GI pipe earlier converted to Plywood top to the long/short rails.

M&L for removing old unserviceable plywood/MDF board top from the Charpoy GI pipe and S&F with new 12mm thick BWR Gde plywood commercial type of Size 1980x900mm and all as directed by Engineer-in-Charge. Make of plywood : Greenply/Kitply/Century ply

ALMIRAH LARGE STEEL WITH SHELVES, ALMIRHA STEEL ½ HANGING ½ SHELVES (FD-1031 & 1033)

Removing UNSV shelves from almirah large steel & S&F new shelves made out of 1 mm thick plain sheet fixed with appropriate clamps/screw/nuts & bolts complete all as specified and directed by Engineer-in-Charge.

Removing UNSV locks from almirah & S&F new 6 levers locks, Godrej pattern, with duplicate and key & hole cover and all as specified & directed y Engineer-in-Charge. Make of Lock : HARRISON/GODREJ/LINK of Equivalent make

Removing UNSV handle & S&F new steel anodized handles Godrej pattern with suitable bolts and all as specified & directed by Engineer-in-Charge. Make : Godrej/Harrison or Equivalent make

Removing UNSV locking assembly & S&F new locking assembly with cover complete all as specified and directed by Engineer-in-Change.

Removing UNSV hanging rod & S&F new hanging rod 20mm dia, 16 Guage thick made of stainless steel conduit pipe with sockets complete all as specified & directed by Engineer-in-Charge.

M&L for denting/painting of Almirah large steel both internally and externally with synthetic enamelled paint of silver/grey colour with spray gun after properly smoothening the steel surface with the help of sand paper/ electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge. Make of Paint : Berger/Asian paint/Jonson and Nicholson Paints.

ALMIRAH MEDIUM STEEL W/SHELVES: FD-1032

Removing UNSV shelves from almirah Medium steel & S&F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/nuts bolts complete all as specified & directed by Engineer-in-Charge.

Removing UNSV locks from almirah Medium steel & S&F new 6 levers locks, Godrej pattern, with duplicate and key and hole cover and all as specified & directed by Engineer-in-Charge. Make of lock : HARRISON/GODREJ/LINK of Equivalent make

Removing UNSV handle & S&F new steel anodized handles Godrej pattern with suitable bolts and all as specified & directed by Engineer-in-Charge. Make : Godrej/Harrison or Equivalent make

Removing UNSV locking assembly & S&F new locking assembly with cover complete all as specified and directed by Engineer-in-Change.

M&L for denting/painting of Almirah medium steel both internally and externally with synthetic enamelled paint of silver/grey colour with spray gun after properly smoothening the steel surface with the help of sand paper/ electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge. Make of Paint : Berger/Asian paint/Jonson and Nicholson Paints.

LOCKER BED SIDE STEEL

M&L for denting/painting of locker bed steel both internally and externally with synthetic enamelled paint of silver/grey colour with spray gun after properly smoothening the steel surface with the help of sand paper/ electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge. Make of Paint : Berger/Asian paint/Jonson and Nicholson Paints.

Removing UNSV & S&F hasp & staples 75 mm long as per drg complete all as specified and directed by Engineer-in-Charge.

Removing UNSV & S&F MS steel CP handles 100 mm as per drg complete all as specified and directed by Engineer-in-Charge.

Removing UNSV & S&F stainless steel conduit pipe 20 mm dia as a handing rod 16 guage thick as per drg complete all as specified and directed by Engineer-in-Charge.

Removing UNSV & S&F new shelves made out of 1mm thick plain sheet all as per drg complete all as specified and directed by Engineer-in-Charge.

TABLE OFFICE CLERK STEEL : FD-1004&84

Removing UNSV top & S&F new top made out of pre-laminated partial board 18 mm thick exterior gde as approved shade and 6 mm thick first class teakwood edging fixed with all around the top & edging polishing with matching the colour of top complete all as specified & directed by Engineer-in-Charge.

Removing UNSV & S&F new drawers made out of 1mm thick plain sheet shape and size all as per drg. complete all as specified & directed by Engineer-in-Charge.

Removing UNSV locks from & S&F new 6 levers locks, Godrej pattern, with duplicate and key and hole cover and all as specified & directed by Engineer-in-Charge. Make of lock : HARRISON/GODREJ/LINK of Equivalent make

M&L for denting/painting of Table office clk steel to external surface & drawer & drawer cabinet to external & internal surfaces with synthetic enamelled paint of silver/grey colour with spray gun after properly smoothening the steel surface with the help of sand paper/ electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge. Make of Paint : Berger/Asian paint/Jonson and Nicholson Paints.

Removing UNSV & S&F best quality hard rubber shoes to legs complete all as specified & directed by Engineer-in-Charge.

REPAIR TO TABLE BED SIDE (MAP) (FD/MAP/07)

M&L for removing old UNSV drawer with telescopic channel from table bed side and S&F new drawer made out of 12mm thick both side pre laminated particle board exterior grade for sides and 18mm thick both side pre laminated particle board exterior grade colour shade matching with existing board for front & back of drawer including 12” long telescopic channel heavy duty from both side of drawer dully fixed suitable screw and all as specified & directed by Engineer-in-Charge. Make of pre-laminated particle board : CENTURY PLY/ACTION TESA/ BHUTAN BOARD

M&L for removing old UNSV left or right side from table bed side and S&F new left or right side made out of 18mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board duly fixed with suitable screw/nails and all as specified & directed by Engineer-in-Charge. Make of pre-laminated particle board : CENTURY PLY/ACTION TESA/ BHUTAN BOARD

M&L for removing old UNSV cabin shutter from table bed side and S&F new shutter made out of 18mm thick both sides pre laminated particles board exterior grade colour shade matching with existing board duly fixed with suitable hinges matching with existing hinges fixed with screw/nails and all as specified & directed by the Engineer-in-Charge. Make of pre-laminated particle board : CENTURY PLY/ACTION TESA/ BHUTAN BOARD

M&L for removing old UNSV top or bottom from table bed side and S&F new top or bottom of 18 mm thick both sides pre laminated particle board exterior grade colour shade matching with existing board duly fixed with suitable screw/nails and all as specified & directed by the Engineer-in-Charge. Make of pre-laminated particle board : CENTURY PLY/ACTION TESA/ BHUTAN BOARD

M&L for removing old broken handles from drawer/shutter of table bed side and S&F new S/S ‘C’ shape handle 50mm wide duly fixed with suitable machine screw and all as specified & directed by the Engineer-in-Charge.

TABLE ‘3X2’ (900X600X760MM) WITH DRAWER/WITHOUT DRAWER (FD-223/224/283/1007/1008)

Repair of table with or w/o drawer replacement of unserviceable top with commercial particle board 19mm thick as per drg. of make CENTURY PLY/ACTION TESA/BHUTAN BOARD ISI marked with 1st class HW teak wood beading 6mm thick including polishing (two or more coats over a coat of wood filler etc.)

All as per item No. 7.01 but replacement of table frames long rail with S&F new table frames long rail made out of 1st class HW teak wood complete all as shown on drawing & as directed by the Engineer-in-Charge.

All as per item No. 7.01 but replacement of new drawer made out of 1st class hard wood (Teak wood) with aluminium anodized 35mm/40mm dia knob complete all as shown on drawing & as directed by the Engineer-in-Charge.

All as per item No. 7.01 but replacement of table frames short rail with S&F new table frames short rail made out of 1st class hard wood (Teak wood) complete all as shown on drawing & as directed by the Engineer-in-Charge.

All as per item No. 7.01 but replacement of bottom centre stiffener with S&F new bottom centre stiffener complete made out of 1st class hard wood (Teak wood) complete all as shown on drawing & as directed by the Engineer-in-Charge.

All as per item No. 7.01 but replacement of new aluminium anodized 35mm/40mm dia knob complete all as shown on drawing & as directed by the Engineer-in-Charge.

All as per item No. 7.01 but replacement of rubber shoes with S&F new rubber shoe of superior quality with steel plated screw of suitable size complete all as directed by the Engineer-in-Charge.

Supply and fixing in repair new legs made out with 1st class hard wood as per existing or as per Drg polishing with French polish (two or more coats) over a coat of wood filler after preparation of surface etc.

TABLE DINING 8 PERS (FD-239/273/115) : Repair to table dining 8 pers including dismantling/removal of all broken parts and replacing with new parts of well-seasoned Indian Teak wood as under complete all as specified under directed.

Top made out of 18mm thick pre laminated particle board shaes and texture as approved by Engineer-in-Charge with matching Indian Teak wood edging. Make : CENTURY PLY/ACTION TESA/ BHUTAN BOARD

Long Rail

Short Rail

Indian Teak wood corner size 75mm x 75mm to table between legs and rail fixed with screw

Centre Stiffener

Rubber/PVC Shoes

Scratching the entire wooden pallets of peg table filling putty to the bore holes making surface smooth by scratching it with an electric grinder and shall be French polished in wallnut shade & finishing it with melamine top coat complete all as specified under directed.

TABLE ‘3X3’ (900X900) (FD-88/291/1009) : Repair to table dining ‘3x3’ (OR’s) including dismantling/removal of all broken parts and replacing with new parts of well-seasoned Tear wood as under complete all as specified under directed.

Top made out of 18mm thick pre laminated particle board shade and texture as approved by Engineer-in-Charge with matching Indian Teak wood edging. Make: CENTURY PLY/ACTION TESA/ BHUTAN BOARD

Leg made out of 1st Class Teak wood

Long Rail made out of 1st class Teak wood

Short Rail made out of 1st class Teak wood

Indian Teak wood corner size 75mmx75mm to table between legs and rails fixed with screw.

Centre stiffener

Rubber/PVC shoes

Scratching the entire wooden pallets to Table ‘3x3’ filling putty to the bore holes making surface smooth by scratching it with an electric grinder and shall be polished in French polish complete all as specified under directed.

SK INDUSTRIES

Vinayak Distributors

KAMAL ENTERPRISES

B.S Constructions