Improvement of water supply to Newly Developed area to Rairangpur Muncipality in Mayurbhanj District

Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.

Supplying & Laying in trenches Centrifugally cast (SPUN) DUCTILE IRON Pressure Socket & spigot pipe of Class - K7 without cement mortar lining conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing.., as per the specification, all complete as per direction of engineer-in-charge ( Earth work in trenches jointing of pipes specials and fitting to be meausred separately) including transportation of all materials to site, all complete. within 5 km lead

100mm dia D.I. Class-K7 pipe

Supplying all materials, labour and T & P etc. and making Tyton joint using rubber rings to spun iron Cast Iron pipes and fittings of the following nominal diameter including testing of the joints as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. (including cost of ring)

100mm dia Rubber Tyton Joint

Supplying all materials, labour and T & P etc. and laying in trenches double socket Cast Iron bends, fittings and specials conforming to I.S : 1538 of the following sizes as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. (including cost of D I Fittings.

D I Fittngs and specials

100mm dia MJ Socketed Tail Piece

Supplying all materials Labour & T & P for Fixing Ductile Iron Resilient seated Sluice Valve / NR Valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve .VAG/TALIS/AVK/Hawle

100mm dia. Sluice Valve, Rating P.N – 1-60 delivery line/filter bed compresor

Supplying all labour and T&P for cutting of following dia C.I./D.I. pipe of following thick in treanches by gas cutter set of pocket etc all complete.

Supplying all materials, labour and T & P etc. and construction of valve chamber of following sizes with 100mm thick sand filling in foundation, lean cement concrete (1:4:8) of 150 mm thick,Fly ash brick masonry in cement mortar (1:4) of 250mm thick wall in foundation and plinth, 12 mm thick cement plaster (1:4) inside and outside, 100 mm thick cover slab in M20 R.C.C. (1:1½ :3) using minimum reinforcement of HYSD bar in cover slab at 100Kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering, earthwork in all kinds of soil and refilling etc. as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete.

Sluice Valve Chambers of inside size0.75mx0.75mx1.225m

Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.

114.30mm OD M.S.Pipe 5.40 mm thick

100mm M.S. Flange.(10mm thick)

100mm dia x 45° M.S. Bend

100mm dia x 90° M.S. Bend

100 x100 x100 mm dia M.S. plain Tee

Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete

Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes upto 8mm thick and fittings at site by using welding generator including testing of joints, as per specification complete

100 mm dia pipe

Supplying all materials, labour and T&P for making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of E.I.C

100 mm dia pipe

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately

Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Supplying all materials, labour, T&P and filling in pipe line trenches with sand well watered and rammered including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc all complete as per specifiation and direction of Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete(1:3:6) with 40cm size crusher broken black hard granite metal including watering, curing, conveyance of all materials to work site, payment of royalty & labour cess etc all complete as per specifications and direction of Engineer-in-charge.(Mending the C.C Road)

Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as p[er the direction of Engineer-in-charge.

Supplying all labour and T &P foFiilling in foundation & plinth with excavated earth as per direction of Engr.-in-charge .

Supplying all materials , Labour & T & P for providing House service connections to beneificiares from PHE Deptt./WATCO CI/DI pipe line to the property of beneficiaries ( both new & existing)/ Repair of House connection with extension of service etc. including earth work excavation ,cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damages road with CC (1:2:4) after completition of the work, lifting of excess excavated materials / debrises from work site & disposed within 5 KM radious by mechanical transport , fixing 1/8" dia brass/ GM ferrule with following dia composite Strap Saddle in the CI/DI pipe line , cutting holes in brick/ stone / RCC masonary work , repair the broken holes , cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0mtr /10 mtr respectively ) & fittings , 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in Charge.

House Connection

Please Enable Macros to View BoQ information