REPAIR TO RCC SUMP SEDIMENTATION TANK AND PUMP HOUSE BLDG IN ZONE B C J N AND O AREA AT MIL STATION AGARTALA

Amount

Schedule'A' Part-I: B&R works

M&L for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc( Plastered or un plastered surfaces) and applying one coat of white (lime) wash complete all as specified.

All as per item No 01 above butt one coat of white wash on ceiling .

M&L for preparation of old decorated surfaces of walls and applying one coat of oil bound distemper.

M&L for preparation of old /new surfaces of walls including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of cement base paint.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint.

Taking down cement or cement lime plaster of any description on brick walls or stone walls etc including raking out joints hacking for key, scrubbing down with water etc.

M&L for 15 mm thick cement plaster in CM 1:4 as on chajjas, beam, balcony fins etc with hard drawn wirefebric mesh where required to make up to original shape at any height complete all as specified and directed by Engineer - in - Charge.

S&F in repair Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed

Hacking out old broken glass( any thickness,size,quality) or description from wooden. Steel frame all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty/beads in square N.exc 0.5Sqm in each pane all as specified and directed

S&F for 4mm thick figured glass, pin head type and glazing with oil putty/beads in squares n exc 0.5sqm in each pane all as specified and directed.

S&F M S butt hinges 100mm size medium weight cold rolled all as specified and directed

S&F in repair M S butt hinges 75mm size medium weight cold rolled all as specified and directed

S&F In repair 200mm aluminium anodized, barrel tower bolt of extruded section and fixed all as specified and directed.

S&F in repair 150mm aluminium anodized, barrel tower bolt of extruded section and fixed all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised 125mm long all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt of size 300mm with hesp,staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy all as specified and directed.

Welding in repairs exc 2.5cm but n.exc 5cm in length thickness of welding Exc 6mm to but Nexc 9mm in all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 75mm thick Cement concrete type C-2, 1:3 :6 ( 40 mm graded stone aggregate) as in plinth protection, sub base finished even and smooth without using extra cement.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, All as specified and directed.

M&L for cement concrete(1:3:6) Type C2 in foundations, filling and mass concrete.

S&F coloured Glazed ceramic tiles in vertical surface 300X 200X 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified.

M&L applying two coat of weather coat on old new plastered surface of wall over a coat of primer including removal existing treatment and preparation of old or new plastered surface to receive paint complete all as specified and directed.

S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs

S&F Bib taps 15 mm dia, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe fixed in repairs

S&F Stop valves 15 mm dia, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions fixed in repairs fancy type chromium plated complete all as specified and as directed.

S&F 10 Litre PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle with plush pipe including brackets, All as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F Vitreous China urinals of size 465X355X265mm bowl type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement: fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and fixed in repairs

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 sq. m each complete all as specified and as directed.

S & F solid PVC door Frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawings complete all as specified.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified.

S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 150 mm long Aluminium anodised, barrel tower bolts of extructed section and fixed

S&F 100 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed

S&F Aluminium bow handles, cast type, anodised 125 mm long

M& L for Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing applying neat cement slurry @ 3 Kg/Sqm of cement mixed with liquid type water proofing compound on dry concrete surfaces including 15mm thick screed bed for in Cm 1:4 and mixed with liquid water proofing compound incl finishing the surfaces even and smooth without using extra cement (water proofing compound shall be measured and paid separately @ 200ml/50Kg of cement )

Supply of liquid integral water proofing compound Make : Dr fixit LW(+)

M/S PAUL ENTERPRISE

M/S SANKAR GOPE