SPECIAL REPAIRS TO JOINERY AND IMPROVEMENT TO INTERNAL AND EXTERNAL WALL SPECIFICATION OF BUILDING NO P-160 (NURSING OFFRS MESS) AT INHS SANJIVANI NAVAL BASE KOCHI

Amount

Taking down door chowkats with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) all as specified and as directed.

Taking down Chowkats or frame (without taking off shutter from the frame) n.exc. 1.50 Sqm all as specified and as directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc. complete (Minimum thickness of powder coating 50 micron) all as specified and as directed.

S& F Alluminium anodised DECO Grill 10mm thick DG 104 fixed with necessary H/F/H channel etc complete all as specified and directed. (Note : Deco grill fixed with windows with all fittings as directed by Engr -in- charge)

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S & F sheet glass ,plain 4.80mm thick n. exc 0.5 sqm in each pane ,glazing all with aluminum beading, glazing pin etc complete all as specified and directed.

S&F stainless wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Demolition of brick work built in Cement mortar, including all quoins,arches,pillors etc all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, Type C1, 1:3:6 (20mm graded stone aggregate)complete all as specified and as directed.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:6, Type C1 1:3:6 (20mm graded aggregate) complete all as specified and as directed.

M&L for rendering in CM 1:6, 10mm thick finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 15 mm(10+5) thick on fair faces of brick work or concrete surface in CM 1:4, finished even and smooth without using extra cement all as specified and as directed.

M&L for distmepering two coats over a coat of primer including preparation of new surfaces of walls including preparation of surface(Make: Asian- Tractor acrylic/ Berger-Bison/ Dulex- supersmooth)

M&L for preperation of new plaster surfaces of walls and applying two coats of cement based complege all as specified and as directed .

M&L for complete removal of existing treatment and preparing old surface and applying three coat white washing on surfaces of ceiling all as specified and as directed.

M&L for applying 3mm thick wall care putty on all internal wall surface all as specified and as directed .(Make: J K wall putty/Asian acrylic putty/Berger wall putty)

M&L for complete removal of existing treatment preparing old surface and applying 2 coat of oil emulsion distemper on wall including priming coat all as specified and as directed.

M&L for complete removal of existing treatment and preparing old surface and applying 3 coat of whitewash complete on wall(toilet, store etc) all as specified and as directed.

M&L for one coat of cement paint including preparation of old surface of wall (Compound wall) all as specified and as directed.

M/L for complete removal of existing treatment by brushing, rubbing down with water including scrapping down on external wall surfaces all as specified and directed by Engr in Charge

M&L for preparing of old treated surfaces of external walls and applying 2 coat of Apex Ultima Protek system of Asian paint or equivalent of Berger/Nerolac/Dulux over a coat of antifungal primer duly applied through company authorised applicator or under company supervision using modern tools and techniques all as specified and as directed Note :- contractor shall submit performance Guarantee for period of five years complete all as specified.

M&L for applying crack filling sealant over external wall surfaces ande finishing the surfaces to match with existing surfaces, all as specified and as directed. ( Make: BASF/ IWL/Fosroc)

Aarjay Tech Engineering

Classic Builders

AMRITH ENGINEERS

Albert Rebello and Company

ELLIKKAL ENTERPRISES